The following video shows how you can easily assemble a lifting piston.

The following video shows how you can easily assemble the Vantage-Q drawer.

We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

The 35 mm cup is an industry standard, offering an optimal balance between stability and compatibility with different door thicknesses, guaranteeing a safe and sturdy installation.

The drilling range of 3 to 7 mm allows for flexibility in installation, adapting to different types of doors and ensuring a precise fit without compromising stability.

To ensure proper fastening, it is necessary to respect the drilling specifications of the shims, using Euro screws with a centre-to-centre distance of 32 mm and an entry depth of 12 mm.

The spring-loaded latch is designed to absorb impact and reduce wear and tear, providing smooth, controlled closing even on doors that are subject to frequent opening and closing.

In furniture with irregular finishes, the X92N hinges allow for depth, height and lateral adjustments by means of their three-dimensional adjustment, ensuring perfect closure and precise alignment.

No, this runner has different drawer mechanisms, as well as a different length.

The X92 elbow hinges are designed to fit perfectly on doors from 14 to 24 mm thick thanks to their three-dimensional adjustment system and standard 35 mm cup, ensuring an optimal and stable fit.

The clip-on mounting system allows for quick installation without additional tools, ensuring precise fastening and reducing assembly times on large volume projects.

The three-dimensional adjustment offers +/-2 mm height and side adjustments, as well as depth adjustments, allowing you to correct misalignments and ensure a perfect seal on custom-designed furniture.

The soft closing system avoids sudden impacts by cushioning the movement of the door, protecting both the hinge and the structure of the furniture, and prolonging the life of both components.

Pre-drilling should be carried out with a diameter of 35 mm, a depth of 3 to 7 mm and a centre-to-centre distance of 32 mm, which ensures a solid and precise fixing of the shims.

The 35 mm cup provides a larger contact area, increasing stability and allowing for a robust and durable installation in door thicknesses from 14 to 24 mm.

The depth adjustment by means of an eccentric screw allows precise control of the door position, correcting possible misalignments and ensuring a uniform and aesthetic closure.

The soft closing system automatically adapts to doors of different thicknesses, absorbing impacts and providing a controlled closure, ideal for intensive use in kitchen furniture and cupboards.

The clip mounting significantly reduces installation times, offering secure fixing without the need for additional tools, making it ideal for large-scale professional projects.

To install the 0-height supplements, pre-drilled holes with a diameter of 35 mm, a depth of 12 mm and a centre-to-centre spacing of 32 mm must be drilled to ensure optimum and aligned fastening.

The hinges are compatible with door thicknesses between 14 and 24 mm, ensuring correct installation on a wide variety of furniture.

The straight supplement allows a height adjustment of ±1.5 mm by means of an included eccentric screw, ensuring precise levelling after installation.

The soft closing is achieved by a damping piston integrated in the hinge, which reduces impacts and ensures controlled door movement.

The required drilling range for the cup is from D = 3 to 7 mm, ensuring correct alignment and fixing to the furniture door.

Both hinges and shims are made of nickel-plated steel, a corrosion and wear resistant material with an aesthetic finish that guarantees long life and performance.

The set includes specific screws for fixing to 35 mm cups and screws for the supplement, compatible with standard boards and ensuring a firm and precise installation.

The X91 elbow hinge allows three-dimensional height, depth and lateral adjustments thanks to its integrated eccentric adjustment and automatic clip mounting system.

These hinges have an opening angle of 105°, ideal for ensuring accessibility and functionality in kitchen, office or cupboard furniture.

The straight supplement allows ±1.5 mm height adjustment by means of an eccentric screw and has a design that remains concealed under the hinge arm once installed.

No, this batch is specifically designed for doors with a thickness of 14 to 24 mm and is not compatible with thicker thicknesses.

The drilling range required to install the hinges is 3 to 7 mm from the edge of the furniture, while the straight supplement requires standard drillings of 35 mm diameter.

The X91 super bend hinges are designed to withstand standard loads in kitchen, bathroom or wardrobe furniture, ensuring optimum performance even with heavy doors.

The perfect alignment of the door is guaranteed by the three-dimensional adjustment (height, depth and side) and the eccentric screw of the supplement.

Yes, the soft-close system is ideal for intensive use, as the damping piston reduces wear and improves the durability of the mechanism.

The straight supplement of this batch is distinguished by its compact design, which is concealed under the hinge arm, and by its full compatibility with the X91 and X92 hinges.

The kit includes synchronised full-extension slides, with cushioned closure and a load-bearing capacity of up to 40 kg.

The recommended board thickness for the bottom and back of the drawer is 18 mm.

The drawer front can be precisely adjusted by means of an eccentric of ±2 mm vertically and ±1 mm horizontally.

