The slim 95mm outer drawer with soft closing has a depth of 300 mm, its bottom and back thickness is 16mm, it has horizontal front adjustment by means of a ± 1.5 mm lateral screw. It is designed to be assembled at home, it includes guides, ribs, a set of rear hooks, and a set of front hooks for the outer drawer. It also has a vertical front adjustment by eccentric ± 2 mm. It has a sheet steel rib painted in satin white epoxy (RAL 9003) and anthracite gray (RAL 7043). It perfectly cushions the closure and each package contains a unit that includes all the necessary elements for its assembly.

Yes, the bottom and the back of the Slim drawer have the same measurements for both the soft closing runners and the push runners.

The minimum unit depth required to install a Slim exterior drawer with push is calculated with the formula: Minimum depth = Depth + 3 mm. In this case the minimum unit depth needed will be 500 + 3 = 503 mm.

The minimum unit depth required to install a Slim interior drawer with push is calculated with the formula: Min. depth = Depth + 12 mm. In this case the minimum unit depth needed will be 500 + 12 = 512 mm.

It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.

It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.