The difference between the hidden Slippe rails with a hook as opposed to those that do not have a hook, is the possibility of disassembling the drawer with a simple click.

The adjustment of the hidden runners for Slippe drawers without a hook is achieved by turning the washer on the front fastening pivot, which is screwed for that purpose.

Yes, they are compatible. But, it is necessary to bear in mind that the Lynx sensors have different dimensions.In the case of the Motion sensor, the position of the lens has been changed but the dimensions have been maintained. When it comes to machining the diffuser it is necessary to bear in mind that the lens protrudes from it, the diameter of 10 mm is maintained but the position changes to 15 mm.In the case of the Touch and Dimmer sensors, there are no changes that affect assemble and the new Lynx sensor can be mounted where the previous sensor was mounted.

The following video shows how you can easily install the aforementioned LED lighting.

The touch sensor for LED strips has a detector that reacts when a human hand approaches it.The light will switch on when the sensor detects a human hand within an area of 0 to 2 mm and it will switch off when it detects it again.The sensor self-calibrates using potential difference, that is to say, its takes into account the objects and the distance between the hand and the sensor the first time it is turned on.If you want to change it, you need to reset the sensor. To do that, you need to disconnect the touch sensor from the electrical network (by disconnecting the sensor from the converter from the network or the power control switch of the residence), wait for 5 seconds and connect it again so that the sensor auto calibrates.

The sensor automatically switches the light on when it detects movement of a human body within its detection range and switches it off after 30 seconds without detection.

Detects motion in a range adjusted to human movement, ideal for profile and furniture applications.

The light remains on for 30 seconds after motion detection ceases.

It is compatible with 8 mm wide LED strips for both 12V DC and 24V DC systems.

Includes a motion sensor, a MINILED distributor with 6 inputs, screws and a 1.5 m cable with Miniled connection.

The RF emitter with Smart motion sensor detects the presence of a human body within its detection range. When activated, it switches the luminaire on and automatically switches it off after 30 seconds if no further motion is detected.

The sensor has a detection range of 90° and a length of 2.5 metres, allowing it to detect movement over a wide area. It keeps the luminaire active as long as it detects presence in its range.

It is possible to pair a transmitter with up to 6 receivers, and a receiver can be connected to up to 6 transmitters. This makes it possible to manage several luminaires in a flexible and practical way.

It is powered by a CR2450 battery, which provides up to 600 on/off cycles or 16 months standby time. The battery can be easily replaced when needed.

It is installed with double-sided adhesive or screws, both included. It is ideal for spaces such as corridors, staircases, dressing rooms and wardrobes, where automatic switching is particularly useful and efficient.

The kit is designed to install wooden sliding doors with top runners, suitable for cabinets with 16 mm thick boards. It does not require pre-machining and is easily fixed using clips included in the kit. The top and bottom runners have a length of 2.35 metres, allowing them to be used in large wardrobes.

The system is designed to support doors weighing up to 30 kg each, ensuring smooth and safe operation. This makes it ideal for heavy duty enclosures in domestic or commercial environments.

The system includes a soft-close mechanism integrated into the carriages, which reduces the impact of closing the doors and improves the life of the slides. Matt anodised materials ensure corrosion resistance and a durable appearance.

The kit is designed for quick and easy installation without the need for specialised tools. Only a screwdriver is required to attach the clips and assemble the guides, making assembly easy for carpenters and distributors.

The Flow system includes components designed to ensure safe use, such as the carriages with cushioned locking and deformation-resistant slides. Although no specific certification is detailed in the data sheet, the materials and design meet the usual quality standards in the furniture industry.

The vertical profiles act as a link between the upper and lower guide rails, ensuring the correct functioning of the folding and folding door system.

It is compatible with doors weighing up to 20 kg or 25 kg, depending on the model, and heights ranging from 1200 mm to 2700 mm, with board thicknesses between 18 mm and 26 mm.

Yes, the product includes two lengths of profiles that can be adapted according to the height of the door, allowing flexible configurations for different applications.

It is essential to combine it with the basic hardware set, the opening system (Push or Pull) and the rail set. Reinforcement and centring profiles are optional to increase stability.

It is made of matt anodised aluminium, which provides high durability, wear resistance and a modern finish that enhances the aesthetics of the furniture.

The bin has a capacity of 13 litres, making it suitable for domestic use and recycling in small spaces.

Yes, the cube is compatible with both left and right opening doors, adapting to different furniture configurations.

The cabinet must have a minimum internal width of 400 mm in order to install the recycling bin correctly.

Yes, the system is designed so that the bin lid opens automatically when the cabinet door is opened, making it easy to use.

The bucket is made of sturdy plastic with white, grey or stainless steel finishes, ensuring durability and modern aesthetics.

The bracket with expansion screw is designed to secure the mounting of the Gola profile to the furniture module, providing a safe and strong system.

The expansion screw allows the bracket to be firmly fixed to the profile and the module, ensuring a stable and reliable installation in different configurations.

Yes, this bracket is compatible with all Gola profile systems used in kitchen units and furniture.

