Yes, the hinges and accessories come with Ø4x16 mm screws with the same titanium finish.

The eccentric adjustment allows a ±2 mm adjustment, ensuring fine control of door alignment, which is essential for high precision and technical design projects.

Drilling must be carried out with a 32 mm spacing between screws and a distance of 37 mm from the inner edge of the door, ensuring a solid and stable anchorage for the supplement.

The 0-height adjustment facilitates the exact alignment of doors on standard furniture, eliminating the need for additional modifications and ensuring fast and accurate installation.

The nickel or titanium finish provides superior corrosion resistance, which protects the supplement against external agents, as well as improving its durability in continuous use environments such as kitchens and offices.

This supplement is ideal for kitchen and office furniture, as it allows precise adjustment of the doors, maintaining their stability even in applications where frequent and constant use is required.

The X91 super elbow hinges are designed for full overlay doors, offering maximum coverage of the cabinet side and compatibility with three-dimensional adjustment systems.

The 105° opening angle allows wide and convenient access, ideal for corner or angled furniture that requires unrestricted movement.

Pre-drilling should include boreholes with a diameter of 35 mm and a depth range of 3 to 7 mm, ensuring a firm fixing and perfect alignment for stable mounting.

The eccentric adjustment facilitates fine adjustment in depth, making it possible to correct misalignments in door thicknesses from 14 to 24 mm, which is crucial for customised projects.

The clip-on mounting system speeds up the installation process by eliminating the need for additional tools, providing fast and secure attachment in high demand installations.

Maintenance required: These slides require minimal maintenance. It is recommended to clean the tracks regularly with a dry cloth to avoid dust accumulation and to apply a specific hardware lubricant if any sliding resistance is felt.

Compatibility with customised designs: The slides are compatible with customised drawers as long as they comply with the technical specifications, such as a depth of 290 mm, a maximum weight of 25 kg and internal dimensions in accordance with the slide fixing system.

Locking pivot stability: The locking pivot ensures that the drawer remains completely fixed and level even when fully open, providing a safe user experience and preventing unwanted movement.

Compatibility with additional locking systems: These slides already have an integrated soft closing system, but can be supplemented with other automation systems if they are compatible with standard full extension slides.

Durability Guarantee: These slides are manufactured from high quality steel and finished in chrome, offering corrosion resistance and a guarantee of optimum performance even after years of frequent use. Specific warranty may vary by distributor.

The Crux Ring has an outer diameter of 65 mm and an inner diameter of 59.4 mm, making it compatible with Crux and Crux-in lamps. It is designed for a perfect fit with these LED spotlight models.

It is made entirely of plastic with a polished metallic grey aluminium painted finish. This finish combines durability with an aesthetic design that simulates satin aluminium, providing a modern and elegant appearance.

Installation of the Crux Ring is simple, thanks to the two screw holes at opposite ends, 45 mm apart. This allows for a secure and stable fixing.

Its rounded and polished design makes it easy to integrate into lighting projects, providing a professional and aesthetically pleasing finish to the mounting of LED spotlights. In addition, its lightweight construction simplifies handling and installation.

The package includes 6 units ready to install with Crux lamps. Each ring is precision-engineered to fit perfectly and comes in practical packaging for easy transport and storage.

The Crux-in LED spotlight runs directly on AC 230V 50Hz, eliminating the need for a converter. This simplifies installation and makes it more efficient for furniture and interior spaces.

Its dimensions are 65 mm in diameter at the base, with a thickness of 11.5 mm and a 1.4 mm flange for discreet recessing. Its compact design ensures a stable installation and a professional finish.

The spotlight emits a cool white light of 6000K with a power of 1.8W and a luminous flux of 116 lm, providing a bright and suitable illumination for functional spaces such as kitchens, cupboards and offices.

The package includes 1 LED luminaire, installation screws and bracket. It is recommended to have a drill and screwdriver to fix the spotlight securely to the furniture.

This spotlight is ideal for applications in kitchen cabinets, cupboards, display cabinets and shelves, where functional lighting is needed. Its minimalist design and resistance (IP20) make it perfect for dry and protected interiors.

No, the Gemini LED spotlight does not require a transformer, as it is powered directly by 230V AC.

This LED spotlight features IP44 protection, making it resistant to moisture and splash water, ideal for bathroom environments.

Yes, the Gemini spotlight is designed to be mounted on both furniture and glass surfaces, using the elements included in the mounting kit.

The kit includes the luminaire, an IP44 junction box, screws and accessories required for installation on different surfaces.

Yes, the opal diffuser homogenises the light emitted, eliminating bright spots and providing uniform and pleasant illumination.

The Aries LED spotlight has dimensions of 300 mm in length, making it ideal for medium to large surfaces, fitting standard bathroom furniture and mirrors.

No, the Aries LED spotlight does not require an additional converter, as it operates directly on 230V AC power, simplifying installation.

The integrated opal diffuser homogenises the light, eliminating glare and shadows, ensuring uniform and pleasant illumination.

Mounting is by means of a multi-functional attachment which allows the spotlight to be fixed to glass, wood or boards using the included screws and IP44 connection box.

Yes, although the Aries spotlight is designed to be durable, it is possible to purchase compatible accessories and components in case of damage or wear and tear.

The Centaurus mirror features 4,000K decorative LED backlighting, which provides a uniform, shadow-free, natural white light, ideal for improving visibility in the bathroom or any space in the home.

Yes, the Centaurus mirror is designed for wet environments, as it has an IP44 rating, making it resistant to moisture and splashing water.

The dimensions of the mirror are 800 x 600 mm, with a glass thickness of 4 mm. In addition, a 1 metre long power cable is included.

