1 support

The bottom brackets of the Strong 3mm clamping system are made of steel and allow a maximum adjustment range of 5.5mm in depth and 6mm of height adjustment so you can properly level the drawer without problems. Its dimensions are 42 mm wide in the area of ​​attachment to the wall and 75 mm wide at the base where the furniture is positioned. Its height is 135 mm total and the depth of the base is 54 mm. Each fixing hole through which the screws are inserted has a diameter of 8 mm, its packaging is offered in 25 units and its finish is only zinc-plated.

Fixing element designed for levelling and reinforcing drawers in Strong fastening systems, providing stability in suspended modules.

Fixing element designed for levelling and reinforcing drawers in Strong fastening systems, providing stability in suspended modules.

Manufacturers: Manufactured in zinc plated steel, its maximum adjustment of 5.5 mm in depth and 6 mm in height allows precise levelling.

Distributors/Wholesalers: Available in packs of 25 units, ensuring an efficient supply for carpentry projects.

Carpenters: Installation by means of fixing holes of Ø8 mm, guaranteeing a firm hold in furniture structures.

E-commerce & Retail: Product with great acceptance in assembly and hardware marketplaces, recommended for suspended drawer systems.

The following video shows how you can easily install a Strong hanger.

The bottom Strong 32 mm bracket is designed to offer greater adjustment of the position of the unit horizontally and vertically. However, for this unit bracket, it is necessary to have the back part at a minimum distance of 32 mm in relation to the fastening wall.The bottom Strong 3 mm bracket has less adjustment and the back part has to be kept a minimum distance of 3 mm from the fastening wall.

The Strong 3 mm bottom support offers a maximum adjustment of 5.5 mm in depth and 6 mm in height, allowing the position of the suspended bottom module to be precisely adjusted for perfect levelling.

It is essential that the back of the module has a minimum clearance of 3 mm to the fixing wall. This distance ensures that the bracket can be positioned correctly without interference.

The bracket has a width of 42 mm in the fixing area, a height of 135 mm and a base of 54 mm. These dimensions ensure a firm and secure attachment to suspended lower modules, optimising the load and stability of the assembly.

The fixing hole is designed for 8 mm diameter screws, ensuring a robust attachment to the module and facilitating fast and precise mounting.

The bracket is made of steel with a zinc plated finish, making it corrosion resistant and durable in demanding environments. Supplied in batches of 25 units, suitable for industrial installations or large-scale carpentry projects.