We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

The elbow design allows for a partial overlap of the door, ideal for furniture with corner configurations or where space needs to be maximised without interference.

To ensure a secure fit, Euro screws must be installed in holes 5 mm in diameter and 12 mm deep, respecting the specified distances to maintain the stability of the hinge.

Three-dimensional adjustment ensures precise alignment, correcting misalignments in height, depth and laterality, which is essential for furniture that is subject to continuous or frequent use.

For perfect closing, the damped system requires correct cup adjustment and installation of the hinge within the drilling range of 3 to 7 mm, ensuring a smooth and silent movement.

Compatibility with 5x12 mm diameter screws ensures solid fastening in pre-drilled boards, facilitating assembly in systems with drill racks and guaranteeing the structural stability of the furniture.

This template set is compatible with Vertex, Concept and Convex drawers.

Templates allow precise marking of the position of the drawer front attachments, eliminating the need for manual measurements.

The kit includes only the marking templates, specifically designed to facilitate the installation process.

The inserts are made of durable plastic, ensuring durability and precision during use.

No pre-measurement is necessary, as the templates are designed for direct and precise marking without additional calculations.

The rear hooks allow rails to be fitted to drawers without the need to machine the side edges of the rear panel, facilitating installation.

The design of the fixture directly covers the side edges of the rear panel, eliminating the need for additional machining on the part.

With this set of rear hooks and a rail, it is possible to configure double or half-height drawers, adapting to different storage needs.

They are made of plastic with a durable finish, ensuring strength, lightness and an aesthetic appearance in keeping with the design of the drawer.

No, the accessory allows manual height adjustment without additional effort, offering an intuitive and efficient installation.

Silver L concealed slides are 340 mm deep and offer partial-extension, allowing efficient access to the drawer contents.

Silver L slides have a load capacity of 25 kg and are supplied in separate left and right hand versions.

These slides include an integrated locking pivot that prevents unintentional dismantling of the drawer, guaranteeing safety and stability.

They offer a vertical adjustment of +5 mm, which facilitates a precise adjustment of the drawer level in relation to the cabinet.

They are made of steel with a zinc plated finish, providing durability, corrosion resistance and a professional appearance.

It is important to ensure that the LED converter is compatible with the total power of the strip. For a safe installation, it is recommended to calculate the power consumption based on the 9.6W/m and add 20% extra capacity to the converter.

Yes, the LED strip can be cut every 3 LEDs. Cut only at the designated marks with insulated scissors and protect the exposed ends with suitable connectors or seal them to prevent short circuits.

The strip uses 3M™ 300LSE double-coated adhesive tape, which ensures strong and durable adhesion on clean, smooth surfaces. It is important to clean the surface with alcohol prior to installation for best results.

It is recommended not to exceed 5 metres per line without the use of signal amplification to avoid voltage drops that may affect the uniformity of brightness.

The IP20 rating is suitable for indoor use where it is not exposed to splashing water or excessive humidity. Ideal for furniture, shelving or indoor lighting.

The Kuma flexible spotlight uses energy-saving LED technology with a power of 2.1 W and energy efficiency class A++. It offers a colour temperature of 4,000 K (natural white) and a luminous flux of 150 lm, ideal for reading and work applications.

The integrated touch sensor allows the lamp to be switched on and off with a simple touch. In addition, with a long touch, the light intensity can be adjusted to suit different lighting needs.

The flexible spotlight arm has a lighting angle of 180 degrees, allowing the position and direction of the light to be precisely adjusted. This makes it especially functional for activities that require spot and adjustable lighting.

The two USB ports at the base of the spotlight are capable of simultaneously charging electronic devices such as mobile phones, tablets and other USB charging compatible equipment.

The kit includes 1 LED luminaire, a 30W constant voltage converter, and fixing screws. Installation is simple and instructions are included, making it easy to mount on desks, bedheads or other surfaces.