Yes, the design of the mirror allows it to be installed both vertically and horizontally, adapting to different space and style configurations.

Package includes: 1 Centaurus mirror Mounting brackets and plugs Installation hooks Detailed installation instructions. This facilitates quick and safe installation.

The Zeus mirror features decorative LED backlighting that projects a natural white 4,000K light, providing uniform, shadow-free illumination, ideal for bathrooms or decorative spaces.

Yes, the Zeus mirror is designed for wet environments thanks to its IP44 protection rating, which makes it resistant to moisture and splashing water.

The mirror has a diameter of 800 mm, a glass thickness of 4 mm and a 1 metre long power cable.

The decorative frame of the mirror is made of aluminium, with a black lacquered finish, giving it an elegant and modern design.

Package includes: 1 Zeus mirror Mounting brackets and plugs Installation hooks Detailed installation instructions. This ensures quick and easy installation.

Yes, the Heracles mirror is designed to be installed in both vertical and horizontal orientation, adapting to different bathroom configurations.

The mirror is 5 mm thick, which guarantees high resistance and durability against possible impacts.

Yes, the integrated touch switch includes an anti-fogging function, which prevents condensation from building up on the front surface of the mirror.

The mirror has an IP44 protection rating, which makes it resistant to moisture and splash water, ideal for wet environments such as bathrooms.

The package includes 1 mirror, brackets, dowels, installation hooks and instruction manual.

The SMART 6W LED Converter is designed for energy efficiency and high power factor. It operates with an input of 220-240V AC (50-60Hz) and generates an output of 12V DC, ideal for LED luminaires. In addition, it has a compact design with a reduced thickness of only 16.5mm.

This converter includes protection against overloads, short circuits and electromagnetic interference, ensuring stable, safe and compliant operation in accordance with European standards.

It has 6 Miniled outlets compatible with IEC 60320 C7 connection, allowing efficient and safe connection for multiple luminaires.

Yes, thanks to its compact and slim design, it is ideal for installation in back or hard-to-reach areas, such as under furniture or in concealed spaces.

Yes, this converter complies with European safety standards, ensuring protection against electrical interference and offering reliable operation for domestic or professional use.

The 15W SMART LED Converter has an input of 220-240V AC (50-60Hz) and output of 24V DC, which makes it ideal for LED luminaires with lower power requirements. In addition, its compact design with 16.5mm thickness sets it apart as it is suitable for narrow installation areas.

It has 6 Miniled outlets, designed to facilitate the efficient connection of multiple LED luminaires. Each output uses IEC 60320 C7 connectors, allowing a stable and secure connection.

Its Plug&Play design and its compatibility with centralised SMART sensors allow multiple luminaires to be easily connected and controlled. It is also ideal for both domestic and professional applications, adapting to different lighting configurations.

It integrates protection against overloads, overheating and short circuits in the secondary, complying with European safety standards to guarantee stable and safe operation in all its applications.

The power cable has a length of 2 metres, is equipped with a 90° angled Type C plug and an IEC 60320 C7 connector. This configuration optimises space and facilitates installation, even in hard-to-reach areas.

The RF Emitter works as a wireless switch, sending a radio frequency signal to the Smart RF receiver (not included). It allows the luminaire to be switched on, off or dimmed by a sensor that detects the movement of the hand, without direct contact.

The sensor has a detection range of 3 cm, allowing the luminaire to be controlled without touching the device, offering convenience and practicality in use.

Yes, it is possible to pair up to 6 receivers with one RF emitter or link up to 6 emitters to the same receiver. This makes it possible to manage several luminaires from a single emitter or different emitters depending on the needs of the space.

The RF Emitter uses a CR2450 battery, which provides a battery life of approximately 550 on/off cycles or up to 14 months in standby mode.

Installation is simple and can be done using double-sided adhesive or screws, both of which are included in the package. This makes it easy to attach to furniture, walls or other surfaces.

The RF emitter with Smart motion sensor detects the presence of a human body within its detection range. When activated, it switches the luminaire on and automatically switches it off after 30 seconds if no further motion is detected.

The sensor has a detection range of 90° and a length of 2.5 metres, allowing it to detect movement over a wide area. It keeps the luminaire active as long as it detects presence in its range.

It is possible to pair a transmitter with up to 6 receivers, and a receiver can be connected to up to 6 transmitters. This makes it possible to manage several luminaires in a flexible and practical way.

It is powered by a CR2450 battery, which provides up to 600 on/off cycles or 16 months standby time. The battery can be easily replaced when needed.

It is installed with double-sided adhesive or screws, both included. It is ideal for spaces such as corridors, staircases, dressing rooms and wardrobes, where automatic switching is particularly useful and efficient.

The sensor detects when a door is opened or closed within a range of 6 cm, automatically switching the luminaire on or off. It works wirelessly by sending radio frequency signals to the Smart RF receiver.

The detection range is 6 cm, allowing installation on furniture with single or double doors. The sensor lens is positioned so that each side detects the movement of a specific door.

Up to 6 receivers can be linked with one emitter and 6 emitters with one receiver, providing flexibility to manage multiple luminaires.

It uses a CR2450 battery, which lasts approximately 12 months in standby mode or 500 on/off cycles. The battery is easily replaceable.

It is installed with double-sided adhesive or screws, both included in the kit. Installation is simple and suitable for everyday cabinets or similar spaces.

The RF receiver receives radio frequency signals emitted by the RF Smart emitters, controlling 12V DC or 24V DC LED luminaires. It has a maximum range of 5 metres.

