Slowmove door fittings come in a combo to install sliding smooth doors. It should only be used with 19 mm boards. It has an anti-derailment system using a spring in the lower car, with an anti-jump adjustable stop on the upper skate. It has an exceeding upper brake that allows opening in either of the two senses. It works for 2 and 3 doors. The lower carriage is adjustable in height more or less than 7.5 mm. It has ball cushion bearings. The pieces of this combo are plastic. Resist a weight of up to 30kg. Each packaging contains a totality of 2 units.

The following video shows how the sliding door system for wardrobes is assembled.

The following video shows how the sliding door system for wardrobes is assembled.

The Slowmove soft closing system for Placard can be assembled on 2-door and 3-door wardrobes: For 2-door wardrobes you can install Slowmove soft closing on the opening as well as the closing of all the doors. However, on 3-door wardrobes you can install Slowmove soft closing only on the outer door for opening. For closing, it can be installed on all of the doors (inside and outside) depending on the closing movement.

We can put a smooth closing device on the opening and a code 6102021 brake on the door closure. This will make sure the central door is not loose when closed or open.

The minimum recommended width that a door should have in order to mount soft Slowmove closing for Placard is 650 mm.