The front profile for interior drawer is the most visible part of the Vertex model drawer, it is located in its front area by means of a set of hooks, also, it may or may not go with a banister according to the customer's need. It is 1.10 m long and comes in different presentations depending on the height required, from 83 mm to 178 mm. It is made of aluminum, a light and resistant material, so despite the final size of the drawer it will not weigh too much.

The following video shows how you can easily assemble the Vertex inner drawer.

Yes, it is the same profile that is used for all four drawer heights. The 178 mm height panel, however, also needs the front rail profile.

It depends on the type of front panel you use for the interior drawer:- Aluminium front. This is fitted onto guides at the usual distance, 37 mm in the 4th hole of the guide.- Particle board front. The thickness of this board must be added to the 37 mm of the 4th hole of the guide.In other words, if the front is 19 mm thick, the guide must be fastened at 37 + 19 = 56 mm at the 4th hole of the guide.