It is possible to link 1 transmitter with up to 6 receivers and 1 receiver with up to 6 transmitters, providing flexibility in multiple installations.

To pair, simply press the pairing button on the receiver and then on the transmitter for 10 seconds. The same process is used to unpair.

It can be installed concealed in different environments such as dressing rooms, kitchens, bedrooms or living rooms. It is versatile and discreet, suitable for various types of projects.

The kit includes 1 receiver and a double-sided adhesive for quick and secure installation.

The sensor detects motion within a range of 90° and up to 2.5 metres. The timer switches the luminaires off after 60 seconds without motion detection and restarts when motion is detected again.

This sensor can be connected to a Smart converter to manage several luminaires simultaneously with a single sensor. It is compatible with 12V DC or 24V DC luminaires, supporting a maximum power of 36W for 12V DC and 72W for 24V DC.

The sensor requires machining with a diameter of 12 mm to be integrated into the furniture. It is fixed by means of a mounting accessory and screws included.

It includes a 1.5 m cable with Miniled connection and an additional 1 m for the lens. This facilitates integration into Miniled systems for quick and easy installation.

Ideal for passageways, dressing rooms, wardrobes, hallways and stairwells in homes or commercial facilities, providing comfort and energy efficiency through automatic switching on and off.

The sensor has a detection range of 10 cm and is activated when the furniture doors are opened or closed. It is ideal for furniture with double doors, as it is installed in the centre and controls the lighting regardless of which of the doors is opened or closed.

It is compatible with 12V DC or 24V DC converters, supporting power ratings of 36W at 12V DC and 72W at 24V DC. It integrates with LED luminaires from Miniled systems.

No machining required. Can be mounted directly onto the surface of the furniture using the included double-sided adhesive accessory or screwed for a more permanent fixing.

It can be connected to a converter to manage up to 6 secondary luminaires with Miniled connection from a single sensor.

This sensor is ideal for wardrobes, dressing rooms and other furniture that require automatic switching on and off when opening or closing their doors, offering convenience and energy efficiency.

The sensor is activated by passing your hand in front of it, within a detection range of 6 cm. It allows the luminaire to be switched on and off, as well as adjusting the light intensity (dimmer mode) by a prolonged action.

This sensor supports up to 36W in 12V DC systems and 72W in 24V DC systems, making it ideal for a wide variety of applications with LED luminaires.

Yes, it is possible. Connected to a Smart converter, it can manage up to 6 secondary luminaires with Miniled connection, allowing all of them to be switched on and off at the same time.

No complex machining is required. Its compact design allows it to be recessed in the furniture, occupying a diameter of only 8 mm.

It is ideal for furniture in kitchens, wardrobes, dressing rooms and areas where simple LED lighting control with intensity adjustment is desired, offering convenience and energy efficiency.

The app allows you to switch on, switch off, adjust the intensity (dimmer) and create customised scenes for different times of the day or home environments. In addition, voice commands can be sent.

This receiver can control up to 5 LED luminaires connected via the Miniled connectors, ensuring simultaneous control.

Yes, the receiver is compatible with Google Assistant and Alexa, allowing full control of the lights via voice commands.

It can be paired with up to 6 RF transmitters. The process is simple: press the pairing button on the receiver and the transmitter for 10 seconds. To unpair, repeat the procedure.

It is easily installed on the converter output with Miniled connections. Its compact design allows for concealed location with a maximum range of 5 metres from the RF transmitter.

Combines the functionality of a hand switch and a proximity sensor for doors. This allows luminaires to be controlled by waving a hand in front of the sensor or by opening/closing a door, depending on the required configuration.

It has a detection range of 10 cm. It is triggered automatically when it detects the user's hand or when it interferes with the sensor field when a door is opened or closed.

Yes, the sensor can be connected to a Smart converter to control the simultaneous switching on and off of all connected luminaires. In this type of installation, the sensor manages a maximum power limit of 36W at 12V DC and 72W at 24V DC.

It can manage up to 6 ports or secondary outputs via Miniled connections, allowing independent on/off switching of several luminaires with a single converter.

The sensor can be surface mounted using a double-sided adhesive accessory or recessed into furniture thanks to its compact design. It includes a 1.5 m cable with Miniled connections and components for easy installation.

The Taurus LED spotlight offers a cool white light of 6,000K (also available in 5,700K) and has an opal diffuser that homogenises the light to avoid reflections and shadows.

No, this spotlight does not require a transformer, as it operates directly on 230V AC.

It can be easily installed on glass mirrors, on table tops or on the surface of furniture using the included screws and instructions.

The spotlight has an IP44 protection rating, making it ideal for wet areas and splash resistant.

Includes LED luminaire, screws and instructions for easy and safe mounting.

It is compatible with Lynx 8mm wide LED strips and accessories such as Lynx Q and Z sensors and cables.

Requires machining in the cabinet with a width of 14 mm and a depth of 11 mm.

The side covers are made of white plastic, and the diffuser profile of white polycarbonate which homogenises the light. The recessed profile is made of painted or anodised aluminium, depending on the model.

No, the LED strip is not included in the set.

The bars are supplied in a length of 2.35 m, in a cardboard tube together with the side covers.

Yes, the aluminium profile as well as the diffuser profile and side covers can be cut to the desired length using suitable tools, such as a hand saw or an aluminium cutter. This allows the system to be adapted to any length required for the installation.

It does not affect the intensity significantly, but it does improve light distribution by avoiding bright spots, providing a more uniform and pleasant illumination.

To install the profile, a screwdriver is required to fix the included screws, as well as a saw to cut the profile to size if necessary. A suitable drill bit is also recommended in case it is necessary to drill holes for cable routing.