The Lynx flat diffuser profile is designed to completely cover the LED strips, allowing partial light to pass through thanks to its opaque white finish. This softens the illumination and eliminates visible light spots for a more uniform effect.

It has dimensions of 17.5 mm horizontal width and 5.7 mm vertical height, allowing it to perfectly cover standard LED strips while integrating unobtrusively into the design.

The diffuser profile is available in lengths of 2.35 metres and 3.9 metres, providing options to suit different project sizes.

It is made of plastic with an opaque white finish, which offers strength and a clean design, suitable for decorative and functional applications.

The package includes 20 units of the diffuser profile, ready for use. It is ideal for recessed or surface lighting projects in furniture, showcases and ceilings, where homogeneous and aesthetic lighting is sought.

IP44 is the name given to the index that a light or component has in order to protect itself against objects larger than 1 mm and that also have protection from liquid splashes in all directions. In this case, depending on the area where the lighting is located, it would be suitably for assembly in bathroom furniture.

The accessory for recessing in aluminium profile with curved diffuser improves the final finish of the mounting, providing a clean and aesthetic closure to the profile where the LED strips are installed.

The dimensions of the fitting are 12.7 mm high, 23 mm wide and 16.5 mm long overall. It is designed to fit perfectly into the 20 mm wide and 10 mm high profile channel.

It is made of grey plastic, which is strong, durable and easy to clean. This ensures good performance and a uniform appearance in the lighting system.

Installation is simple: the fitting is placed in the profile channel and the electrical connection cable of the LED strips is passed through it. Finally, the curved diffuser is press-fitted to complete the assembly.

The pack includes 20 units of the accessory, ideal for projects requiring aesthetic finishes on aluminium profiles with curved diffusers, such as furniture, showcases or decorative structures.

The fitting is 11.6 mm high, 23 mm wide overall, and 16.5 mm long, with a small overhang of 5 mm to facilitate fitting to the profile. These measurements ensure a precise fit and a professional aesthetic finish for the Lynx profile.

The kit is made of grey plastic, an impact resistant, durable and easy to clean material. This plastic is ideal for furniture applications due to its ability to maintain its shape and colour over time.

Installation is simple: first, the LED strip cable is fed through the hole in the fixture; then the fixture is snapped onto the profile, ensuring that it is fixed, and finally it is placed in the channel made in the furniture for a clean finish.

This kit is specifically designed for the Lynx recessed profile, ensuring perfect compatibility. It is not recommended for use with other profiles that do not belong to the same range.

For maintenance, it is suggested to clean the accessory with a soft cloth and non-abrasive products to avoid damaging the finish. This will help to preserve both its functionality and aesthetic appearance for a longer period of time.

The fixings are installed by screwing them directly to the furniture in the desired position. Once in place, the Lynx slanting profile snaps into place over the fixings, ensuring a firm and stable hold.

The kit allows the electrical connection of the LED strips in three ways: under the side cover, through a hole at a 90 degree angle, or through the back of the profile. It is recommended to use a drill to drill the necessary holes in the profile, ensuring that the wiring is properly insulated and protected.

All components are made of durable plastic, a lightweight and durable material that guarantees long-term performance. In addition, the grey finish provides a clean, unobtrusive look that matches the design of the profile.

Yes, both side covers and fasteners can be reused in the event of removal or relocation, provided they are kept in good condition. This makes them ideal for projects requiring flexibility.

The kit includes screws compatible with surfaces such as wood, MDF and other similar materials. The screws are designed to facilitate assembly, providing a secure fixing and preventing damage to the base material.

The side covers are easily fitted to the ends of the Lynx profile using the screws included in the kit. Once fixed, the LED strip cables are passed through the designed space and the profiles are snapped into place.

The kit includes screws suitable for mounting on surfaces such as wood, MDF and other similar materials. The screws are designed to provide a firm and stable fixing.

The side covers are made of durable grey plastic, which ensures durability and ease of cleaning, as well as providing an aesthetic finish that blends in with the design of the profile and furniture.

