Frequently asked questions
Yes, the hinges and accessories come with Ø4x16 mm screws with the same titanium finish.
The following video shows how you can easily assemble a lifting piston.
The following video shows how you can easily assemble the Lokbox mechanism.
The X91/X92 hinge insert has a diameter of 10x11 mm and a specific height of 2 mm (or other options depending on the model). It is designed to guarantee a firm fixation by means of a clip system, which allows a perfect and easy adjustment to the hinge insert. These features ensure a precise and professional installation.
For proper installation, pre-drilling to the following specifications is required:
32 mm distance between holes.
37 mm distance from the edge of the door to the first hole.
11 mm deep holes.
These dimensions ensure that the supplement fits perfectly and guarantee the stability of the hinge.
The snap-on coupling system allows quick connection without the need for additional tools. This mechanism facilitates the assembly and disassembly of the supplement, which reduces installation time. It also ensures a secure and stable fixing, minimising the risk of misalignment over time, which is not as easily achieved with traditional fixing methods such as screws.
Yes, the insert is designed to be compatible with door thicknesses from 14mm to 24mm, making it suitable for most standard furniture used in kitchens, bathrooms and other spaces.
The supplement is made of high-quality steel with nickel-plated finish (or titanium, depending on the model). These materials offer high resistance to corrosion and wear, even in wet environments such as kitchens and bathrooms. This design ensures a long service life and reliable performance, even in demanding conditions.
The following video shows how you can easily assemble the Vantage-Q drawer.
The X91 90° angle arm hinges feature a specialised design for corner and corner furniture, allowing precise and efficient installation in complex configurations. Their adjustability and soft-close system make them superior to standard models.
The 110° opening angle allows full access to the inside of the furniture, optimising functionality and facilitating daily use. This is especially useful in high-traffic furniture, such as kitchens and bathrooms.
These hinges feature an automatic clip system, which facilitates mounting to the supplement without the need for complex tools. In addition, the included screws and adjustable design simplify the installation process, reducing the time and effort required.
Their angled design allows corner furniture doors to open and close smoothly, making the best use of space. This makes them ideal for configurations where traditional hinges are not practical.
They include a three-dimensional adjustment system using eccentric screws, which allows the height, side and depth of the door to be adjusted. This ensures perfect assembly, even on uneven surfaces or furniture with tight tolerances.
The springless X91N supercock hinge is perfect for furniture with magnetic closures because it allows controlled closing without additional resistance, ensuring a smooth user experience and compatibility with modern locking systems.
The absence of a spring eliminates the return force in the closure, making the hinge depend solely on the magnetic closure or other external mechanisms. This facilitates the design of more versatile and functional furniture.
To install this hinge, a pre-drilling of 35 mm in diameter and 3 to 7 mm deep must be carried out in the cup. The automatic clip system is then used to attach the hinge to the supplement, securing the fixing by means of eccentric screws.
The three-dimensional adjustment allows the height, depth and side of the door to be adjusted, ensuring perfect alignment with the furniture. This is especially useful for correcting misalignments and ensuring a professional finish.
Nickel-plated or titanium steel finishes not only provide corrosion resistance and durability, but also add an elegant aesthetic touch, enhancing the overall appearance of the furniture and adapting to different design styles.
The X91 straight hinge with 165° opening is ideal for kitchen and bathroom furniture because it allows full access to the inside of the furniture, improving functionality and facilitating use in spaces with a high frequency of opening.
The soft-close system reduces the impact of the doors closing, eliminating sudden bumps and rattles. It also prolongs the life of the furniture and improves the user experience compared to hinges without damping.
This hinge is compatible with door thicknesses from 14 to 26 mm and requires 35 mm diameter holes in the cup and a range of 3 to 7 mm depth, ensuring a precise and secure fit.
The automatic clip system simplifies assembly, allowing the hinge to be attached to the supplement quickly and without additional tools. This significantly reduces installation time and effort.
The depth adjustment by means of an eccentric screw allows precise adjustments, correcting possible misalignments and ensuring that the door closes perfectly aligned with the furniture, even on uneven surfaces.
Yes, for the assembly of the rectangular under sink insert it is necessary to make a 90º angle straight machining cut, although it is recommended to make a machining cut with a radius of 20 mm.
The X91 elbow hinge with soft close improves the functionality of the furniture by ensuring a controlled and silent movement, prolonging the life of the furniture and offering a more comfortable and secure closure.
This hinge is suitable for standard door thicknesses between 14 and 24 mm, making it versatile for most furniture in kitchens, bathrooms and offices.