Yes, the profile design includes enough space to accommodate the connection cables to keep the installation tidy and unobtrusive, ideal for furniture and visible surfaces.

Yes, the profile is made of aluminium and plastic, which makes it resistant to high humidity environments. However, it is recommended to use LED strips with adequate protection (such as IP65 or higher) to ensure the durability of the system in wet areas.

The sensor has a detection range of 1.5 metres in length with a coverage angle of 90°.

No, the timer automatically switches off the luminaire 45 seconds after no motion is detected and is not adjustable.

The sensor can be installed in Ø16 mm machining or screwed directly to the surface of the furniture using the included screws and accessories.

Yes, the sensor is compatible and works correctly with 12V DC and 24V DC LED converters, supporting up to a maximum power of 250W.

Yes, the sensor employs PIR technology, which provides high sensitivity and accuracy in detecting movement of a human body.

It is suitable for high demand lighting applications requiring up to 7A of current, such as in dressing rooms, kitchens and commercial or residential environments.

It offers a VH-2Y connection at the main end, designed to connect to the high power outputs of the Smart converters (60W, 80W, 90W and 100W).

The terminal block allows quick, manual connection without the need for additional connectors, optimising current flow and improving efficiency.

The cable supports a maximum current of 7A, ideal for 84W to 168W systems with voltages of 12V DC and 24V DC.

It is compatible with Smart converters and 12V DC and 24V DC LED luminaires, used in various spaces such as dressing rooms, living rooms and kitchens.

Suitable for surfaces such as wood (≤30 mm), plastic (≤22 mm), natural stone (≤20 mm) and glass (≤12 mm). Not compatible with metal surfaces or mirrors.

It has a detection field of 30 mm and is activated by touching the installed surface, generating a tactile contact that controls the illumination.

No, the sensor is not suitable for metal surfaces and mirrors due to interference with touch detection.

It is compatible with 12V and 24V DC LED luminaires and Smart converters, including up to 6 ports or secondary outputs with Miniled connection.

The dimmer function allows the light intensity to be adjusted by a long zoom, giving full control over the brightness.

The sensor is activated by touch, switching the luminaire on or off. In addition, the light intensity can be adjusted with its dimmer function by maintaining contact with the sensor.

Yes, the sensor has two lenses that function as independent switches, allowing luminaires to be controlled from either lens indistinctly.

It is compatible with 12V or 24V DC LED luminaires and Smart converters. It also supports up to 6 secondary outputs with Miniled connection.

It is ideal for bed headboards or areas where convenient tactile control is required, such as built-in furniture or areas with direct access to the lens.

Includes a 1.5 m cable with Miniled connections and an additional 1 m cable for the lens. Installation is easy thanks to its compact dimensions and recessed design in 8 mm diameter furniture.

The SIMPLE model has a single touch lens for switching on/off and adjusting the intensity of the luminaire. The DOUBLE model includes two independent lenses for greater control.

The sensor has a diameter of 8 mm for embedding in furniture. A 1.5 m cable is included and requires a compact installation space.

Supports up to 36W for 12V DC luminaires and up to 72W for 24V DC luminaires, depending on the Smart converter used.

Yes, the sensor can be connected to a single Smart converter, allowing all luminaires connected to the converter to be controlled simultaneously.

The kit includes the sensor with a 1.5 m cable with Miniled connection and an additional 1 m for the lens, plus components required for quick and safe installation.

The sensor allows the luminaire to be switched on, off and dimmed by means of two independent lenses. It also has a dimmer function for precise brightness adjustment.

The DOUBLE model includes two lenses that operate independently, allowing different luminaires or zones to be controlled from each lens. The SIMPLE model has only one lens for similar functions.

Supports up to 36W for 12V DC luminaires and up to 72W for 24V DC luminaires, always connected to a compatible Smart converter.

The sensor must be recessed in a piece of furniture with a diameter of 8 mm. It is connected to the Smart converter via Miniled cables and has a compact and simple mounting.

The kit includes the sensor with two 1.5 m cables and an additional 1 m for each lens, Miniled connections and all necessary components for installation.

The sensor has a detection range of 6 cm, which allows it to be activated precisely when a hand is swiped or a door is opened, depending on the configuration.

Yes, the sensor is fully compatible with 12V DC and 24V DC LED systems, supporting maximum power ratings of 36W at 12V DC and 72W at 24V DC.

The sensor has a small sensor head (8 mm diameter) that can be easily embedded in the furniture by drilling a hole. It also includes all the necessary accessories for fixing.

Yes, it can be connected to a Smart converter with control port, allowing simultaneous switching on and off of all connected luminaires. In addition, it supports connection to the 6 Miniled ports of the converter for independent control of the luminaires.

The sensor is made of plastic with a black finish, providing durability and resistance. It also features low power consumption and protection against electrical and electromagnetic interference.

The sensor has a detection range of 6 cm, designed to be activated when the cabinet door is opened or closed.

Yes, the sensor is ideal for wardrobes with double hinged doors, as it can be installed in a single opening. It detects movement of either door, switching the luminaire on or off independently.

The sensor supports up to 36W with 12V DC LED systems and up to 72W with 24V DC systems.

The sensor has compact heads with a diameter of 8 mm which are recessed into the cabinet by drilling holes. It includes a 1.5 m cable with Miniled connections and an additional 1 m for easy installation.

Yes, the sensor is connected to a Smart converter with control port, allowing simultaneous switching on and off of all connected luminaires.

The touch sensor acts as a switch that turns the luminaire on or off when touched by hand. In addition, it has a dimmer function that allows the intensity of the light to be adjusted by a short or long zoom.