Yes, both covers and screws can be reused if the profile is dismantled or relocated, provided the components are in good condition. This makes them ideal for flexible or temporary installations.

This kit improves the aesthetics of installations by covering the ends of the profile, providing a clean and professional finish. It also facilitates cable management and ensures that the profile stays in place with easy installation.

The Crux LED spotlight requires a stable 12V DC power supply. It is necessary to use a suitable converter that supports the total power of the installed spotlights, considering 1.8 W per unit.

The spotlight is fixed to the furniture by means of its recessed design. It is important to drill a 60 mm diameter hole with suitable tools to ensure a perfect fit in materials such as wood, MDF or chipboard.

A 12V DC LED converter with a watt rating greater than the total power of the installed spotlights is recommended. For example, for 6 spotlights, the converter should handle at least 10.8 W (1.8 W x 6) with an additional margin for safety.

Yes, it is possible to combine 4500K and 6000K lamps in the same installation. However, it is recommended to plan the distribution to avoid visual inconsistencies and to maintain harmony in the illuminated space.

To maintain the performance of the spotlight, it is suggested to clean it periodically with a soft, dry cloth. Avoid using abrasive products that may damage the finishes and regularly check the electrical connections to ensure optimum performance.

The Lynx curved diffuser profile has a height of 17.4 mm, a width of 15.4 mm and a thickness of 5.9 mm. These dimensions allow the diffuser to fit perfectly over LED strips and to be securely clamped into the corresponding profile tabs.

The transparent-opaque plastic provides homogeneous light diffusion, reducing glare and shadows, while hiding the direct view of the LEDs. This enhances aesthetics and creates a soft and pleasant illumination.

Installation consists of placing the diffuser on the profile that houses the LED strip. This is done by pressure using the tabs of the profile as a support. No additional tools are required, but it is recommended to clean the surfaces before installation.

Yes, the profile can be cut to size using tools such as precision saws or plastic cutters. It is important to make clean cuts and avoid edge damage to ensure a good fit.

The curved design of the diffuser optimises light distribution, creating a more uniform effect and reducing bright spots. This makes it ideal for decorative and functional applications in furniture or interior spaces.

The kit includes 3 clips to attach the aluminium profile to the cabinet and 2 side caps to close the ends, providing a secure installation and a professional aesthetic finish. The clips are placed over the LED strip in the trunking and hold the profile securely in place.

This kit is specifically designed for the Lynx flat diffuser profile and is not compatible with other profile models in the Lynx range. Its design ensures a perfect fit with the corresponding profile.

The brackets are fixed directly to the furniture channel. It is important to ensure that they are correctly aligned and securely fastened before the aluminium profile is pressed onto them.

The kit's parts are made of durable grey plastic, which ensures durability and an unobtrusive appearance that matches different furniture designs. This material is also easy to clean and maintain.

For a professional finish, first make the trunking in the cabinet to the precise measurements, fit the clips and LED strip in position, and finally fit the aluminium profile and side covers to complete the installation.

The Aquarius LED spotlight has an output of 7W, a luminous flux of 480 lumens and a cool white colour temperature of 6000K, providing bright and functional lighting for spaces such as bathrooms.

The IP44 certification ensures that the spotlight is protected against splashing water and small solid objects, making it ideal for use in wet areas such as bathrooms.

Installation is simple: the spotlight is supplied with the necessary screws to fix it to glass surfaces, table tops or furniture. Simply mark and drill the mounting points and tighten the screws to secure the spotlight in position.

The opal diffuser distributes the light evenly and eliminates reflections or glare, creating a pleasant ambience and improving the aesthetics of the lighting.

No, this LED spotlight does not need an additional converter, as it is designed to be connected directly to a 230V AC socket, simplifying installation and reducing additional costs.

The following video shows how you can easily install the aforementioned LED lighting.

The following video shows how you can easily install the aforementioned LED lighting.

