2 aluminium profiles, 4 plastic side adapters, 4 plastic dividers, assembly instructions

Organize your furniture with this set of adjustable drawer dividers. It allows you to optimise and organise the interior space of your drawers in the kitchen, bathroom, bedroom, etc.

These drawer organisers are initially designed for 600mm or 900mmwide modules and a minimum drawer depth of 350mm. It has the advantage that it can be adjusted to smaller widths by cutting the aluminium profiles included.

Compatible for mounting:

- On square brackets of Vertex and Concept range by Emuca.

- On the side brackets of 178mm from Vertex drawers.

- On the side brackets of 185mm from Concept drawers.

- Any square brackets with 13mm width.

- Any straight rib with a minimum interior height of 135mm and width of 13mm.

Easy to assemble because no tools are required. Made of aluminium and plastic with a white or grey anthracite finish.

The supply includes: 2 aluminium profiles, 4 plastic side adapters, 4 plastic dividers and assembly instructions.

The Vertex-Concept drawer divider pair is a versatile and adjustable solution for optimising interior space in kitchen, bathroom and other drawer units. Designed for 600mm or 900mm wide modules and drawers with a minimum depth of 350mm, they allow you to adjust the layout by cutting the included aluminium profiles.

For manufacturers, these units offer a flexible solution for customised designs, keeping costs competitive and facilitating mass production.

Wholesalers and distributors will appreciate their versatility and ease of storage, as well as their compatibility with drawers from Emuca's Vertex and Concept ranges.

Carpenters and small businesses will appreciate the easy tool-free installation and the ability to customise the size to suit specific projects.

Digital retailers can benefit from dropshipping-optimised packaging, offering a practical and functional product for e-commerce.

The kit includes 2 aluminium profiles, 4 plastic side adapters, 4 plastic dividers and assembly instructions.

The profiles are made of aluminium, and the side adapters are made of plastic with a painted finish, which guarantees strength, lightness and a functional design.

The kit is initially designed for depths of 350 mm, but is not compatible with depths shallower than this.

It is compatible with square rails from the Vertex and Concept range, 178 mm Vertex drawer sides, 185 mm Concept sides and straight ribs of other heights such as 13 mm.

The widths are adjusted using the included aluminium profiles, which allow the length to be modified according to the requirements of the drawer.

Yes, as long as you have a 13 mm wide square railing , or a straight rib with a minimum internal height of 135 mm and width of 13 mm. If I have a 800 mm wide module, and a 16 mm thick side panel.

The formula is: internal module width -70. For this particular case, the internal width of the module will be 800 - 32 = 768 mm. From this measurement we subtract 70 to get the length to cut the profiles = 666 mm.