Precise adjustment is achieved thanks to the three-dimensional adjustment, which allows the height, side and depth of the door to be adjusted, ensuring perfect alignment with the furniture.
The shock absorbing piston eliminates abrupt shocks during closing, providing a smoother user experience and preventing premature wear of furniture components.
The cup drilling range of 3 to 7 mm allows greater flexibility when installing the hinge, ensuring compatibility with different furniture designs and facilitating adjustments during assembly.
The eccentric adjustment allows precise adjustments to be made to the door position, ensuring exact alignment with the furniture. This is essential for furniture where tolerances must be kept to a minimum.
The snap-in installation system with integrated ramps eliminates the need for additional screws, facilitating fast and secure assembly. This simplifies the installer's work and ensures a firm hold.
The 10x11 mm diameter ensures compatibility with standard bore holes and a stable connection to the furniture board, providing suitable support for X91/X92 hinges.
This supplement is ideal for furniture such as kitchen and bathroom cabinets, where a precise fit and sturdy mounting is required on doors with high daily use.
The nickel-plated finish not only enhances the aesthetics of the insert, but also protects it against corrosion, increasing its lifespan and making it easier to clean in wet or high traffic environments.
The following video shows how you can easily assemble the Ultrabox drawer.
The RAL code of the white finish of the sides of the Ultrabox kitchen drawer is approximately 9001.The RAL code of the aluminium finish of the sides of the Ultrabox kitchen drawer is approximately 9022.
We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).
The 165° opening allows full access to the cabinet, improving functionality in applications where it is necessary to maximise space, such as corner cabinets or large storage cabinets.
The joint use of hinges and shims ensures secure support, improves door alignment and facilitates installation, especially in projects requiring high precision and durability.
Precise installation requires drilling holes 35 mm in diameter and 3 to 7 mm deep in the cup, ensuring that the doors are between 14 and 26 mm thick, and using the included screws to securely attach the shims and hinges.
The depth adjustment allows fine adjustments to be made to the position of the doors, correcting misalignments and ensuring that closing is smooth and functional, even on furniture with uneven surfaces.
Nickel-plated steel not only protects against corrosion and wear, but also provides an aesthetic finish, essential for furniture in wet or heavy use environments such as kitchens and offices.
The drilling depth of 12 mm ensures a deep and stable fixing, preventing misalignment even on doors subject to continuous use or high dynamic loads.
For a secure fixing, it is important to check the compatibility of the insert with the thickness of the board and to adjust the drilling tolerances according to the material to avoid breakage or misalignment.
The 37 mm distance from the inner edge allows a mounting that respects the standard tolerances, guaranteeing a correct alignment of the hinge with the supplement and the furniture.
The design of the insert distributes the forces generated by the door movement, reducing stress on the fixing points and extending the durability of the system in high usage projects.
The nickel-plated finish protects the supplement against corrosion and abrasion, ensuring long-lasting functionality in environments such as kitchens, where chemicals and moisture are common.
The following video shows how to assemble runners for Silver drawer.
The following video shows how to adjust runners for Silver drawer.
In order to guarantee an optimal closing, the installation must include a 35 mm diameter cup hole, respecting a drilling range of 3 to 7 mm and ensuring compatibility with door thicknesses from 14 to 26 mm.
The damping piston controls the movement of the doors, ensuring smooth and quiet closing, which protects the hinges and prolongs the life of the furniture in heavy use environments.
Respecting the 3 to 7 mm drilling tolerances ensures that the hinge fits tightly into the cup, avoiding unwanted movement and guaranteeing a stable installation.
Three-dimensional adjustment allows height, side and depth adjustment, correcting misalignments and ensuring that the doors are perfectly aligned with the furniture frame, even in bespoke designs.
The nickel or titanium finish protects the hinge against corrosion and wear, offering a durable solution for applications in kitchens, bathrooms or environments with high humidity and continuous use.
Yes, the drawer measures are the same in the Silver and Slippe with partial and/or total extension with clips.
No, the drawer measures are different between.
The drilling range of 3 to 7 mm ensures optimum fit between hinge and cup, providing structural stability and precise alignment for compatible doors.
The cushioned closure avoids sudden impacts when closing, protecting both the hinge and the door, prolonging its life and improving the user experience thanks to a silent movement.
The elbow design allows a partial overlap of the door, ideal for furniture with angular configurations or corner designs that require a specific solution to optimise space.
The three-dimensional adjustment allows precise height, side and depth adjustments, ensuring professional installation and perfect alignments on doors of different thicknesses.
The 105° opening angle is ideal for kitchen, bathroom and storage furniture, where convenient and wide access is needed, without interference with adjacent structures.