The Lynx W diffuser profile is designed with precise dimensions to perfectly fit 8 mm wide LED strips, ensuring a secure installation and a movement-free fit within the Lynx W aluminium profiles.

The translucent polycarbonate material allows for an even distribution of light, eliminating visible light spots and creating homogeneous illumination. It is also strong, durable and easy to clean.

Yes, the Lynx W diffuser profile can be cut to size. For a clean and precise cut, it is recommended to use a fine-toothed saw or a specific cutting tool for polycarbonate.

This diffuser profile is ideal for applications in home furniture, offices, kitchens and bedrooms, where integrated and discreet lighting is desired. It is perfect for cabinets, shelves and under kitchen furniture.

By using the Lynx W diffuser profile, the light from the LED strips is evenly distributed, eliminating glare and improving the aesthetics of the lighting project. This results in soft and professional lighting in any space.

The following video shows how you can easily install the aforementioned LED lighting.

To install the Lynx W profile, the furniture must be machined to a width of 14 mm and a depth of 11 mm. These dimensions guarantee a perfect and secure fit of the profile.

The aluminium profile with painted or anodised finish offers high resistance to corrosion and wear. In addition, its finish enhances the aesthetics and can be combined with different styles of furniture.

Yes, the Lynx W profile can be cut to size. It is recommended to use a thin-cutting saw or aluminium specific tools to obtain a clean cut and avoid deformation.

This profile is ideal for lighting projects in kitchen furniture, wardrobes, offices and bedrooms. Its design allows discreet integration of LED strips, providing functional and decorative lighting.

The Lynx W profile is designed to be compatible with Lynx Q and Z sensors and cables, ensuring easy installation and optimal operation of the lighting system.

The Lynx W surface-mounted profile is installed using screws directly into the furniture. It is recommended to use a drill for pre-drilling and a screwdriver to tighten the screws.

The painted or anodised finish provides corrosion resistance and high quality aesthetics. This makes it ideal for projects where design and durability are important.

Yes, the profile can be cut to size. To ensure a clean cut, it is recommended to use a fine-toothed saw or a specialised aluminium tool and to protect the edges of the profile with adhesive tape during cutting.

The Lynx W profile is compatible with 8 mm wide LED strips and accessories such as Lynx Q and Z sensors and cables, ensuring simple and functional integration.

This profile is ideal for lighting projects in kitchen furniture, wardrobes, offices and bedrooms, offering a decorative and functional solution for surface lighting.

The following video shows how you can easily install the aforementioned LED lighting.

The fittings are designed as end caps for the Lynx W profile, providing a uniform finish and concealing visible connections. They also facilitate cable routing thanks to their grooved design.

These fittings are small enough to integrate perfectly with 8mm wide LED profiles and strips and are compatible with Lynx Q and Z sensors and cables.

Installation is simple: just insert the end caps into the ends of the Lynx W profile and feed the cables through the groove of the fitting. This ensures a tidy and functional electrical connection.

They are available in white, black and grey finishes, allowing them to be combined with different styles of furniture to maintain a homogeneous aesthetic.

These fixtures are ideal for home, office and bedroom furniture applications where integrated lighting and discreet, professional finishes are required.

The Lynx W accessory kit includes two side covers and mounting screws. Their main function is to provide a uniform finish to the Lynx W surface profile and to facilitate the cable routing of the LED strips.

The fixtures are designed for 8 mm wide LED strips, with a small footprint for perfect fit and easy integration into Lynx Q and Z profiles and systems.

The lower cable outlet, equipped with a groove, allows the cables to be routed neatly and safely, facilitating the electrical connection and improving the aesthetics of the project.

The accessories are available in white, black and grey finishes, offering versatility to match different furniture styles and maintain a cohesive design.

Yes, installation is simple and requires no specialised tools. The package includes the screws required to attach the covers to the Lynx W surface profile, ensuring a quick and secure installation.

