The Lynx Basic (12V DC) LED strip is designed for efficient and long-lasting lighting in a wide variety of spaces, furniture and work areas. It stands out for being a very efficient luminaire that works at 12V DC, therefore it requires a constant voltage LED converter and power cable.

This LED strip has a power of 9.6W/m , an IP20 degree of protection suitable for indoor use. It is supplied in continuous dimmable rolls that can be cut every 3 LEDs, to adjust the length to the project and thus reduce waste.

It is made of plastic with a double-layer PCB and a 3M® 300LSE adhesive tape for fixing that provides easy installation with the best adhesion.

Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.

With this table you can calculate the total power of an LED strip.

The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.

In order to choose the correct converted for an LED strip it is necessary to: - Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons. - Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation. For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip: X= (2m x 24W) / 5m = 9,6W Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.