No, the drawer length is 10 mm longer in the case of the Silver rail. Also, the position of the adjustment and locking pivot is different.
Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver total pull-out slides with push to open function and the Silver soft-close total pull-out slides on the same drawer.However, they are not compatible with the Slippe total pull-out slides with push to open function.
The installation must include a 35 mm diameter cup hole with a drilling range of 3 to 7 mm and respect a door thickness between 14 and 26 mm to ensure a precise fit.
The three-dimensional adjustment allows for height, side and depth adjustments, correcting misalignments and ensuring that the doors are perfectly aligned in technically demanding projects.
The shock absorbing piston ensures smooth and shock-free closing, reducing wear and tear on the hinges and protecting the furniture against repeated impacts in heavy use environments.
The board must be prepared with holes of 5 mm diameter and a depth of 12 mm, as well as a spacing of 32 mm between fixing points, to ensure the stability of the supplement.
The combination with 0-height supplements allows precise alignment of the doors, optimising their functionality and facilitating quick adjustments in modular and adaptable furniture design.
Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver partial pull-out slides with push to open function and the Silver soft-close partial pull-out slides on the same drawer.However, they are not compatible with the Slippe partial pull-out slides with push to open function.
Nickel-plated steel provides excellent corrosion and wear resistance, making the hinges ideal for wet or greasy environments such as kitchens and bathrooms, prolonging their service life.
The drilling range of 3 to 7 mm ensures a stable fixing of the hinges, preventing misalignment of doors and allowing precise installation even in demanding configurations.
The correct functioning of the soft closing is guaranteed by the damping piston, which absorbs impacts when closing the door, reducing noise and protecting both the hinge and the furniture from intensive use.
The three-dimensional adjustment allows adjustments of +/-2 mm in height, side and depth, correcting misalignments and ensuring perfect closing even on doors with complex installation.
These hinges comply with international quality and resistance standards such as ISO 9001, ensuring durability and performance in furniture subjected to intensive use and demanding conditions.
The locking pivots that are mounted on the Silver guide rails are designed in order to easily fasten the drawers to the guide rails, thus preventing them from falling during transportation or handling.These pivots avoid the use of additional screws and for their assembly you only need a small hole in the side of the drawer. In this manner the drawer can be assembled and disassembled as many times as you wish.
X91N super elbow hinges are designed for full overlap doors, offering greater flexibility in tight spaces, unlike standard straight or elbow hinges which are ideal for partial overlap configurations.
The pre-drilling should be 35 mm in diameter and a depth range of 3 to 7 mm, ensuring a tight fit and avoiding misalignment in door thicknesses of 14 to 24 mm.
The damping piston ensures a smooth and silent closing, reducing impacts on the furniture and prolonging the life of both hinges and doors, especially in frequently used furniture.
The eccentric adjustment allows depth adjustments to be made with millimetre precision, ensuring that doors are perfectly aligned, even on furniture with customised or irregular designs.
For efficient installation, the drilling specifications must be respected and the Euro screws included must be used, ensuring the correct fixing of the supplements to the furniture and facilitating quick adjustments in large-scale projects.
The 35 mm cup is an industry standard, offering an optimal balance between stability and compatibility with different door thicknesses, guaranteeing a safe and sturdy installation.
The drilling range of 3 to 7 mm allows for flexibility in installation, adapting to different types of doors and ensuring a precise fit without compromising stability.
To ensure proper fastening, it is necessary to respect the drilling specifications of the shims, using Euro screws with a centre-to-centre distance of 32 mm and an entry depth of 12 mm.
The spring-loaded latch is designed to absorb impact and reduce wear and tear, providing smooth, controlled closing even on doors that are subject to frequent opening and closing.
In furniture with irregular finishes, the X92N hinges allow for depth, height and lateral adjustments by means of their three-dimensional adjustment, ensuring perfect closure and precise alignment.
No, this runner has different drawer mechanisms, as well as a different length.
The X92 elbow hinges are designed to fit perfectly on doors from 14 to 24 mm thick thanks to their three-dimensional adjustment system and standard 35 mm cup, ensuring an optimal and stable fit.
The clip-on mounting system allows for quick installation without additional tools, ensuring precise fastening and reducing assembly times on large volume projects.
The three-dimensional adjustment offers +/-2 mm height and side adjustments, as well as depth adjustments, allowing you to correct misalignments and ensure a perfect seal on custom-designed furniture.
The soft closing system avoids sudden impacts by cushioning the movement of the door, protecting both the hinge and the structure of the furniture, and prolonging the life of both components.