The following video shows how you can easily install the aforementioned LED lighting.

The integrated front LED lighting of the Pegasus mirror has a colour temperature of 4000K, providing natural light that enhances visibility and brings out facial detail without creating distracting shadows.

The mirror has an anti-corrosion treatment and an IP44 protection rating, which makes it resistant to moisture and splash water, ideal for wet environments such as the bathroom.

The dimensions of the mirror are 600 x 700 mm, with a glass thickness of 4 mm, making it a compact and stylish solution for bathrooms of any size.

The package includes the mirror, brackets, dowels, installation hooks and detailed instructions. A drill and screwdriver are recommended for safe installation.

This mirror is perfect for residential and commercial bathrooms, thanks to its modern design, functional lighting and resistance to wet conditions, offering durability and style.

The Cassiopeia mirror's integrated anti-fogging system prevents condensation from forming on the surface, keeping it clean and functional even in bathrooms with high humidity after hot showers.

The decorative LED backlighting, with a colour temperature of 4000K, creates a warm and modern atmosphere, ideal for enhancing bathroom lighting without creating shadows and providing a sophisticated aesthetic design.

The mirror has a diameter of 60 cm and a thickness of 4 mm, making it a compact and stylish solution for bathrooms of any size, from residential to commercial.

The package includes the mirror, brackets, dowels, installation hooks and detailed instructions. A drill, levelling tool and screwdriver are recommended for installation.

This mirror is ideal for domestic bathrooms and hotels, thanks to its resistance to moisture and splashes (IP44), combined with an elegant design that adapts to modern and minimalist styles.

The following video shows how you can easily install the aforementioned LED lighting.

Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.

The Lynx W recessed profile requires 14 mm width and 11 mm depth machining in the cabinet for proper installation.

The Lynx W diffuser profile is made of polycarbonate, which homogenises the light and eliminates visible spots, ensuring uniform illumination.

This profile set is compatible with 8mm wide LED strips and is ideal for lighting projects in home furniture, offices, wardrobes and bedrooms.

The recessed profile is made of aluminium with a matt RAL 9016 finish, while the diffuser profile is made of polycarbonate, materials that offer high durability and resistance to wear and tear.

Yes, the profile can be cut to size. It is recommended to use a thin-cutting saw or a specialised aluminium tool for precise and clean cuts.

The Lynx W surface profile set is installed by screwing it directly onto the surface of the furniture. It is a simple process that requires no additional machining.

The Lynx W diffuser profile is made of polycarbonate, which allows a uniform diffusion of light, eliminating visible spots and providing homogeneous illumination.

This profile set is compatible with 8mm wide LED strips and Lynx Q and Z sensors and cables, making it ideal for multiple lighting projects.

The profiles are made of aluminium with matt finish RAL 9016 and polycarbonate, materials that guarantee high wear resistance and a long-lasting aesthetic appearance.

Yes, profiles can be cut to size. It is recommended to use tools such as thin-cutting saws or specialised tools for aluminium and polycarbonate to obtain clean and precise cuts.

To install the Lynx profile set, a 20 mm wide and 11 mm deep cut-out in the cabinet is required.

End caps for the profiles are not included in the kit and must be purchased separately.

The matt anodised finish provides a corrosion and wear resistant surface, as well as an elegant and uniform appearance.

Yes, profiles can be cut to size. It is recommended to use an aluminium thin-cutting saw or a specialised cutting tool to ensure precision and clean edges.

Once the profile has been machined, it is embedded in the furniture. It does not require additional screws for fastening, as it is secured by pressure or tightening.

The Lynx surface profile set is installed by screwing the aluminium profile directly to the surface of the furniture, which ensures simple and fast installation.

The curved diffuser profile is 17.4 mm wide and 4.4 mm high, while the aluminium profile is 18 mm wide and 10.7 mm high. Both have a length of 2.35 m.

End caps are not included in the kit and must be purchased separately if a more aesthetic finish is required.