The RF transmitter has a range of up to 5 metres, allowing it to be installed in hidden or hard-to-reach locations.

Up to 6 RF receivers can be linked per transmitter, facilitating the control of multiple luminaires simultaneously.

The transmitter uses a CR2450 battery which has a battery life of approximately 700 power-on cycles and up to 18 months in standby mode. It is recommended to replace the battery when it runs out of power.

Yes, the emitter is compatible with Smart converters and 12V DC or 24V DC LED luminaires, and is ideal for applications in kitchens, wardrobes or bedrooms.

The main difference is the position they are fitted in during installation.The 12V sensors (Twelfy) are placed between the light and the converter. Consequently, the converter is always working.The 240V sensors (Red eye) are placed between the converter and the electric socket.The big advantage of a 12 V sensor (Twelfy) is that is makes it possible to connect with a single converter (maximum admissible power 40W), on the other hand the 240V sensors (Red eye) need two converters.

The Red Eye sensors that functions at 240V AC are different in accordance with their functionality and your needs."I need a sensor that turns on and off the light like a switch but without physically touching the furniture". SWITCH. Red Eye 1 (switch) Code. 7001520. An ON/OFF proximity detection system that turns on or off when its detection range of 5 cm is triggered."I need a sensor that turns on lights when it detects the movement of a human body and turns off automatically after a while, providing that it does not detect the movement of a human body, ideal for walk-in wardrobes". MOTION. Red Eye 4 (movement) Code. 7001820. A movement detection system, it turns on when the detection range of 2.5 m IS triggered and the switching off can be adjusted between 10 seconds and 3 minutes."I need a sensor that turns on the light through contact with a metallic surface, ideal for bed headboards". METAL. Red Eye 5 (touch) Code. 7001920. Detection system through contact with a metal surface. Adjustable detection ranges and/or functioning according to needs.

Yes, its design allows for easy installation using basic tools such as a cut-to-length saw, a drill and a screwdriver.

No, the handle does not include screws. It is recommended to use screws suitable for the thickness of the board (18 mm) and the material of the cabinet for a secure fixing.

The handle does not require special maintenance. It is recommended to clean it periodically with a damp cloth and avoid using abrasive products that may damage the anodised finish.

Yes, although it is specifically designed for the Placard 61 system, it can be adapted to other systems as long as the board dimensions and profiles are compatible.

The handle has a length of 2.8 m. It can be cut to the required length using tools such as a saw to adapt it to the specific cabinet design.

Compatible thicknesses are 16, 18 and 19 mm, ensuring a perfect fit between profiles, rails and boards.

The anti-derailment system consists of an integrated spring in the bottom carriage and an adjustable anti-jump stop in the top runner. It is installed at both ends of the system to ensure that the doors do not slip out of the track during use.

The adjustment system allows the height to be adjusted by up to ±5 mm to level the doors after installation. This is done by adjusting the screws located on the lower carriages.

The soft closing device includes a hydraulic piston and a progressive braking system. It is designed to withstand up to 30 kg per door and ensures safe and quiet closing.

Yes, both profiles and rails are supplied in 2.35 m dimensions and can be cut to size according to the dimensions of the furniture using suitable cutting tools.

Follow this diagram:

Follow this diagram:

The Portland furniture knob is made of Zamak, a robust and durable material that guarantees a long service life.

The Portland knob has a diameter of 24 mm, making it ideal for a wide variety of furniture.

The packaging includes a knob and an M4 screw for quick and easy installation.

Yes, the chrome finish is resistant to everyday wear and tear, maintaining its shine and elegant appearance over time.

The Portland knob is suitable for kitchen, bathroom, home and office furniture, offering versatility and modern design.

The Sedaví handle is made of zamak with an aluminium painted finish, offering strength, durability and a modern design.

The handle has a length of 137 mm and an interaxis of 128 mm, which makes it suitable for various types of furniture.

Yes, the Sedaví handle is ideal for kitchen, bathroom, office and other spaces, thanks to its functional and aesthetic design.

Yes, it includes the necessary M4 screws to facilitate immediate installation.

The handle can be installed in either horizontal or vertical orientation, adapting to the requirements of the furniture.

The upper reinforced runner acts as a thread for the runners on the Space+ sliding door system. This profile offers greater resistance to torsion than the runner that is not reinforced, therefore it is ideal for large wardrobes with heavy doors that weigh up to 85 kg each.

Benetússer knobs are made of zamak, a resistant material that combines durability and elegant design.

Available finishes include satin nickel and mocha, ideal for matching different styles of furniture.

Each knob has a diameter of 41 mm, which makes them suitable for small and decorative furniture.

The knobs are easily installed using the screws provided. They can be recessed or surface-mounted according to the desired design.

This set of knobs is perfect for kitchen, bathroom, home and office furniture, such as drawers and cabinet doors.

The following video shows how the sliding door system for wardrobes is assembled.

These covers allow the ends of the Railway system profile to be closed off, improving the visual finish, preventing the ingress of dirt and protecting the sliding system.

They bolt directly to the top rail mechanism of the Railway system, and are complemented by the front cover of the same system for total aesthetic integration.

Each side cover is 53 mm wide, 89.6 mm high and 5 mm thick, compatible with the standard Railway system.

They are made of high-strength grey technical plastic, which guarantees durability, dust resistance and ease of assembly.

Yes, they incorporate a small internal fold that favours the precise coupling with the front cover, avoiding displacements or vibrations.

The front cover enhances the final aesthetic finish of the wall mounted sliding door system by concealing the guides and protecting the mechanism from dust and dirt.

