2. Products
  3. Wardrobes
  4. Accessories for wardrobe
  5. Wardrobe hanging rods

Castor LED wardrobe rail with pull-out battery and motion sensor, L558mm, Plastic and Aluminium, Moka painted

5074013 / 8432393132112
ACutColour temperaturePowerPackagingFinishingSKU
558408-558Natural white 4.000 K0,6 W1 Unit
Moka painted
5074013
708558-708Natural white 4.000 K0,7 W1 Unit
Moka painted
5074113
858708-858Natural white 4.000 K0,9 W1 Unit
Moka painted
5074213
1.008858-1.008Natural white 4.000 K1 W1 Unit
Moka painted
5074313
558408-558Natural white 4.000 K0,6 W1 Unit
Matt anodized
5074062
708558-708Natural white 4.000 K0,7 W1 Unit
Matt anodized
5074162
858708-858Natural white 4.000 K0,9 W1 Unit
Matt anodized
5074262
1.008858-1.008Natural white 4.000 K1 W1 Unit
Matt anodized
5074362
1.1581.008-1.158Natural white 4.000 K1,2 W1 Unit
Matt anodized
5074462

Product features

  • Built-in motion sensor which allows to switch on the lighting when approaching less than 1,5 metres and that switch it off 15 seconds after having left the detecting range.
  • Powered with an extractable battery, which can be recharged by using a 5V DC 1A mobile charger with a micro USB type B port (not included) with no need to disamble the hanging rail.
  • To be installed in wardrobes with an inner width between 408-558mm. The hanger rail can be cut to fit the wardrobe inner size.
  • Rail made of aluminium in moka colour with semi-rigid PVC rubber to avoid hangers noise.
  • Easy wireless installation thanks to the lateral brackets and assembly screws supplied.
  • Sensor detecting range: 1,5 metres.
  • Sensor detecting angle: 90°.
  • LED quantity: 30.
  • Colour temperature: Natural White (4.000K).
  • Luminous flux: 30 lm.
  • Power: 0,6W.
  • Beam angle: 120°.
  • Protection class: IP20.

Hanger rail for wardrobe or closet with LED lighting and motion sensor powered by an extractable battery located in one of the lateral supports and hidden under a cover, which can be easily charged by using a 5V DC 1A mobile charger with a micro USB type B port (not included) with no need to take off the hanging rail. The battery has a LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.

Its built-in motion sensor allows to switch on the lighting when approaching less than 1,5 metres and switch it off 15 seconds after having left the detecting range.

The tube is made from aluminium with semi-rigid PVC rubber to avoid hangers noise, and can be cut to fit the cabinet inner size.

Easy wireless installation thanks to the lateral brackets and fixing screws supplied. The best solution to light up the wardrobe interior to easily find the garments in the dark.

Components

1 rail, 1 rechargeable battery, 2 side supports, screws and mounting instructions

Documentation

FAQ

The following video shows how you can easily install the aforementioned LED lighting.

Yes, we recommend fully charging the battery of the Castor luminaire before installation.Although some batteries may be partially charged upon arrival, the charge will be minimal and simply for testing purposes. Therefore, a fully charged battery should be used for installation.

The Castor battery-powered light has a range of 700 lighting cycles per charge before the batteries run out.

The battery of the Castor light is recharged with a mobile charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.This battery is located on the side support with a cover, which must be taken off in order to recharge it.Likewise, it has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.

The battery has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.

Recently viewed

Castor LED wardrobe rail with pull-out battery and motion sensor, L558mm, Plastic and Aluminium, Moka painted product photo
Castor LED wardrobe rail with pull-out battery and motion sensor, L558mm, Plastic and Aluminium, Moka painted
View All