The matt anodised finish provides increased wear resistance, corrosion resistance and a modern and elegant look that suits different furniture designs.

Yes, the profiles can be adjusted to specific dimensions by cutting them with specialised tools, such as a thin-cutting saw for aluminium or a precision hand-held cutting tool, ensuring clean, burr-free edges.

The Lynx surface inclined profile set is compatible with 8 mm wide LED strips, ideal for decorative and functional lighting systems.

The included aluminium profile has a slanted design that facilitates the orientation of the light towards the interior of the furniture or installation area, optimising the illumination.

Yes, the curved diffuser profile is designed to homogenise the light emitted by the LED strips, eliminating visible spots and achieving uniform illumination.

For installation, we recommend tools such as an electric screwdriver to screw the profile to the furniture and a thin-cutting saw to adjust the length of the profile if necessary.

No, the kit does not include screws. These must be purchased separately to complete the assembly of the profiles on the furniture surface.

The Virgo LED spotlight has a length of 300 mm, making it compatible with standard mirrors and furniture in bathrooms and other interior spaces.

IP44 protection ensures that the spotlight is resistant to moisture and splash water, making it ideal for use in bathrooms or other wet areas.

Yes, the spotlight includes all the elements necessary for installation, such as screws, multifunctional bracket and mounting instructions.

The Virgo spotlight's mounting system is compatible with glass, wood or board surfaces, allowing it to be installed on a wide variety of furniture.

Yes, the design and functionality of the Virgo spotlight also make it suitable for other environments such as kitchens or corridors, providing uniform and decorative lighting.

With this table you can calculate the total power of an LED strip.

The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.

The Rigel LED luminaire's vibration sensor is automatically activated when the drawer is opened by detecting movement, and switches off after 12 seconds without detecting additional vibrations.

The rechargeable lithium polymer battery has a capacity of 850mAh, offering an autonomy of 600 power cycles per full charge. Charging time is approximately 2 hours using a 5V DC 0.5A USB charger and the included micro USB type B cable.

The luminaire can be installed in two ways: With screws, for fixed mounting inside the drawer. With double-sided adhesive tape or adhesive magnet, allowing tool-free mounting and easy removal for recharging.

Included in the package: a rechargeable LED luminaire, screws, adhesive magnet and double-sided adhesive tape. These options ensure quick and easy mounting without the need for additional tools.

No, this luminaire is designed for dry areas and is ideal for drawer or cabinet interiors. Its IP20 rating does not make it suitable for wet or outdoor environments.

The integrated motion sensor has a detection range of 2 metres and an angle of 120°. The luminaire automatically switches off 18 seconds after motion is no longer detected.

The 850mAh lithium polymer battery fully recharges in less than 2 hours using a 5V DC 1A USB charger (not included).

No, the luminaire does not allow the light intensity to be adjusted manually, but the twilight sensor ensures that the luminaire switches on only when the ambient light is insufficient.

The wall light is compatible with adhesive metal surfaces or with screws in materials such as wood or glass. The magnetic system facilitates installation and removal.

The battery has an estimated autonomy of 400 on/off cycles per full charge, and its lifetime depends on usage and charging conditions.

The proximity touch sensor is activated when you pass your hand over a distance of 7 cm, switching the luminaire on. If you swipe your hand again, it switches off automatically.

The 850mAh rechargeable lithium polymer battery has a battery life of approximately 400 on/off cycles per full charge.

The wall light can be easily attached to metal surfaces using the included magnetic adhesive bases. It can also be installed using screws for greater stability on non-metallic materials.

Yes, the luminaire allows manual adjustment of the colour temperature between 3000K, 4000K and 6000K by pressing the dedicated button.

The applique is recharged using a 5V DC 1A USB charger (not included) and a 30cm micro USB Type C cable (included). Full charge time is less than 2 hours.

