1 bolt

The zinc-plated trik bolt is a complementary piece for the installation of the zinc-plated closed trik coupling, this piece is designed so that its two ends generate support for the shelf. The part of the M8 lathe is embedded in the sidewall of the shelf and the other end traverses a horizontal portion of the shelf to engage the hitch. The middle part of the lathe has a diameter of 8.5mm, the end that fits into the wall of the shelf is 11mm long, and in total it is 59mm long. It is made of steel to support the weight without twisting and generate greater support, it has a zinc-plated finish. Each package contains a total of 500 units.

Additional fastening element for the installation of hooks, providing additional support on shelves and racks.

Supplementary fastening element for the installation of hooks, providing additional support on shelves and racks.

Manufacturers: Its design incorporates an M8 thread which allows a firm fixing to the side wall of the shelf, optimising structural stability.

Distributors/Wholesalers: It comes in packs of 500 units, ensuring an adequate supply for carpentry and furniture projects.

Carpenters: Its total length of 59 mm and zinc-plated finish guarantee strength and durability in load-bearing applications.

E-commerce & Retail: Ideal product for marketplaces specialised in hardware and assembly accessories, with a high demand in DIY.

The Spiral pin is designed as a key component of the closed tek coupling system. Its function is to generate support from inside the panel and to transmit the clamping force through the corresponding spiral coupling.

This bolt is manufactured from turned steel with a zinc plated finish, has a diameter of M6 and a total length of 59 mm. It is designed to provide high strength and durability for structural joints in furniture.

The M6x59 Spiral bolt is exclusively compatible with the Ø15 mm diameter Spiral coupling made of zamak. The combination ensures efficient fastening in technical furniture structures.

Assembly must be carried out by inserting the bolt into a through or press-fit hole in the board, respecting the 6 mm diameter and exposing the thread to be connected to the Spiral coupling.

Each presentation contains 500 units, which facilitates its use in production lines, contract furnishing projects or industrial facilities with a high volume of assemblies.