2. Products
  3. Feet
  4. Levellers
  5. Adjust interior and exterior

Previous

Next

Ledown leveler for furniture, diameter 12mm, A 30mm, Steel and Plastic and Zamak, Zinc plated

2023805 / 8432393290874
APackagingFinishingSKU
24200 Unit
Zinc plated
2023805
32150 Unit
Zinc plated
2023905
52100 Unit
Zinc plated
2024005
70150 Unit
Zinc plated
3008305

Product features

  • 12 mm diameter Leveller for the sides of furniture with thicknesses from 16 mm.
  • They are very discreet in the creation of the unit and enable levelling that is safe and easy to assemble.
  • It is adjusted at the side via an Allen key no. 4.
  • Adjustment capacity of 14 mm.
  • Maximum load capacity of 250 kg.
  • Made from steel and zamak with a zinc finish.

Components

1 leveller

Ledown2 Inner circular leveller with a 12 mm diameter for furniture sides with a minimum thickness of 16 mm and that can be adjusted via the side using a no. 4 Allen key . Its main support is located on the bottom part of the piece and has an adjustment capacity of 25 mm . They are very discreet in the creation of the unit and enable levelling that is safe and easy to assemble, with a maximum load capacity of 250 kg.

Documentation

Frequently asked questions

The Ledown leveller offers an adjustment capacity of up to 25 mm by means of an Allen key no. 4. This allows it to absorb manufacturing tolerances or floor irregularities, without altering the external aesthetics of the module thanks to its completely concealed installation.

Cylindrical machining with a diameter of Ø12 mm and a depth of at least 16 mm is recommended. The body of the levelling device is pressed into the side and rests on the lower base of the side, which ensures a direct load transmission.

Adjustment is made from the underside of the furniture using a standard Allen key no. 4. This system facilitates fine adjustment once the furniture has been installed, without the need to remove plinths or front panels.

Yes, its design allows adjustment from inside the plinth by means of a through hole or side recess. It is especially useful in kitchens or bathroom furniture where total concealment and accessibility from service areas is required.

Each leveller supports up to 250 kg. It is made of steel and zinc plated zamak, which ensures mechanical strength, dimensional stability and protection against corrosion in wet or exposed environments.

Replacement

leveler M6 hexagon with nut for furniture, Steel, White Plastic product photo
leveler M6 hexagon with nut for furniture, Steel, White Plastic

Recently viewed

Ledown leveler for furniture, diameter 12mm, A 30mm, Steel and Plastic and Zamak, Zinc plated product photo
Ledown leveler for furniture, diameter 12mm, A 30mm, Steel and Plastic and Zamak, Zinc plated
Protone side height 93mm RIGHT, depth 350mm, Steel, Anthracite Grey product photo
Protone side height 93mm RIGHT, depth 350mm, Steel, Anthracite Grey
Protone side height 131mm LEFT, depth 350mm, Steel, Anthracite Grey product photo
Protone side height 131mm LEFT, depth 350mm, Steel, Anthracite Grey
X95 Hinge 45 degree, Screw-on, Steel, Nickel plated product photo
X95 Hinge 45 degree, Screw-on, Steel, Nickel plated
View All