In order to choose the correct converted for an LED strip it is necessary to: - Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons. - Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation. For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip: X= (2m x 24W) / 5m = 9,6W Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.

It is compatible with Lynx 8mm wide LED strips and accessories such as Lynx Q and Z sensors and cables.

Requires machining in the cabinet with a width of 14 mm and a depth of 11 mm.

The side covers are made of white plastic, and the diffuser profile of white polycarbonate which homogenises the light. The recessed profile is made of painted or anodised aluminium, depending on the model.

No, the LED strip is not included in the set.

The bars are supplied in a length of 2.35 m, in a cardboard tube together with the side covers.

The following video shows how you can easily install the aforementioned LED lighting.

The shoe drawer is available in two heights: 482 mm (M60) and 782 mm (M90), compatible with 600 mm, 800 mm and 900 mm wide Hack modules, with a minimum depth of 450 mm.

The anchoring system is based on 6 high-strength plastic parts that secure the attachment to the frame by means of screws. This guarantees structural stability even under maximum loads.

The painted finish, either textured black or stone grey, is designed to resist abrasions and maintain its appearance under heavy use in residential and commercial applications.

It is made of powder-coated steel, which provides corrosion resistance and excellent mechanical behaviour against impact and deformation.

The modular design allows the drawer to be combined with different Hack accessories, adjusting the space configuration to optimise storage according to the size of the modules and the number of shoes.

The kit includes 2 soft closing devices, designed to dampen the movement of a sliding door, ensuring a controlled and silent closing.

The Flow inverted soft close is designed for symmetrical sliding doors, allowing installation on both top and bottom profiles, increasing its versatility compared to other systems that only work in one direction.

Yes, the system is compatible with 30 kg and 50 kg doors, ensuring optimum performance and adapting to the needs of various furniture projects.

The system does not require frequent maintenance due to its high quality materials, but it is recommended to periodically check the fastening of the screws and clean the guides to avoid dust accumulation.

No, the soft close can be installed directly on the guide profiles without the need for pre-machining, which makes it easy to install in different types of enclosures.

The brake ensures a smooth and controlled closing of the sliding doors, avoiding sudden shocks and improving the safety and durability of the system.

The brake is 68 mm long, 19 mm high and 12 mm wide, allowing for easy installation in the track without taking up much space or interfering with the operation of the doors.

No, this brake is designed specifically for the Flow system and requires Flow caps for installation, ensuring compatibility and optimum performance.

It is made of high-strength grey plastic, which makes it light but robust, ensuring a long service life and easy maintenance.

The packaging includes 40 units, making it easy to use for multiple or large installation projects.

The cover improves the aesthetic finish of the track, prevents dust accumulation and increases safety by covering the exposed ends of the Flow sliding door system.

A drill bit of 16 mm diameter and 13 mm depth is required to drill the mounting hole. Its design allows for quick assembly and disassembly by means of a snap-in anchor.

No, these covers are designed exclusively for the Flow sliding door system, guaranteeing a perfect fit and optimum functionality.

The lid has an overall size of 19 mm wide, 17 mm deep and 15 mm high. Its compact shape ensures a discreet and elegant finish.

The packaging contains 40 units, ideal for multiple installations or large projects that require a uniform finish on all rails.

The Gola top profile cover serves the purpose of sealing the side parts of the profile, providing an aesthetic and functional finish.

The cover is specifically designed to fit Gola profiles with dimensions of 54x52.6 mm.

Yes, installation is simple thanks to an anchoring system with two screws included that ensure a precise and firm fit.

It is made of high quality aluminium, which guarantees strength and durability in daily use.

This cover is available in various finishes, such as white, black, anthracite, matt anodised, gold anodised and stainless steel anodised.

The following video shows how the sliding door system for wardrobes is assembled.

Carriage sets are selected depending on the door weight.Two weight ranges, one for doors up to 40kg and one for doors from 40kg to 80kg, are available for soft-close systems.

The following video shows how the sliding door system for wardrobes is assembled.

