Lynx Premium LED Strips 9.6 W/m IP20 (24V DC), length 10m, Natural White light 4,000K, Plastic

5205320 / 8432393136905
Essential products
LColour temperaturePowerPackagingFinishingSKU
10 mNatural white 4.000 K9,6 W / m1 Unit
Not defined
5205320
10 mWarm white 2.700 K9,6 W / m1 Unit
Not defined
5205420

Product features

  • Lynx Premium LED strip is suitable for long installations, as it has good efficiency and high performance.
  • Power supply: 24V DC. It requires a 24V DC LED converter for installation and a connection cable (not included in the supply).
  • Luminaire with LED technology with efficiency of 94 lm / W. Protection index IP20.
  • Natural white color temperature 4,000 Kelvin. Lighting angle: 120°.
  • It has 120 LEDs / m. Luminous flux of 910 lm / m. Power 9.6 W / m.
  • Supplied in continuous 10m rolls, with a 15cm cable welded to each end for ease of installation. It is dimmable and can be cut every 100 mm.
  • Manufactured with a double layer PCB and a 3M® 300LSE adhesive tape for fixing that provides the best adhesion.

The Lynx Premium LED strip is suitable for long installations, as it has good efficiency and high performance. It stands out for being a very efficient luminaire that works at 24V DC, so it requires a constant voltage LED converter and a power cable.

This LED strip has a high power, a degree of protection IP20 and is supplied in continuous dimmable rolls that can be cut every 3 LEDs. It is made with a double-layer PCB and a 3M® 300LSE adhesive tape for fixing that provides the best adhesion.

Components

1 LED strip

Documentation

PowerInputOutputPackagingFinishingSKU
36W/72W12/24V DC12/24V DC10 UnitNot defined5204820
PowerInputOutputPackagingFinishingSKU
36W/72W12/24V DC12/24V DC25 UnitNot defined5204920
PackagingFinishingSKU
10 KITNot defined5205020
PowerInputOutputPackagingFinishingSKU
36W/72W12/24V DC12/24V DC10 UnitNot defined5207920

FAQ


No, 24V Lynx strips are not compatible with 12V Lynx strip accessories.To make 24V Lynx strips work, it is necessary to have a 24V LED converter and SPECIAL 24v H cable including a Miniled connector, so the whole range can work with said connection.12 V Lynx sensors are not compatible either. They work at 12V, but can be used with most sensors in the Emuca catalogue admitting 24V or working at 230V AC.

Within the available sensor range, you can opt for a Red Eye or Point 240 V AC sensor or a Dot, Point, Micron or Twelfy 12V/24V sensor.In the case of 12V/24V DC sensors, bear in mind they will need a set of 12V/24V DC sensor accessories to be easily and quickly connected. They may convert their connections from AMP to Miniled.