The bracket is made of steel with a zinc-plated finish, ensuring durability and corrosion resistance.

The packaging includes 50 units of brackets with expansion screws, ready for installation in furniture projects.

The Austin furniture handle has a total length of 184 mm, which gives it an elegant and functional design for different types of furniture.

The Austin handle is made of aluminium, a light and strong material, ideal for use in furniture.

The distance between the fixing holes is 128 mm, making it compatible with common standards in the furniture industry.

Yes, the matt chrome finish is wear resistant and provides additional protection against corrosion, maintaining its appearance for a long time.

Yes, the handle includes the necessary screws (M4 screws) for quick and easy installation.

The Xirivella handle is made of aluminium with a matt anodised finish, which guarantees resistance and a modern design.

The handle has a length of 64 mm and an interaxis of 32 mm, ideal for various furniture applications.

Yes, the Xirivella handle is perfect for kitchen, bathroom, home and office furniture, thanks to its versatile and durable design.

Yes, the product includes M4 screws required for easy and secure installation.

Yes, the Xirivella handle can be installed both horizontally and vertically, adapting to different furniture designs.

The Nantes handle is made of aluminium, which guarantees durability, strength and lightness.

The Nantes handle has a length of 198 mm and an interaxis of 128 mm, making it ideal for different furniture designs.

Yes, the Nantes handle is versatile and suitable for kitchen, bathroom, home and office furniture, offering functionality and style.

Yes, the product includes M4 screws required for easy and secure installation.

The Nantes handle has a stainless steel anodised finish, which gives it a modern and elegant design.

The Orlando handle is made of steel with a black painted or satin nickel finish, ensuring durability and a modern design.

The mounting hole spacing of the Orlando handle is 128 mm.

The set includes 10 handles and the M4 screws required for installation.

Yes, the Orlando handle can be installed in both horizontal and vertical orientation, adapting to different types of furniture.

Each handle is individually packed to avoid knocks and scratches during transport.

The Syracuse handle is made of zamak with a chrome-plated finish, ensuring durability and a modern design.

Yes, the handle can be installed either horizontally or vertically, depending on the needs of the furniture.

The product includes a handle and M4 screws for installation. In addition, each handle is individually packaged to avoid scratches.

It is ideal for drawer fronts and cupboard doors in kitchen, bathroom, home and office furniture.

Currently, the Syracuse handle is only available in 145 mm length with chrome finish.

The handles are made of hollow stainless steel with a black painted finish, ensuring durability and a modern design.

Yes, the handles can be installed either horizontally or vertically, depending on the needs of the furniture.

The set includes 10 handles and the M4 screws required for installation.

Each handle has a length of 220 mm and an interaxis of 160 mm, adapting to different furniture designs.

The handles are individually packed to avoid scratches and to ensure their quality during transport.

The Kansas handle is made of zamak with a satin nickel finish, giving it a modern and durable design.

Yes, the handle can be installed either horizontally or vertically, depending on the needs of the furniture.

The package includes 1 handle and the M4 screws required for installation.

The handle has a length of 140 mm and a 96 mm spindle, ideal for various types of furniture.

The handle is individually packaged to avoid scratches and ensure it arrives in perfect condition.

The Veracruz handle is made of zamak with a matt chrome finish, which gives it a modern design and high durability.

Yes, this handle can be installed either horizontally or vertically, depending on the needs of the furniture.

The package includes 1 handle and M4 screws for installation.

The handle has a length of 150 mm and a spindle of 128 mm, perfect for different types of furniture.

Each handle is individually packed to protect it from knocks and scratches during transport.

The Casablanca handle is made of zamak with an elegant antique gold finish, combining classic design and durability.

Yes, this handle can be installed both horizontally and vertically, adapting to the needs of the furniture.

The package includes 1 Casablanca handle and M4 screws for installation.

The handle has a total length of 116 mm and a 96 mm spacing, ideal for various furniture applications.

Each handle is individually packed to avoid scratches or knocks during transport and handling.

The Doha handle is made of zamak with an elegant antique gold finish for modern design and durability.

Yes, the handle can be installed both horizontally and vertically, adapting to the needs of the furniture design.

The package includes 1 Doha handle and M4 screws for installation.

The handle has an overall length of 110 mm and a 96 mm spindle, suitable for multiple furniture applications.

Each handle is individually packed to protect it from knocks and scratches during transport and handling.

The Burton knob is made of zamak, a strong and durable material ideal for use on furniture.

The Burton knob is finished in satin nickel, providing a modern and elegant look.

Yes, the knob includes M4 screws for easy installation.

The knob has a total length of 40 mm and an interaxle of 32 mm and is compatible with many furniture designs.

Each knob is individually packaged to prevent knocks, scratches and to ensure it arrives in perfect condition.

The set includes 25 furniture knobs, made of zamak, together with M4 screws for installation.

The knobs are made of zamak and have an elegant bronze finish, ideal for classic or vintage styles.

They are ideal for drawer fronts and cupboard doors in kitchen, bathroom, home or office furniture.

The knobs include M4 screws, specifically designed to ensure a secure and stable installation.

