The Smart LED switch/dimmer sensor SIMPLE is designed to control the switching on and off of 12V or 24V DC LED luminaires.

This sensor has a dual function, as a switch that is activated by passing a hand in front or as a proximity sensor that is activated with a door, depending on the desired use. In this way, the sensor turns the luminaire on or off when its 6cm detection range is interfered with, making it ideal for use in the kitchen to turn on the luminaire without contact for the user. Additionally, it has a dimmer function, which dims or increases the brightness of the luminaire through a short or prolonged approach.

This sensor can be connected to a Smart converter through the control port, allowing simultaneous switching on and off of all luminaires connected to the converter with a single sensor. In this type of installation, the admissible power limit of the sensor is removed, and the limit is determined by the maximum power of the converter.

Alternatively, the sensor can be connected to the converter via the 6 secondary ports or outputs with Miniled connection, allowing independent switching on or off of the luminaires with a single converter. In this type of installation, the sensor has a maximum admissible power limit of 36W at 12V DC and 72W at 24V DC.

Its installation is very versatile, thanks to its small-sized head that is embedded in the furniture with a diameter of 8mm. It is made of black-finished plastic, comes with a 1.5m cable with Miniled connections, and an additional 1m cable for the lens. It also has low power consumption and protection against electrical and electromagnetic interference, ensuring stable operation.