The hidden LED Smart touch/dimmer sensor is designed for switching 12V or 24V DC LED luminaires on and off, ideal for use in headboards or areas where more precise switching is required while hiding the lens.

This sensor can be hidden behind a surface and is activated by touching that surface, as it generates a 30mm detection field and is activated by proximity. Additionally, it has a dimmer function that dims or increases the luminaire's brightness by maintaining contact with the surface where the sensor is installed. It is suitable for installation on different surfaces and thicknesses such as wood (E ≤ 30mm), plastic (E ≤ 22mm), natural stone (E ≤ 20mm), or glass (E ≤ 12mm). However, it is not suitable for use on metal surfaces or mirrors.

This sensor can be connected to a Smart converter through the control port, allowing simultaneous on and off switching of all luminaires connected to the converter with a single sensor. In this type of installation, the admissible power limit of the sensor is canceled, and the limit is set by the maximum power of the converter.

Alternatively, the sensor can be connected to the converter through the 6 ports or secondary outputs with Miniled connection, allowing independent on and off switching of the luminaires with a single converter. In this type of installation, the sensor has a maximum allowable power limit of 36W at 12V DC and 72W at 24V DC.

Made of plastic with a black finish, it includes an input and output cable, both 1.5m with Miniled connections, and all elements for installation. It also features low power consumption and protection against electrical and electromagnetic interference, ensuring stable operation.