The metallic gray lifting piston is a piece made of steel and plastic, finished in aluminum. Its function is to lift and contain the closet door. It has a bearing force of up to 8 kg and can be used for wooden doors and Aluminum. Must be used for module and door from 16 to 19mm thick and straight cup hinge with 15mm overlap. This system contains the closing of the door with its damping system. In the case of installing doors with a width greater than 450mm, the use of 2 shock absorbers is recommended. Each package contains a total of 20 units.

We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.

For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.