The handle has a total length of 184 mm and an interaxis of 160 mm, adapting to different furniture sizes.

It is made of aluminium with a black painted finish, giving it a modern design and high resistance to corrosion.

Yes, it is ideal for kitchen, bathroom, home and office furniture, thanks to its strength and versatile design.

The package includes a handle and the M4 screws required for mounting, individually packaged to prevent damage.

Yes, its aluminium construction and hard-wearing finish make it ideal for furniture that is subject to intensive use.

According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.

The following video shows how you can easily assemble the profile system Gola.

The Gola system joining accessories are created using plastic (grey or white finish), and also, the accessories that are positioned on corners or corner edges require the profile to have a mitre joint.On the contrary, the straight cut accessories are created from matt silver anodized aluminium, and also, with all of them the profile only needs a straight cut, therefore preparation is easier.

The following video shows how you can easily install the Pegasus illuminating bathroom mirror.

The following video shows how you can easily install the Cassiopea backlit bathroom mirror.

The following video shows how you can easily install the Hercules mirror with built-ib lighting.

The following video shows how you can easily install the Zero system.

The mechanism raises the surface 13,5 cm from the table.

No, they do not include covers, which are sold separately. They only include the aluminium profile and the diffusor profile.

No, it is only compatible for devices that charge using the QI protocol.

The mechanism raises the table 13'5cm.

The following video shows how you can easily assemble the Simply hidden shelf bracket.

An operational E-Fan air freshener emits 28 decibels, a reduced value considering that the WHO establishes that a continuous noise level of less than 30dB is suitable for resting.

The noise levels suitable for our environment depend on our activity, considering we are continuously surrounded by noise such as vehicle traffic, industries and construction sites. Exposure to prolonged noise can affect our health causing stress, anxiety, irritability, insomnia, fatigue, headache, dizziness, hypertension, muscle tension, heart problems, hearing loss (temporary, irreversible or progressive) and tinnitus. The range of human’s ear audible sounds is from 0 to 120 decibels (dB), 75dB can be harmful, depending on intensity or exposure time. The noise levels in our environment should be as follows: - At home from 40 to 50dB. These are the typical values of a quiet room and a conversation with no environmental or background noise. - To sleep 30dB. The WHO establishes that continuous noise should not exceed 30dB as it can disturb sleep quality, and an instantaneous noise should not exceed 45dB since it can result in waking us up in the night. - At work 60dB. The usual office environment noise level is 60 dB, being 85dB the maximum allowed in Spain for an eight-hour workday, in case the intensity increases by 3dB, the noise exposure time should be halved. - In the city from 50 to 90dB. The range is 50 to 90 dB, depending on the city vehicles traffic and the instantaneous noise such as sirens and alarms.

To install the bumper it is necessary to carry out a machining of Ø5 mm and 10 mm deep, in this way the bumper is correctly embedded in the panel.

Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.

The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.

This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.

The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043. The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.

The following video shows how to assemble such a box in a simple way:

The following video shows how you can easily assemble the Concept drawer.

The following video shows how such a system is easily assembled:

Yes, although the use of two devices provides greater stability when opening. In addition, it is recommended to use two lifting systems on doors over 1 metre wide.

Yes, the drawer measurements, including its dimensions and machining, are fully compatible. The board cutting measurements, mounting dimensions and placement of the drawer in the module are exactly the same.This allows customers to mount 30 kg Concept slides and 50 kg slides on the same drawer.

The RAL code of the anthracite grey finish of the sides of the Concept kitchen, household and bathroom drawer is approximately 7043.The RAL code of the white finish of the sides of the Concept kitchen, household and bathroom drawer is approximately 9003. Although it is necessary to bear in mind that the white silk colour of said drawer is metallized and the RAL codes are for flat colours.

The board cutting dimension and the position of the hook on the front are different. However, the hole pattern of the guide rail is the same for the Concept, Vantage-Q and Slim drawers.