1 LED strip

The Neonlynx flexible LED strip is designed to make curved or straight shapes in 4 mm wide by 11 mm deep recesses, achieving maximum integration in the furniture. It stands out for being a very efficient luminaire that works at 24V DC, so it requires a constant voltage LED converter.

It is made from high-quality silicone to prevent colour temperature variation and has an IP65 protection rating, suitable for installation in damp places. It is supplied in continuous rolls of 1, 3 or 5 metres. It also has two 1.5 m power cables, one on each side of the LED strip, with a miniled connector for connection to the converter. This facilitates installation and optimises waste, as it can be cut to use both ends, without the need for additional cables or soldering.

The Neonlynx V 4x11 LED strip is designed for curves or custom shapes, offering high flexibility and IP65 protection, perfect for wet environments.

For manufacturers, it has an output of 7.6W/m, is made of high quality silicone, and is supplied in 5 metre rolls with cut-off points every 3.6cm.

Wholesalers and distributors will appreciate its efficient design and ease of installation, thanks to the 1.5 metre power cables included.

Carpenters and small businesses will enjoy its simple assembly, adapting to decorative and functional projects with uniform Lighting.

Digital distributors will be able to market this LED strip in e-commerce as an innovative and versatile solution, with dropshipping ready packaging.

Yes, it can be cut every 63 mm.It also shows cutting marks in one of the strip sides, since it has a more transparent area where the darker side shows the cutting areas.Since the strip has cables on the two sides, each strip has to be cut in 2 pieces, to have a cable on each side.If you need additional cuts, the waste can be used connecting the strip with the 8 mm Lynx Q or the Lynx H cable or by welding the strip.

The Neonlynx LED strip has an output of 7.6 W/m, an efficiency of 49 lumens per watt, and 126 LEDs per metre. These features provide uniform, high quality illumination, ideal for both decorative and functional applications.

The IP65 certification ensures that the LED strip is dust and water resistant, making it suitable for installations in wet locations such as bathrooms, kitchens or semi-covered areas. This ensures durability even under splashing conditions.

The strip can be cut at marked 63 mm intervals to suit the needs of the project. Cuts should be made with suitable tools to avoid damage, and connections can be made using the included miniLED connectors or soldering, ensuring proper insulation.

A 24V DC LED converter with sufficient capacity to handle the total power of the installed LED strip is recommended. For example, for a 3 metre roll (22.8 W), a converter that handles at least this power with an additional safety margin is required.

The strip is made of high quality silicone, which ensures colour temperature stability and resistance to humid environments. This flexible material also allows installations in curved or straight shapes, increasing the possibilities of design and durability.

The minimum hole diameter to be made is 7 mm for the male Miniled connector to go through.If you have a female connector, the hole has to be 9 mm.