1 nut

The M6 ​​nut joining system is a piece whose function is to serve as a support for the M6 ​​nuts, which generally have a standard measurement of minimum 5.7 mm and maximum 5.95 mm. This piece has length measurements of 10 mm x Ø 10 mm and is recessed acting as a plug or dowel. The material with which this joining system has been made is highly resistant transparent plastic. Its design has grooves on the outside for better grip. Its packaging contains 2,500 units.

Element designed to support M6 nuts in precision assemblies, ensuring stability and a firm hold.

Element designed to support M6 nuts in precision assemblies, ensuring stability and a firm hold.

Manufacturers: Manufactured from high-strength transparent plastic, its design with grooves on the outside improves grip on boards.

Distributors/Wholesalers: Available in packs of 2500 units, ensuring its commercialisation in large volumes within the assembly sector.

Carpenters: Installation by means of embedding in holes of 10 mm x 10 mm, with an adjustable depth between 5.7 and 5.95 mm.

E-commerce & Retail: Product in high demand on online hardware and fastener sales platforms, ideal for high-strength joints.

In order to know if a screw is compatible with a nut or stud bolt are compatible, we have to look at the internal thread of the screw and at the thread of the nut or stud bolt, which must coincide.For example, if we choose a nut or stud boy with a 6 metric screw thread (M6), the screw also has to have an internal metric thread of 6 (M6).

In order to know if a nut is compatible with a leveller, we have to look at the internal thread of the nut and at the thread of the leveller, which must coincide.For example, if we choose a 4 metric screw thread (M4), the nut also has to have an internal metric thread of 4 (M4).

For proper installation, this nut requires a 10 mm diameter hole. The knurled design on the outside of the nut improves the grip once it has been pressed in.

The recommended minimum depth is 5.7 mm and the maximum depth is 6.95 mm, thus allowing a correct insertion of the nut without damaging the board material.

This nut is compatible with screws, bolts or studs with metric M6 thread. Its internal thread must match the metric of the component to be fastened.

It is made of high-strength, durable technical plastic with a semi-transparent finish for discreet and secure installation.

The M6 nut connection system is available in packs of 2,500 pieces, ideal for series production or professional furniture assembly.