1 hanger

Hanger for Strongsuspended base units, this hanger supports heavy loads up to 240 kg (nominal load capacity 120 kg per hanger. Standard EN 15939 in test frame type B).
Perfect for use in any type of furniture in your home, such as kitchen, bathroom or auxiliary furniture.

The hanger must be used with the plate and the lower brackets, these references are supplied separately.
To assemble the hanger and the plate in the upper part, a previous machining must be carried out on the module, which does not interfere with the operation of the upper drawer.
The support for the lower area includes 3D adjustment, vertical, horizontal and depth, there are two types of lower supports, one for the assembly of furniture at a distance of 32 mm from the wall and another model at a distance of 3 mm. No pre-machining is necessary with these brackets.

The following video shows how you can easily install a Strong hanger.

The bottom Strong 32 mm bracket is designed to offer greater adjustment of the position of the unit horizontally and vertically. However, for this unit bracket, it is necessary to have the back part at a minimum distance of 32 mm in relation to the fastening wall.The bottom Strong 3 mm bracket has less adjustment and the back part has to be kept a minimum distance of 3 mm from the fastening wall.

The Strong hanger can carry loads of up to 240 kg (120 kg per hanger), complying with EN 15939 under type B test frame. This makes it an ideal solution for heavy duty suspended furniture.

This hanger is compatible with any type of suspended kitchen, bathroom or auxiliary furniture, offering a versatile and robust solution for installations where maximum security and resistance are required.

To install the hanger, machining is required on the module for anchoring at the top and fixing the plate. In addition, the back must be 3 mm from the wall to allow the correct use of the lower brackets (not included).

The Strong system offers triple adjustment (height, depth and sideways), which allows precise adjustment of the module even after installation, without the need to dismantle it. Its zinc-plated steel structure makes it corrosion resistant and long-lasting.

The hanger is available in packs of 50 units, with a zinc-plated finish that guarantees resistance to oxidation, facilitating its handling in professional assembly lines and installations in demanding environments.