Pre-drilling should be carried out with a diameter of 35 mm, a depth of 3 to 7 mm and a centre-to-centre distance of 32 mm, which ensures a solid and precise fixing of the shims.
The 35 mm cup provides a larger contact area, increasing stability and allowing for a robust and durable installation in door thicknesses from 14 to 24 mm.
The depth adjustment by means of an eccentric screw allows precise control of the door position, correcting possible misalignments and ensuring a uniform and aesthetic closure.
The soft closing system automatically adapts to doors of different thicknesses, absorbing impacts and providing a controlled closure, ideal for intensive use in kitchen furniture and cupboards.
The clip mounting significantly reduces installation times, offering secure fixing without the need for additional tools, making it ideal for large-scale professional projects.
To install the 0-height supplements, pre-drilled holes with a diameter of 35 mm, a depth of 12 mm and a centre-to-centre spacing of 32 mm must be drilled to ensure optimum and aligned fastening.
The difference between the hidden Slippe rails with a hook as opposed to those that do not have a hook, is the possibility of disassembling the drawer with a simple click.
The X91R elbow hinge features soft closing with damping and a three-dimensional adjustment range of ±3 mm in depth, making it ideal for door thicknesses from 16 to 22 mm.
The three-dimensional depth adjustment allows correction of misalignments up to ±3 mm, facilitating exact adjustment for professional installation and guaranteeing optimum opening and closing.
It offers a cushioned closing system, reducing impacts when closing, minimising noise and increasing the durability of the furniture, ideal for high use applications in kitchens and bathrooms.
It is compatible with the X91 and X92 inserts, which facilitate stable mounting and allow the alignment and aesthetics of the furniture to be maintained.
The Ø35 mm cup has standard dimensions that guarantee a secure and resistant fit, optimising the fixing to the furniture with greater stability and durability.
The adjustment of the hidden runners for Slippe drawers without a hook is achieved by turning the washer on the front fastening pivot, which is screwed for that purpose.
The hinges are compatible with door thicknesses between 14 and 24 mm, ensuring correct installation on a wide variety of furniture.
The straight supplement allows a height adjustment of ±1.5 mm by means of an included eccentric screw, ensuring precise levelling after installation.
The soft closing is achieved by a damping piston integrated in the hinge, which reduces impacts and ensures controlled door movement.
The required drilling range for the cup is from D = 3 to 7 mm, ensuring correct alignment and fixing to the furniture door.
Both hinges and shims are made of nickel-plated steel, a corrosion and wear resistant material with an aesthetic finish that guarantees long life and performance.
The set includes specific screws for fixing to 35 mm cups and screws for the supplement, compatible with standard boards and ensuring a firm and precise installation.
The X91 elbow hinge allows three-dimensional height, depth and lateral adjustments thanks to its integrated eccentric adjustment and automatic clip mounting system.
These hinges have an opening angle of 105°, ideal for ensuring accessibility and functionality in kitchen, office or cupboard furniture.
The straight supplement allows ±1.5 mm height adjustment by means of an eccentric screw and has a design that remains concealed under the hinge arm once installed.
No, this batch is specifically designed for doors with a thickness of 14 to 24 mm and is not compatible with thicker thicknesses.
The drilling range required to install the hinges is 3 to 7 mm from the edge of the furniture, while the straight supplement requires standard drillings of 35 mm diameter.
The X91 super bend hinges are designed to withstand standard loads in kitchen, bathroom or wardrobe furniture, ensuring optimum performance even with heavy doors.
The perfect alignment of the door is guaranteed by the three-dimensional adjustment (height, depth and side) and the eccentric screw of the supplement.
Yes, the soft-close system is ideal for intensive use, as the damping piston reduces wear and improves the durability of the mechanism.
The straight supplement of this batch is distinguished by its compact design, which is concealed under the hinge arm, and by its full compatibility with the X91 and X92 hinges.
The depth adjustment range is ±3 mm, while the supplement offers a vertical adjustment of ±2 mm, ensuring perfect door alignment.
No, the clip system is designed for quick and easy installation without the need for special tools.
The damping piston provides a gradual resistance that reduces the impact of closing, ensuring a quiet and smooth movement even on heavy doors.
The eccentric adjustment allows precision adjustments to correct minor misalignments in doors, optimising their functionality and final appearance.
Yes, the 105° opening angle is ideal for furniture with limited space, as it allows full access without interfering with walls or internal elements.
Installation is by screwing into the sides of the Vertex drawer front panel, ensuring a firm and adjustable fixing.
The hooks are made of high quality plastic, which guarantees durability, resistance to daily use and structural stability.
