To install a 131mm high interior drawer you will require a front attachment kit to secure the front panel to the Vertex drawer. Its installation is simple and is done by screwing them on each side of the panel. They will provide resistance and security to it, immobilizing it and adjusting it to its place. Made of white plastic, they will effectively withstand the passage of time, as it is a durable material, while easy to clean, so its appearance will always remain as it was new.

The following video shows how you can easily assemble the Vertex inner drawer.

It depends on the type of front panel you use for the interior drawer:- Aluminium front. This is fitted onto guides at the usual distance, 37 mm in the 4th hole of the guide.- Particle board front. The thickness of this board must be added to the 37 mm of the 4th hole of the guide.In other words, if the front is 19 mm thick, the guide must be fastened at 37 + 19 = 56 mm at the 4th hole of the guide.