It has a length of 2 m, a height of 89 mm and a thickness of 14 mm. It is compatible exclusively with the Railway wall mounting system.

It is fixed by means of a snap-in system, without the need for additional fittings, which makes it easy to install in wall installations.

It is made of matt anodised aluminium, which guarantees high resistance to corrosion and a homogeneous aesthetics with the rest of the system.

Yes, aluminium allows clean and precise cutting with standard tools, making it easy to adapt to multiple width configurations.

Its compact design hides the soft close inside the rail, offering a damping system without visual impact. This makes it an ideal solution for spaces where clean, minimalist design is key, without sacrificing the functionality of assisted closing.

The doors must be machined at the top edges to accommodate the carriage and the embedded damping system. No visible front perforations are required, which improves the aesthetics of the assembly and speeds up the series production process.

It is essential to reinforce the false ceiling structure with a wooden or metal substructure to support the load of the track and door. The system must be fixed to continuous structural elements, not directly to the plasterboard, to ensure safe and stable operation.

The soft close is optimised for doors up to 40 kg and minimum door thicknesses of 35 mm. Using lighter or thinner doors may decrease the braking efficiency, while heavier doors require the top version of the kit or an additional reinforced latch.

Yes, the system allows integration with automation solutions using magnetic or presence sensors, as its mechanical operation is silent and does not interfere with electronic devices. It is ideal for smart architecture or advanced retail projects.

The system includes a brake with progressive damping that acts on the last centimetres of the stroke, allowing a smooth closing, without bumps or recoil. This feature enhances the user experience and protects the structure of the furniture in the long term.

The brake has been tested to exceed more than 50,000 opening and closing cycles without loss of performance. This makes it suitable for frequently used installations such as kitchen cabinets, offices or partitions in residential and commercial spaces.

The system is designed to be integrated into new installations, but can be adapted to existing installations as long as the track is compatible. Its modular design allows the door to be disassembled and the brake incorporated without replacing the rest of the hardware.

No, the Railway Retrac brake is factory calibrated to activate in the last 80 mm of travel. Its behaviour is constant, which guarantees reliability in multiple installations or in series production without the need for adjustments per door.

In cases where a thinner door is required, it is recommended that an additional rail or profile be added to ensure the correct fit of the trolley and brake. This maintains stability and allows the functionality of the Railway Retrac system to be retained without modifying the hardware.

The flush mounting allows the profile and the hardware system to be completely hidden, achieving a clean and continuous aesthetic finish. It is ideal for high-end architectural projects, hotels or premium homes where design without visible elements is a priority.

It is recommended to leave a slot with a tolerance of ±1 mm to the outer width of the track to allow for insertion and removal if necessary. The alignment must be perfect, as any deviation may affect the movement of the hung door system.

Yes, as it is a technical rail with a clean geometry, it can house linear magnetic sensors or adapt to home automation systems with assisted opening. Its integration in false ceilings favours the concealment of wiring and facilitates connection to home automation control systems.

Matt anodising provides a protective coating that is resistant to moisture, scratching and oxidation, ideal for projects near wet or high traffic areas. Its durability is superior to standard lacquering and maintains aesthetics in demanding conditions.

Yes, the profile can be easily cut with an aluminium disc cutter. It is essential to remove burrs after cutting and to keep the profile clean at the ends so as not to compromise the passage of the carriage and the effectiveness of the integrated brake.

The following sketch shows details of the machining that should be carried out for the bracket of the Plus 4-4E-11-16-18 aluminium profiles.

The set includes 4 castors in total: 2 with brakes and 2 without brakes, as well as the screws required for installation by means of a mounting plate.

The castors are made with a sheet metal structure and a transparent plastic body with a flat plate, which gives them a modern and discreet finish, ideal for offices or youth rooms.

Each castor supports up to 40 kg, offering a reliable solution for light, everyday furniture in home or office environments.

They have a diameter of 35 mm and are recommended for occasional furniture, drawer units or desks where fluid movement is desired without compromising the visual design.

Thanks to their transparent plastic design and smooth surface, they provide a smooth ride that minimises the risk of marks on delicate floors.

The bracket is designed to accommodate glass shelves with glass thicknesses between 6mm and 10mm. The clamping system with lugs provides a firm fit, provided the glass thickness is within this range and the edge has been bevelled or tempered for safety.

No, this bracket allows direct installation without the need to drill holes in the shelf. Adjustment is made by pressure and contact with the nickel-plated steel plug, which fits firmly under the shelf, preventing displacement during use.

Although it has been specifically designed for glass, it can be used with melamine or wood shelves with rounded edges up to 10 mm thick. In these cases, however, it is advisable to carry out prior fixing tests to check the stability of the assembly.

For 16 mm panels, the use of 4 x 16 mm screws with chipboard or melamine thread is recommended. It is important not to over-tighten, as this could deform the bracket or damage the nickel-plated coating. In industrial installations, the use of screwdrivers with torque limiters is recommended.

For safe installation, the table top should be machined with a Ø20 mm hole to a controlled depth of 12.5 mm. This recess must be 1 mm from the panel edge to ensure the correct fit of the piston protrusion ring.

The plunger is part of the System 16 coupling system and is designed to mate directly with a compatible eccentric, without the need for additional hardware. Adjustment is by axial pressure and rotation, providing a robust and removable joint.

Recommended for use on chipboard, MDF or melamine boards 25 mm thick. For hardwoods or composite materials it is advisable to check the machining tolerance, as the hardness of the material may affect the accuracy of the fit.

The recommended tolerance for the bore diameter is ±0.1 mm. An out-of-tolerance bore may compromise the stability of the assembly or create clearances that affect the attachment of the eccentric to the plunger.