The stability of the front panel is achieved thanks to the design of the latches, which provide a secure and stable fit, even under continuous load.
This product is specifically designed for 131 mm high drawers, so it is not compatible with other heights.
The white plastic is lightweight, moisture resistant and easy to clean, making it ideal for applications in domestic environments such as kitchens and bathrooms.
It is recommended to mount 2 soft-close devices per each Padplast drawer with the corresponding actuator, one on the right and another on the left of the drawer although they do not have sides.
The following video shows how you can easily assemble the Miniwinch system.
Yes, the soft closing for the Padplast office drawer is compatible with the 27 mm high Paddock guide rails with partial extraction and the 35 mm high Paddock guide rails with total extraction, aside from the 45 mm high Paddock guide tails with total extraction because it already has soft closing.Also, the soft closing for the Padplast office drawer is not compatible with the anti-overturn Paddock lock.
The Vertex 83 mm front attachment kit is compatible with 83 mm high front panels.
Installation is carried out by screwing the hooks to the sides of the front panel of the drawer, ensuring a firm and stable fixing.
The hooks are made of high quality plastic, which makes them strong, durable, easy to clean and aesthetically pleasing.
No, only screws, which are usually included in the kit, are needed for easy installation.
This system makes it possible to optimise the space inside the drawer, while maintaining a functional and aesthetic design in the storage modules.
This set of hooks is compatible with interior drawers of height 178 mm of the Vertex system.
The hooks are made of high quality plastic, offering durability, resistance to continuous use and ease of cleaning.
Installation is carried out by screwing the hooks on each side of the front panel of the drawer, ensuring a secure and stable fit.
Yes, the latches are designed to keep the front panel fixed and stable for long periods, even with frequent use.
These attachments are specifically designed for the Vertex system, ensuring perfect compatibility with its 178 mm high panels.
This attachment set is designed for standard thickness front panels compatible with the Concept system.
Yes, the hooks allow precise adjustment of the front panel, ensuring perfect alignment in the drawer.
High-strength plastic construction and robust design ensure optimum performance in high-performance applications.
No, installation is simple and only requires basic tools such as a screwdriver.
Yes, these couplings are fully compatible with other components of the Concept system, ensuring efficient integration.
This Vertex drawer rib is available in a height of 93 mm and depths of 400 mm and 500 mm, allowing it to be adapted to different drawer configurations.
Yes, it is fully compatible with other elements of the Vertex line, ensuring an integrated and functional assembly.
It is made of steel with an anthracite grey finish, which provides high resistance to everyday use and ensures long-lasting durability.
The stability of the drawer is achieved by the robust design of the rib and its installation on the left side of the drawer, ensuring optimal support for distributed loads.
The anthracite grey finish not only offers an elegant design, but also provides resistance to wear and tear, keeping it in excellent condition for everyday use.
The front profile for the Vertex internal drawer is attached to the system by means of a set of front connectors, which makes it easy to install and ensures a stable connection.
Painted aluminium provides a corrosion-resistant and easy-to-clean surface, which reduces maintenance costs and ensures a long service life of the profile.
Yes, the front profile can be installed on drawers with or without rails, depending on the user's needs and the drawer design.
No, the front profile does not include additional accessories for mounting. However, it must be combined with the specific front attachments depending on the height of the Vertex drawer.
The design and finish of the front profile allows for aesthetic and functional integration with other components of the Vertex system, achieving a uniform result in terms of appearance and functionality.
Maximum load capacity: Silver slides have a load capacity of up to 30 kg, which makes them ideal for domestic drawers with a considerable load.
Available adjustments: The guides allow adjustment in three directions: vertical (+3 mm), horizontal (+1.5 mm) and in depth (+3 mm), facilitating precise installation and a perfect fit.
Smooth closing: The self-closing system and the damping piston integrated in both slides prevent sudden shocks, prolonging the life of the drawer and offering a silent and smooth closing.
Depth compatibility: These slides are available in a variety of sizes, including depths of 290, 340, 390, 440, 490, 540 and 590 mm, adapting to different design needs.
Durability of design: They are made of zinc-plated steel, which ensures corrosion resistance and high durability, even under intensive use.
Maximum supported weight: These hooks are designed to support the weight of standard front panels on Vertex interior drawers, ensuring stability and functionality under normal domestic use.
Front panel stability: The design includes secure fixing points that immobilise the front panel to the hitch, preventing disengagement during prolonged use.
Screw compatibility: The couplings are compatible with standard screws for fastening into wood panels or derived materials with suitable thicknesses.
Tools required: No special tools are required; mounting is easily done with a standard screwdriver.
Material resistance: The plastic used in the couplings is of high quality, resistant to wear, impact and normal environmental conditions, but is not specifically designed to withstand high temperatures or aggressive chemicals.
The thickness of the table or desk can range from 10 mm to 88 mm.
The Vertex outer box has a depth of 450 mm and a specific height of 93 mm.
The maximum load capacity of the drawer is 40 kg.
The front adjustment allows adjustments of ±2 mm vertically and ±1 mm horizontally for perfect alignment.
The sides are made of steel with an anthracite grey or white painted finish, depending on the model.
This drawer is compatible with 16 mm thick boards for both the bottom and the back of the drawer.
The Miniwinch folding door system can be installed in both wooden and aluminium doors.You only need to consider that it needs a door with A+10 where A is the side thickness of the furniture.For example, if the side thickness of the furniture is 19 mm, the door will be fitted at 29 mm.If the aluminium profile is 45 mm wide, it can be fitted because it can go inside the profile.We can also use the Ankor hinge in this combination, because it can fit easily.
The soft closing system is guaranteed by a damping piston integrated in both guides, providing a smooth and silent sliding.
These slides have a maximum load capacity of 30 kg.
They offer a vertical adjustment of ±4.5 mm, allowing precise adjustment of the drawer position.
The rollers are made of delrin, a high quality material that ensures smooth running and optimum guidance in both horizontal and vertical directions.
The slides are available in depths of 250 mm, 300 mm, 350 mm, 400 mm, 450 mm, 500 mm and 550 mm.
No, for situations where you want to reinforce the attachment of the profile, you can place two clips at each end with a lower spacing.
The remaining clips can be installed at an equivalent distance even if it is slightly greater than 500mm.
Example of reinforced mounting:
The push-opening system allows the drawer to open automatically with a slight pressure on the front, eliminating the need for handles.
These slides have a locking pivot mounted on the slide itself, ensuring that the drawer remains closed until operated.
The slides offer a vertical adjustment range of ±4.5 mm for precise drawer adjustment.
The rollers are made of delrin, a high quality material that guarantees smooth and quiet running and optimum guidance in both horizontal and vertical directions.
These full-extension slides have a maximum load capacity of 30 kg.
These slides are compatible with drawer depths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm and 490 mm, depending on the model selected.
The push system allows the drawer to eject automatically when pressure is applied to the front of the drawer, eliminating the need for handles.
These guides offer a vertical adjustment range of ±5 mm for precise adjustment.
The locking pivot ensures that the drawer does not unintentionally dismount from the slide and maintains its stability.
These slides have a maximum load capacity of 25 kg.
The Silver concealed slide set supports a maximum load of 30 kg, ideal for home furniture.
These slides include a locking pivot mounted on the slide itself to secure the position of the drawer and prevent unintentional disassembly.
They offer a vertical adjustment of ±4.5 mm, which facilitates the precise adjustment of the drawer.
They are made of steel, which guarantees durability, strength and a smooth and quiet operation thanks to the high quality delrin bearings.
This model is available in depth lengths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm, 490 mm, 540 mm and 590 mm to suit various furniture design needs.
The tempered glass used on the sides of the Vertex drawer is 6 mm thick, ensuring impact resistance and a modern aesthetic design.
The Vertex drawer slides with glass sides have a maximum load capacity of 40 kg, ideal for intensive use.
The eccentric adjustment of the front panel allows adjustments of ±2 mm vertically and ±1 mm horizontally, ensuring precise alignment of the drawer.
The ribs are made of high quality painted aluminium, while the slides are made of steel with a synchronised full-extension system and damped locking.
The boards used for the back and rear panels must be 16 mm thick to ensure correct and stable assembly.
The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.
The synchroniser is designed for Vertex slides with Push Syncro 2 and allows synchronised opening and closing by pressing the drawer front at any point.
The bar has a maximum length of 1,200 mm and is suitable for module widths of more than 600 mm, optimising its function in wider furniture.
The bar is made of natural aluminium, which guarantees lightness, durability and corrosion resistance, making it ideal for extended opening systems.
It is recommended to use the synchroniser in drawers wider than 600 mm to guarantee a uniform and simultaneous opening of the slides.
Yes, the synchroniser includes the possibility to cut the bar to fit different module widths, offering flexibility in installation.
The rear hooks allow rails to be fitted to drawers without the need to machine the side edges of the rear panel, facilitating installation.
The design of the fixture directly covers the side edges of the rear panel, eliminating the need for additional machining on the part.
With this set of rear hooks and a rail, it is possible to configure double or half-height drawers, adapting to different storage needs.
They are made of plastic with a durable finish, ensuring strength, lightness and an aesthetic appearance in keeping with the design of the drawer.
No, the accessory allows manual height adjustment without additional effort, offering an intuitive and efficient installation.
The thickness of the board required for the bottom and back of the drawer should be 16 mm to ensure a safe and stable installation.
This kit supports a maximum load of 60 kg thanks to the metal ribs and soft closing rails, which ensure stability and strength even under heavy weight.
The drawer front allows a position adjustment of ±2 mm vertically and ±1 mm horizontally, facilitating precise adjustment during installation.
The side ribs are made of anthracite grey painted steel or painted aluminium, offering high resistance to prolonged use, durability and an elegant finish that integrates perfectly into modern spaces.
Synchronised full-extension slides provide smooth and quiet gliding, allowing full access to the drawer interior, which is especially useful in kitchen and bathroom applications where optimised access is critical.
The following video shows how you can easily install a Holdy hanger.
The adjustable tray can be repositioned within the organiser to ensure that the spice jars are held securely in place and at the optimum inclination for use.
The organiser holds up to 6 spice jars, keeping them safe and organised.
The slope of the organiser ensures that the jars are easily visible and accessible, allowing for quick and effortless grabbing.
Phenolic laminate offers water resistance, anti-bacterial properties and corrosion durability, ideal for use in kitchen environments.
The dimensions of the organiser (150x470mm) make it compatible with most standard kitchen drawer sizes.
The following video shows how you can easily install a Strong hanger.
The kit includes synchronised full-extension slides, with cushioned closure and a load-bearing capacity of up to 40 kg.
The recommended board thickness for the bottom and back of the drawer is 18 mm.
The drawer front can be precisely adjusted by means of an eccentric of ±2 mm vertically and ±1 mm horizontally.
Yes, the metal components are made of steel with an anthracite grey painted finish, which enhances strength and aesthetics.
No, the kit includes all the necessary elements: guides, side ribs, front hooks and screws, so there is no need to purchase additional elements.
The kit includes synchronised full-extension slides with cushioned closing, which guarantee a smooth and silent sliding of the drawer, improving its functionality and comfort.
The drawer supports a maximum load capacity of 40 kg, thanks to the included heavy-duty slides.
The front of the drawer can be adjusted by means of an eccentric, allowing an adjustment of ±2 mm vertically and ±1 mm horizontally.
The side ribs are made of steel with a stylish anthracite grey painted finish, providing strength, durability and a modern aesthetic.
For the bottom and back of the drawer, we recommend using 18 mm thick boards for a perfect fit and safe assembly.
The bottom Strong 32 mm bracket is designed to offer greater adjustment of the position of the unit horizontally and vertically. However, for this unit bracket, it is necessary to have the back part at a minimum distance of 32 mm in relation to the fastening wall.The bottom Strong 3 mm bracket has less adjustment and the back part has to be kept a minimum distance of 3 mm from the fastening wall.
This drawer is compatible with modules that allow a depth of 450 mm and are suitable for 18 mm thick back and front panels.
The kit includes slides, side ribs, a set of front hooks for mounting the drawer and screws required for installation.
This product complies with quality standards such as CATAS and FCBA certifications, guaranteeing its durability and resistance for intensive daily use.
The synchronised full-extension system provides smooth and silent sliding, optimising access to the interior of the drawer by allowing the full capacity to be utilised.
The trim covers enhance the aesthetic design of the drawer by covering the fixings, offering a clean, modern finish that blends in perfectly with the furniture.
This plate is compatible with the drawers of the Vertex, Concept and Convex ranges.
Installation is simple, as the plate is fitted to the side of the drawer by means of a clip located in the lower area, ensuring a firm and quick fixing.
Yes, the front of the plate can be screen-printed with a customised logo or design according to the customer's needs.
The plate is made of polypropylene with a finish available in various colours, such as white, grey and anthracite grey.
Yes, the plate can be installed on the left or right side of the drawer, as required.
This accessory is compatible with drawers with a height of 178 mm and modules with a maximum width of 1200 mm.
To complete the installation, the aluminium front profile and the 6 mm thick glass panel must be purchased separately. These elements are not included in the set.
It is compatible with Vertex drawer kits with metal sides and glass sides.
The position of the guide must be adjusted by moving it further back, using the third hole instead of the fourth hole, as indicated in the instructions.
This accessory is made of anthracite grey plastic, offering a modern and elegant finish that matches different styles of furniture.
