8 Wedges, 16 screws 3,9x6.5

The Placard fittings are pieces that are placed between the profile and the glass panel to act as a stop and secure the panel so that it cannot move in the door. These are easily installed and are an essential product for this type of door. It is a piece that can be used for various types of profiles depending on the orientation that is installed. Its dimensions are 12mm deep and 6mm high and can be positioned for 4mm thick panels with 6mm and 12mm gaps As also in 10 mm thick panels with 6 mm of space, its packaging is one piece

The Placard Glass 6+4 and 12+4 fittings are designed to fix and secure glass panels on sliding doors. Their main function is to provide secure support and prevent movement of the panels.

For manufacturers, these fittings optimise assembly thanks to their simple and precise installation. Distributors and wholesalers will find them a highly functional and versatile product, while carpenters will appreciate their ease of adjustment. Digital distributors will be able to highlight them as an essential accessory for modern Glass systems.

Compatible with 4 mm thick panels, they offer 6 mm and 12 mm adjustments for different configurations. Add Placard Glass fittings to your catalogue to offer safe and elegant solutions for glass doors!

The following video shows how the sliding wardrobe door system is assembled.

There are two types of hardware used to make glass doors in the Placard sliding wardrobe system: - Plastic wedges. They are pressed into the handle profiles together with the glass, using four wedges on each side of the door and the whole assembly is held in place. It is also recommended to use the trim profile (cod. 4001621 / 7917121) for the rest of the handle profile and for the crossbar if it has one. - The screws. They are used to screw the upper and lower profiles of the door to the handles, to the carriages and runners and to the Slowmove soft closing system. These screws are of the appropriate length so as not to damage the glass.

The kit includes 8 wedges and 16 3x9.5 mm screws, designed to hold the glass panels in place and secure their position in the Placard sliding system.

The parts are 12 mm deep and 6 mm high and are compatible with 4 mm thick panels with 6 mm and 12 mm spacing, as well as 10 mm thick panels with 6 mm spacing.

This kit is compatible with glass panels of different thicknesses, specifically 4 mm and 10 mm, according to the specifications of the Placard sliding system.

The following video shows how the sliding door system for wardrobes is assembled.

There are two types of fittings that are used to fit glass doors on the Placard sliding system for wardrobes: - Plastic wedges. They are put into the handle profiles using pressure along with the glass, using four wedges on each side of the door and leaving the set fastened. It is also recommended to use the fitting profile (code. 4001621 / 7917121) for the rest of the handle profile and the crossbeam if there is one. - Screws. They are used to screw the upper and lower profiles of the door to the handles, to the runners and the rollers and to the Slowmove closing. These screws are a correct length in order not to damage the glass.