2. Products
  3. Sliding
  4. Placard 90
  5. Placard 90 system

Kit of Placard 90 wheel 50 fittings kit for one sliding door, 70kg, Channel, With brakes, Steel and Plastic

6104520 / 8432393114835
Essential products
Kit of Placard 90 wheel 50 fittings kit for one sliding door, 70kg, Channel, With brakes, Steel and Plastic-Primary
Kit of Placard 90 wheel 50 fittings kit for one sliding door, 70kg, Channel, With brakes, Steel and Plastic-Primary
Board thicknessPackagingFinishingSKU
19 mm4 KIT
Not defined
6104520

Product features

  • The packaging of this article corresponds to 4 sets of wheels for the assembly of 4 doors.

These fittings are complementary parts for the installation of sliding doors. This set of pieces creates a system for the sliding of the wardrobe. This kit has three types of parts in total: 2 channel trucks, 2 channel skates, and Two brakes. It comes with its corresponding screws. This conjunction of parts supports a weight of up to 70 kg and is designed for 19 mm boards. The closure is at normal speed, but it cushions the impact. The pieces are manufactured with steel and plastic, so they have a high duration and resistance. Each packaging contains a totality of 4 units.

Components

1 pair of trolleys, 1 set of brakes

Documentation

Handle for wardrobe Hill 19 handle Handle for wardrobe Hill 19 handle product photo
LongitudePackagingFinishingSKU
2,7 m8 UnitMatt anodized6016762
Handle for wardrobe Vall 19 handle Handle for wardrobe Vall 19 handle product photo
LongitudePackagingFinishingSKU
2,35 m8 UnitMatt anodized6307662
2,7 m8 UnitMatt anodized6016662
Upper track for Slowmove Upper track for Slowmove product photo
LongitudePackagingFinishingSKU
2,35 m8 UnitMatt anodized6306262
3,9 m8 UnitMatt anodized6032262
Placard lower track of Groove for sliding door Placard lower track of Groove for sliding door product photo
LongitudePackagingFinishingSKU
2,35 m8 UnitMatt anodized6304062
3,9 m8 UnitMatt anodized6032062
Profile cover Placard of Groove for sliding door Profile cover Placard of Groove for sliding door product photo
LongitudePackagingFinishingSKU
2,35 m16 UnitMatt anodized6104262
3,9 m16 UnitMatt anodized6907962
Handle for wardrobe Line 19 handle Handle for wardrobe Line 19 handle product photo
LongitudePackagingFinishingSKU
2,35 m8 UnitMatt anodized6306562
2,7 m8 UnitMatt anodized6016862
Crossbeams Placard U19x14 Crossbeams Placard U19x14 product photo
LongitudePackagingFinishingSKU
2,35 m8 UnitWhite painted6103112
2,35 m8 UnitBlack painted6103114
4 m8 UnitAnthracite grey6056535
2,35 m8 UnitMatt anodized6103162

FAQ

The following video shows how the sliding door system for wardrobes is assembled.

The following video shows how the sliding door system for wardrobes is assembled.

Yes, it is possible to put a brake on the central door of a 3 door Placard wardrobe. However, it is necessary to take into account the opening of the central door in order to put the brake in, as it is only possible to have the brake in one direction. In the following diagram you can see the position of the brakes on the rail depending on the opening direction of the sliding doors.

Recently viewed

Kit of Placard 90 wheel 50 fittings kit for one sliding door, 70kg, Channel, With brakes, Steel and Plastic product photo
Kit of Placard 90 wheel 50 fittings kit for one sliding door, 70kg, Channel, With brakes, Steel and Plastic
View All