4 spacers, 16 screws EURO Ø6,2x13mm

The side spacer is designed to be installed in cabinets with hinged or sliding doors in conjunction with the Hack pull-out frame. A spacer is required on the side of the cabinet where it mates with the door and is installed in the place where the guide goes.Its function is to leave a 25mm space between the frame and the side of the cabinet so that the door does not collide with the frame.

You can first install the spacer to the cabinet with Ø4x25mm screws and then join the guide with Ø6.2x13mm EURO screws. Or the spacer can be pre-mounted to the guide with clips that it incorporates, and then join the assembly to the cabinet with Ø4x40mm screws. Supplied with 1 lateral spacer and 8 EURO Ø6.2x13mm screws. It is made of plastic with a stone gray or black finish, depending on the selected model.

The Hack side spacer for frames is designed for cabinets with sliding or folding doors, allowing perfect integration of the frame in modern systems. Its installation ensures a precise fit between the runner and the side of the cabinet, leaving the necessary space for optimal system operation.

For manufacturers, this accessory is a key solution that improves the functionality and durability of cabinets equipped with the Hack frame. Its technical design ensures an exact fit that meets the requirements of modern enclosures, reducing potential installation issues.

Wholesalers and distributors can offer this spacer as an indispensable part to complete Hack enclosure configurations. It provides a strong selling point, as it facilitates installation and increases the versatility of the frame in different types of cabinets.

Carpenters and small shops appreciate its intuitive design and easy installation, which does not require complex tools. This Unit allows them to work quickly and provide a professional finish, which translates into satisfied customers.

In E-commerce and retail, this product is ideal for users looking to optimise the performance of their cabinets with specific solutions. It is a compact, economical and effective part that brings functionality and stability to the Hack system.

The use of the side spacer is necessary when the enclosure door coincides with the location of the frame and can collide with it, especially in enclosures with sliding or hinged doors.

A compatible screwdriver is required to install the Ø4x25 mm and Ø4x40 mm screws, according to the mounting specifications. No additional tools are required.

The spacer is 25 mm thick, which is the necessary distance to avoid collisions between the frame and the side of the enclosure.

This spacer is designed exclusively for the Hack pull-out frame, guaranteeing optimum compatibility with its slides.

Multiple spacers can be installed in a single enclosure if multiple Hack racks are used. Each package includes the components required for the installation of a single spacer.