Yes, the metal components are made of steel with an anthracite grey painted finish, which enhances strength and aesthetics.

No, the kit includes all the necessary elements: guides, side ribs, front hooks and screws, so there is no need to purchase additional elements.

We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.

For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.

Yes, the Pyxis luminaire can be cut and connected to each LED individually, allowing it to be adjusted to the length required for the project.

Requires pre-machining to embed it into the surface of the furniture, ensuring aesthetic and functional integration.

No, the LED converter is not included in the scope of delivery, but is necessary for operation (24V DC).

The luminaire includes 1 LED luminaire, 4 mounting clips, a 1.5 m cable with Miniled connection and a cover cap.

The Miniled connection cable has a length of 1.5 metres, ideal for easy installation.

The kit includes a cable with side cover, a 1.5 metre Miniled connector, a single cover cap and 3 mounting clips.

Yes, this kit is designed to be compatible with the Pyxis luminaire by cutting and adjusting its length according to the needs of the project.

The side cover with Miniled connector allows a quick and safe connection to the 24V DC converter, facilitating the mounting and integration of the luminaire.

Yes, the kit includes mounting clips and all necessary accessories to complete the installation.

The accessories are made of durable plastic, available in black or grey finishes to match the design of the space.

This will depend on the power consumption of each connected LED luminaire, but in total should not exceed a maximum power of 200W.

Yes, this transformer is designed with an overheating, overload and short-circuit protection system to ensure safe operation.

The distributor has 6 outputs for quick and easy connection of LED luminaires via MINILED connectors.

Yes, the transformer is equipped with an interchangeable cable that allows you to connect a different type of cable depending on the plug required in the target market.

No, this transformer is designed for indoor use or dry areas (IP20). For wet areas, a transformer with a higher protection rating is required.

The central vertical curved Gola profile is designed for installation in handle-free kitchen fronts, especially in tall units and pantry cabinets. It provides convenient access and modern aesthetics by eliminating visible handles.

The profile has a standard length of 2.35 metres, although it can be cut to any desired length to suit the needs of the furniture.

The profile is made of high quality aluminium with a white painted finish, which guarantees durability and resistance to wear and tear.

Yes, the Gola profile can be cut to size using suitable tools, allowing it to be adapted to different furniture projects.

The packaging includes a central vertical curved Gola profile with protection against scratches or damage during transport.

The kit includes 8 accessories for the Gola-R top profile, designed to ensure a perfect finish at the end of the furniture assembly.

These fittings are used for the ends of profiles, ensuring a precise fit and a clean finish on kitchen furniture.

No, the fittings are designed to be press-fitted, so no screws or tools are required for installation.

They are made of high-quality, resistant plastic, ensuring durability and impeccable aesthetics.

Yes, these accessories are compatible with all available Gola-R profile finishes, including matt white, black and matt anodised.

The Optima cutlery tray finishes are of high quality, with a design that ensures strength and durability, adapting to various kitchen styles.

Yes, the Optima cutlery tray is compatible with both Vantage-Q and Slim drawer systems, provided the module and size are compatible.

Optima cutlery trays are made of high-quality, resistant plastic, guaranteeing durability and ease of cleaning.

No, Optima cutlery trays are not designed to be cut, but are available in various sizes to fit different drawer sizes.

The modular design of the Optima cutlery tray allows you to reorganise kitchen utensils efficiently, maximising the space available inside the drawer.

The following video shows how the sliding door system for wardrobes is assembled.

In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.

According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.

The following sketch shows details of the machining that should be carried out for the bracket of the Plus 7 aluminium profiles.

The following video shows how you can easily assemble the Inox plate racks.

The distance between the rods of the dish draining rack is 18 mm.Each of the rods is 7 mm wide.

The RAL code of the white finish of the Optima cutlery holder is approximately 9003. The RAL code of the grey finish of the Optima cutlery holder is approximately 7001. The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.

The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.

The following video shows how you can easily assemble the Gola profile for ovens.

The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.

The square rail section of the Slim drawer measures 23 mm by 13 mm and the section with trim measures 25 mm by 15 mm.

It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.

It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.

No, each drawer has a synchroniser accessory.

The following video shows how you can easily assemble the Vantage-Q drawer.

Yes, the bottom and the back of the Vantage-Q drawer have the same measurements for both the soft closing runners and the push runners.

The minimum unit depth required to install a Vantage-Q exterior drawer with push is calculated with the formula: Minimum depth = Depth + 38 mm. In this case the minimum unit depth needed will be 500 + 38 = 538 mm.

The minimum unit depth required to install a Vantage-Q interior drawer with push is calculated with the formula: Min. depth = Depth + 44 mm. In this case the minimum unit depth needed will be 500 + 44 = 544 mm.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

We have different heights of sides and accessories that make it possible to create different types of drawers.You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.