The zinc-plated finish provides corrosion protection and improves the mechanical strength of the zamak. This is especially important in high humidity environments or in heavy duty furniture where long term structural durability is required.

The bracket is designed for glass panels with a thickness of 4.5 mm, ensuring a firm fit without the need for additional adapters.

The bracket is pressed into a hole drilled in the side of the module. The stem is inserted 7 mm from the edge and secures the glass by means of its coupled shape with a 16 mm high support base.

The support base is 10 mm long and 16 mm high, providing a stable platform that prevents the glass panel from slipping.

Yes, this bracket is ideal for display cabinets, light shelving or decorative modules where a visually unobtrusive and effective fixing for glass shelves is required.

The product is presented in boxes of 2000 units, facilitating handling and replacement for furniture manufacturers, assemblers or professional installers.

The Luna cup is designed for boards up to 16 mm thick, being compatible with the most common thicknesses in home or bathroom furniture shelves.

Requires pre-machining with a Ø20 mm diameter housing, which can be carried out on the underside of the module or shelf where the cup is to be inserted.

Yes, the compact design and white or brown plastic finish allow for unobtrusive integration into the furniture, ideal for both open and interior shelves.

It acts as a plug-in support for shelves and shelves, providing a secure connection without the need for screws, which facilitates the assembly and disassembly of the shelves.

The Luna cup offers a hidden and resistant joining system, avoiding visible fittings and improving the aesthetics of the furniture without compromising the stability of the shelf.

The following video shows how you can easily assemble the microwave frame.

The bracket incorporates a 5 mm diameter, 10 mm long plastic wedge that is pressed into the pre-machined hole in the side of the cabinet. This press-fit fixing ensures quick installation without the need for additional tools.

It is designed to accommodate glass shelves with a thickness between 4 mm and 6 mm, securely fastened with a plastic screw included, preventing slippage and damage to the glass.

The body of the bracket measures 18 mm long by 8.7 mm high, allowing for unobtrusive integration into furniture structures while maintaining a high holding capacity without compromising on design.

The body is made of zamak, a tough alloy, and coated with a nickel-plated finish that offers excellent protection against corrosion and wear, ideal for wet or demanding environments.

The product is supplied in boxes of 1000 units, making it an efficient solution for joinery, furniture industries, technical distributors and manufacturers who require volume and reliability in their glass support systems.

The following video shows how the sliding door system for wardrobes is assembled.

The bracket is installed by means of a Ø5 mm knurled bolt which is pressed laterally into the furniture and a second bolt which reinforces the support.

The main bolt is Ø5 mm and the design allows use with shelves of any thickness.

The use of 4 Beak brackets is recommended to fix a shelf correctly.

Yes, it is suitable for wooden shelves regardless of the thickness of the board.

It is made of zamak and available in nickel-plated or black zinc-plated finish, depending on the selected reference.

The maximum load capacity is 10 kg per set of brackets, which is sufficient for standard domestic shelving.

The integrated hanger allows the stand to also be used as a coat rack, increasing functionality in small spaces such as hallways, bathrooms or kitchens.

It is recommended to use 600 mm long by 200 mm deep boards for a safe and stable installation.

The kit includes screws and mounting plugs for wall and shelf mounting. Wood screws (not included) can also be used if a more robust fixing is required.

The trolley has a height of 487 mm, a width of 245 mm and a depth of 470 mm. It is compatible with 300 mm wide modules and is suitable for 16, 18 and 19 mm boards.

Includes a basket with frame, a set of full-extension slides with cushioned closure and the screws required for assembly.

The border adjustment system allows adjustments in depth (±1.5 mm), horizontality (±2.25 mm) and height (±7.5 mm), facilitating precise and adaptable integration into different kitchen configurations.

It has full-extension roller guides with soft closing, which ensure smooth and comfortable sliding. It has a load capacity of up to 25 kg.

It is made of steel with an anthracite grey finish, making it ideal for modern kitchens looking for a functional, discreet and elegant aesthetic.

The following video shows how you can easily install the Zero system.

No, the assembly and positioning of the rails is the same in both the push and soft close versions.

This frame is designed to fit microwave ovens in 600 mm wide modules, being compatible with appliances up to 600 mm wide by 400 mm high, adjustable by cutting out the integrated grille.

Yes, it is supplied with mounting screws, positioning plugs and trim caps, facilitating quick and professional installation without the need for additional components.

Yes, the design incorporates a weakened grille that allows easy trimming of the internal louvres to achieve an exact fit to the size of the appliance.

Yes, the product includes a step-by-step installation guide, including measurements and recommendations for adjusting the grille cutout and positioning of the appliance.

It is designed for fixed and permanent installation, although it can be dismantled if the microwave needs to be replaced, without compromising the structural integrity of the frame.

No, the minimum unit depth is the same (depth + 5 mm).

The following video shows how you can easily install the aforementioned LED lighting.

The bracket has compact dimensions of 200 mm x 200 mm x 380 mm, allowing it to be easily installed inside cabinets, doors or walls, even in confined spaces.

It is designed to hold electric irons, ironing boards and auxiliary accessories, thanks to its upper metal basket and lower fastening hooks.

Yes, the kit includes mounting screws. Installation is simple and straightforward on the wall or inside the cabinet, without the need for special tools.

Yes, the lower hooks are designed to hold standard ironing boards, ensuring that they are securely fixed in place and prevent them from sliding out of place when the cabinet is opened.

The curved metal hooks secure the ironing board by the legs or base, preventing it from sliding or falling into the wardrobe.

I can use the Zero cable profile together with Zero cables and connectors to illuminate the shelves, using the lighting that best suits my design or I can backlight the structure by integrating the LED strips in the vertical profiles using the diffuser profile.

The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043. The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.

This set allows a complete module (such as cabinets, drawer units or closed structures) to be attached to the Zero profile system, providing a strong and aesthetic connection without the need for additional drilling of the profiles.

Kit includes: 1 set of brackets (2 pieces), 4 screws Ø3.5x16 mm, 2 M6 screws, 4 cover caps. All the necessary elements for a quick and professional installation.

No, installation is carried out without special tools. The bracket can be adjusted without tools, allowing the module position to be precisely adjusted, even after the profile has been fixed.

It is compatible with modules made of wood, melamine or technical board, which are integrated into the modular structure of the Zero system. Ideal for base cabinets, drawer units or shelving with a closed body.

Available in stone grey (RAL 7048) and textured black (RAL 9005), the brackets are made of zamak with high mechanical strength, and their design with trim caps ensures discreet and elegant integration into high-end projects.

It is designed to backlight Zero profiles using LED strips, providing an even diffusion of light from the rear of the profile.

The profile is compatible with the Lynx LED strip, although neither the strip nor the connection accessories are included in the product.

The installation is frontally on the profile, specifically on the rear side, and can even be carried out after the structure has been assembled.

It has a length of 1.1 metres and is made of polycarbonate with a white finish, which favours light diffusion and aesthetic integration.

Each unit contains 1 diffuser profile. The packaging is available in batches of 20 units.

It is designed to locate and conceal the installation cables, facilitating a clean installation in the Zero system.

Installation is from the front on the profile at the rear. It can also be installed retrospectively, once the structure has been assembled.

The profile incorporates flexible tabs that allow the cables to pass through and at the same time prevent them from slipping out, without the need for additional fixings.

It is available in lengths of 1.1 metres and 2.9 metres.

The supplements or bases that are used along with the hinges have two holes for fastening to the furniture and a third hole for increasing the resistance of the hinge/supplement joint. It is especially designed for facilities that require more resistance such as on doors with pistons.

It is made of plastic with a black finish, ensuring a discreet and robust installation within the Zero modular system.

The following video shows how such a system is easily assembled:

The following video shows how such a system is easily assembled:

The hinges are designed for glass doors with a thickness between 4 mm and 5 mm, ensuring a secure fit by means of a pressure screw.

Installation is done by fixing the hinge in the centre of the cabinet and tightening the glass with the included grub screw. No drilling of the glass is required.

They are made of zamak, a high-strength alloy, with a bright chrome finish for elegant aesthetics and durability.

Yes, the kit includes a right hand hinge and a left hand hinge, ensuring a complete assembly for the glass door.

No, this hinge model does not have a soft-close or damping system. It is recommended to use other accessories if this functionality is desired.

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The X95 hinge allows +2 mm / -2 mm adjustments in height, side and depth, which facilitates precise alignment of the door in the cabinet.

The hinge cup has a diameter of 35 mm, with a drilling range of 3 to 7 mm to ensure a proper fit in the door.

This X95 hinge model has a spring in the closing direction, which ensures a safe and smooth closing of the door.

It is recommended to use Ø4x16 mm or Ø3.5x16 mm screws, depending on the door material and the desired fixing strength.

This hinge is mainly designed for wooden doors from 14 to 22 mm thick, but with specific adapters it can be used on doors with an aluminium profile.

The kit includes full-extension slides with soft close, a set of ribs, a set of front hooks for the outer drawer, screws and assembly instructions.

The drawer has a load capacity of up to 50 kg. Its slides have a full-extension and soft-close system, allowing for smooth and silent sliding.

The mounting system allows eccentric adjustment of the front panel with an adjustment of ±2 mm vertically and ±1 mm horizontally, which facilitates precise alignment.

It is available in white and anthracite grey painted finishes. Its components are made from steel, which guarantees strength and durability.

To complete the assembly, it is only necessary to have the boards cut to the correct size for the bottom, back and border of the drawer.

The set of side rails improves storage in the drawers, allowing objects to be placed in an organised manner and preventing them from shifting during use.

These rails are available in depths of 270 mm (SKU 3015725) and 300 mm (SKU 3015825). The choice depends on the size of the drawer and compatibility with the drawer structure.

They are made of plastic and aluminium, with a metallised aluminium finish. These materials offer a combination of strength, lightness and modern aesthetics.

For their installation, it is necessary to have the specific rear and front brackets that allow them to be correctly fixed to the structure of the box.

These rails are designed for Vantage-Q drawers and are available in different lengths (from 270 mm to 500 mm) to suit different drawer depths.

The actuator allows Ultrabox drawers to close smoothly and shock-free, thanks to its shock absorbing piston that reduces the impact at the end of the stroke.

It is compatible with Ultrabox drawers and T30 castor slides, in lengths from 250 mm to 800 mm, ensuring wide compatibility with different drawer sizes.

It is installed easily and without additional labour, being fixed with one device on each side of the cabinet and one actuator on each side of the drawer. We recommend the use of screws Ø3.5 x 12 mm for the actuator and Ø3.5 x 20 mm for the device (not included).

It is made of high quality plastic, which provides lightness, resistance and an installation without risk of corrosion or deterioration due to continuous use.

Yes, several actuators can be installed in the same drawer if the soft closing effect is to be reinforced in larger furniture or furniture with a heavier load.

Yes, the drawer measurements, including its dimensions and machining, are fully compatible. The board cutting measurements, mounting dimensions and placement of the drawer in the module are exactly the same.This allows customers to mount 30 kg Concept slides and 50 kg slides on the same drawer.