Each knob is individually packed to avoid knocks or scratches during transport and storage.

The Mombasa handle includes a zamak handle and an M4 screw for installation.

The handle is made of zamak with an antique gold finish, which gives it a classic and elegant design.

The handle can be installed either horizontally or vertically, depending on the furniture design.

The handle includes M4 screws, designed for secure and efficient fixing to furniture made of different materials.

Each handle is individually packed to avoid knocks and scratches during transport and storage.

The Luanda knob includes a knob made of zamak with an antique gold finish and an M4 screw for installation.

The knob is made of zamak and has an elegant antique gold finish, ideal for both classic and modern styles.

The Luanda knob is designed for installation on drawer fronts and cupboard doors, making it ideal for kitchen, bathroom, home and office furniture.

The included screws are of type M4, offering a secure and efficient fastening in various furniture materials.

Each knob is individually packed to ensure protection against knocks and scratches during transport and storage.

The knobs have dimensions of 20x20 mm, ideal for drawer fronts and wardrobe doors.

The knobs have a chrome finish for a modern look and high resistance to everyday wear and tear.

Yes, the set includes M4 screws necessary for the installation of the knobs, facilitating the assembly.

These knobs are ideal for kitchen, bathroom, home and office furniture, adapting to different styles and environments.

Each knob is individually packed to avoid knocks and scratches during transport and storage.

The Idaho knob has dimensions of 40x40 mm, ideal for complementing drawer fronts and wardrobe doors.

The knob has a gloss titanium finish, which offers a sleek, modern design and resistance to wear and tear.

Includes M4 screws, specifically designed for easy installation in different types of furniture.

Yes, the Idaho knob is designed for use on kitchen, bathroom, home and office furniture, adapting to various decorative styles.

Each knob is individually packed to avoid knocks and scratches during transport and storage.

The Osaka handle has a length of 160 mm and a 96 mm spindle, ideal measurements for a comfortable and aesthetic installation.

It is made of aluminium with a dark grey finish, which provides strength and a modern and sophisticated design.

Yes, the Osaka handle is designed to be installed both horizontally and vertically, adapting to various furniture configurations.

Includes M4 screws, which ensure easy installation and compatibility with different types of drawer fronts and doors.

Each handle is individually packed to avoid knocks and scratches during transport and storage.

The Ribarroja handle has a length of 144 mm and an interaxis of 128 mm, ideal measurements to guarantee functionality and aesthetics in its installation.

It is made of zamak with a black painted finish, offering a modern design and high resistance.

Yes, the Ribarroja handle can be installed both horizontally and vertically, adapting to the needs of the furniture design.

Includes M4 screws for easy assembly and compatible with different types of drawer and door fronts.

Each handle is individually packed to prevent knocks or scratches during transport and storage.

The Varadero batch knobs have a diameter of 25 mm, making them ideal for a wide variety of applications.

They are made of zamak, a strong and durable material. Available finishes are titanium and old gold.

The set includes 20 furniture knobs, including M4 screws for installation.

Yes, the knobs are compatible with kitchen, bathroom, home and office furniture, adapting to different decorative styles.

Each knob is individually packed to avoid knocks or scratches during transport and storage.

The Baltimore handle has an overall length of 211 mm and a 192 mm centre-to-centre distance, ideal for modern furniture.

It is made of zamak, a resistant material, with chrome and titanium finishes available.

Yes, it can be installed in both horizontal and vertical orientation, adapting to different furniture designs.

The handle includes M4 screws for easy installation in doors or drawers.

Each handle is individually packed to avoid knocks or scratches during transport.

The Damascus handle has a length of 149 mm and an interaxis of 128 mm, designed to fit contemporary furniture.

It is made of zamak with a satin titanium finish, ensuring durability and modern styling.

Yes, it can be installed in both horizontal and vertical orientation, adapting to various design needs.

The handle includes M4 screws for easy installation on doors and drawers.

Each handle is individually packed to avoid scratches and damage during transport.

The Portland knob has a diameter of 24 mm, ideal for small to medium furniture applications.

It is made of zamak with a chrome-plated finish, which gives it durability and a modern design.

The packaging includes a knob and M4 screws for installation, ready to use.

Yes, it is suitable for installation on cabinet doors and drawers in kitchens, bathrooms, offices or any furniture.

The Portland knob is individually packed to avoid scratches or damage during transport and storage.

The Lagos handle has a length of 145 mm and a spacing of 128 mm, perfect for furniture of different sizes.

It is made of zamak with a black painted finish, which gives it a classic and resistant design.

The handle can be installed either horizontally or vertically, depending on the furniture design.

Yes, the M4 screws required for mounting are included in the product packaging.

Each handle is individually packed to avoid knocks and scratches during transport and storage.

The following video shows how the sliding door system for wardrobes is assembled.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

No, a Supra bottle rack can only be assembled on the left-hand side, as you have the guide rails on the left-hand side.

The following video shows how you can easily assemble the profile system Gola.

The following video shows how such a system is easily assembled:

The following video shows how such a system is easily assembled:

The following video shows how such a system is easily assembled: