LED Strip 4x11 Neonlynx V 7,6W/m IP65 (24V DC), length 1.008mm, Natural White light 4.000K, Plastic

5204220 / 8432393136073
Essential products
HLColour temperaturePowerPackagingFinishingSKU
1.008 mmCold white 6.000 K7,6 W / m8 Unit
Not defined
5206320
3.024 mmCold white 6.000 K7,6 W / m2 Unit
Not defined
5206420
5.040 mmCold white 6.000 K7,6 W / m2 Unit
Not defined
5206520
1.008 mmNatural white 4.000 K7,6 W / m8 Unit
Not defined
5204220
3.024 mmNatural white 4.000 K7,6 W / m2 Unit
Not defined
5204320
5.040 mmNatural white 4.000 K7,6 W / m2 Unit
Not defined
5204420
1.008 mmWarm white 2.700 K7,6 W / m8 Unit
Not defined
5206020
3.024 mmWarm white 2.700 K7,6 W / m2 Unit
Not defined
5206120
5.040 mmWarm white 2.700 K7,6 W / m2 Unit
Not defined
5206220

Product features

  • Neonlynx flexible LED strip designed to make curved or straight shapes in 4mm wide by 11mm deep.
  • Power supply: 24V DC. It requires a 24V DC LED converter for installation (not included in the supply).
  • Index of protection IP65, suitable for installation in damp places.
  • Luminaire with LED technology with an efficiency of 49 lm / W.
  • Natural white color temperature 4,000 Kelvin. Lighting angle: 120°.
  • It has 128 LEDs / m. Luminous flux of 375 lm / m. Power 7.6 W / m.
  • Supplied in continuous rolls of 1,008 mm. It is dimmable and can be cut every 63 mm.
  • It has two 1.5 m power cables, one on each side of the LED strip, with a miniLED connector for connection to the converter.
  • Made of high quality silicone to avoid variation in color temperature.

The Neonlynx flexible LED strip is designed to make curved or straight shapes in 4 mm wide by 11 mm deep recesses, achieving maximum integration in the furniture. It stands out for being a very efficient luminaire that works at 24V DC, so it requires a constant voltage LED converter.

It is made from high-quality silicone to prevent colour temperature variation and has an IP65 protection rating, suitable for installation in damp places. It is supplied in continuous rolls of 1, 3 or 5 metres. It also has two 1.5 m power cables, one on each side of the LED strip, with a miniled connector for connection to the converter. This facilitates installation and optimises waste, as it can be cut to use both ends, without the need for additional cables or soldering.

Components

1 LED strip

Documentation

PowerInputOutputPackagingFinishingSKU
15 W220-240V AC - 50-60Hz24V DC4 UnitNot defined5152420
30 W220-240V AC - 50-60Hz24V DC4 UnitNot defined5152520
60 W220-240V AC - 50-60Hz24V DC4 UnitNot defined5152620
90 W220-240V AC - 50-60Hz24V DC4 UnitNot defined5152720

FAQ


Yes, it can be cut every 63 mm.It also shows cutting marks in one of the strip sides, since it has a more transparent area where the darker side shows the cutting areas.Since the strip has cables on the two sides, each strip has to be cut in 2 pieces, to have a cable on each side.If you need additional cuts, the waste can be used connecting the strip with the 8 mm Lynx Q or the Lynx H cable or by welding the strip.

The minimum hole diameter to be made is 7 mm for the male Miniled connector to go through.If you have a female connector, the hole has to be 9 mm.