• Lighting kit to be installed in cabinets or furniture where switching on and off is required by passing the hand. Includes a 5m LED strip, 2 cables, 2 converters and 2 sensors.
• The LED strip has an efficiency of 84 lm/W, protection index IP20, warm white color temperature (3,000 K), lighting angle 120°, 120 LEDs/m, luminous flux of 805 lm/m and power 9 .6W/m (48W total). Supplied in a continuous roll of 5m, dimmable and cuttable every 3 LEDs (2.5 cm), made with a double layer PCB and 3M® 300LSE adhesive tape for fixing.
• The cable has a length of 1.5 m and an AMP connection, it is designed for 12V DC LED strips with a width of 8 mm and incorporates a connector that allows a quick, easy and safe connection to the converter.
• The sensor turns the LED strip on and off when its 3 cm sensing range is interfered with, such as by passing your hand over the sensor. It works at 240V AC, it has a small head with a 1.5m cable and a power cable with a TYPE 8 plug to connect directly to the converter.
• The converter has a power of 30W, a constant voltage of 12V DC (Input 100-240V AC - 50-60Hz, Output 12V DC), protection index IP20 (suitable for dry areas), with an AMP distributor with 6 outputs and 2 cables. m, which allows you to connect another cable with a different plug (depending on the market).

5m LED strip, 2 Cables, 2 drivers 12V DC, 2 sensors SWITCH