An LED light may flicker for several reasons, in order to know the cause, you must:Check that the LED light is connected to the correct type of converter, constant voltage or constant intensity.Check that the power of the converter is not less than the total power of the LED lights connected to the converter.Check that that the converter is not overheating. The converter needs to have a suitable operating temperature. The operating temperature is printed on the converter.
Maintenance required: These slides require minimal maintenance. It is recommended to clean the tracks regularly with a dry cloth to avoid dust accumulation and to apply a specific hardware lubricant if any sliding resistance is felt.
Compatibility with customised designs: The slides are compatible with customised drawers as long as they comply with the technical specifications, such as a depth of 290 mm, a maximum weight of 25 kg and internal dimensions in accordance with the slide fixing system.
Locking pivot stability: The locking pivot ensures that the drawer remains completely fixed and level even when fully open, providing a safe user experience and preventing unwanted movement.
Compatibility with additional locking systems: These slides already have an integrated soft closing system, but can be supplemented with other automation systems if they are compatible with standard full extension slides.
Durability Guarantee: These slides are manufactured from high quality steel and finished in chrome, offering corrosion resistance and a guarantee of optimum performance even after years of frequent use. Specific warranty may vary by distributor.
It is important to ensure that the LED converter is compatible with the total power of the strip. For a safe installation, it is recommended to calculate the power consumption based on the 9.6W/m and add 20% extra capacity to the converter.
Yes, the LED strip can be cut every 3 LEDs. Cut only at the designated marks with insulated scissors and protect the exposed ends with suitable connectors or seal them to prevent short circuits.
The strip uses 3M™ 300LSE double-coated adhesive tape, which ensures strong and durable adhesion on clean, smooth surfaces. It is important to clean the surface with alcohol prior to installation for best results.
It is recommended not to exceed 5 metres per line without the use of signal amplification to avoid voltage drops that may affect the uniformity of brightness.
The IP20 rating is suitable for indoor use where it is not exposed to splashing water or excessive humidity. Ideal for furniture, shelving or indoor lighting.
If an LED light switches on and then switches off, it is because the converter is overheating.The most common reasons for the converter to overheat are a lack of ventilation in the place of installation or excessive power delivery.In this case the converter is providing all or more of the power that it can give and we will need to replace it with a more powerful converter.
The controller includes colour-coded wires to distinguish positive and negative. These are connected to the LED strips via AMP or Mini LED connectors and to the power supply via the included cables.
Yes, this controller is compatible with 12V and 24V LED strips, as long as the total power does not exceed the capacity of the power supply used.
The included cables have a length of 1.5 metres from the controller to the connection ends, facilitating installation in different configurations.
The controller is made of durable materials and its design includes overload and short-circuit protection, ensuring safe and prolonged use.
It uses AMP and Mini LED connectors, allowing fast and secure connection to compatible LED strips. These connectors are standard in LED lighting systems.
The choice of a system for fold-down doors using a steel cable, like Microwinch or Miniwinch, depends on the height and weight of the door. To do so, you simply need to follow these simple steps:1. Check the height and the weight of the door. 2. Once you have obtained the values, look up the selection table. Depending on the weight of the door, you will be able to choose one fold-down system or another. Also, the table will indicate the number of systems needed for said door (x 1 or x2).
If an LED light does not turn on it is because it needs more power than that provided by the converter or it may be due to a polarity problem.In this case lights connected to a direct current have to maintain polarity throughout the entire circuit (positive with positive and negative with negative).
The Sensor LED Dot Ø16 supports a maximum power of 36 W for 12V DC luminaires and 72 W for 24V DC luminaires. Several luminaires can be connected via a single converter.
The sensor is designed for recessed installation in furniture, with an installation diameter of 16 mm. It is easily fixed using the included 6-input AMP distributor, AMP connectors and screws.
In addition to switching the luminaires on and off with a short press, the sensor allows the light intensity to be dimmed with a long press. It also includes a memory function that saves the last intensity selected.
The sensor is made of plastic with an aluminium painted finish, providing wear resistance and a discreet, elegant design. The included 1.5m cable makes it easy to install in a variety of configurations.
This product complies with safety certifications such as IP44, CE, and RoHS, ensuring splash water resistance, electromagnetic compatibility, and compliance with environmental and safety regulations.
The Lynx Premium LED strip has an output of 9.6 W/m and a luminous efficacy of 94 lm/W. It provides a luminous flux of 910 lm/m, ideal for continuous lighting applications over long lengths.
It is powered by a 24V DC power supply and requires an LED converter (not included). Installation is simple thanks to the 15 cm cables soldered at both ends of the 10 m roll, making it easy to connect.
The strip is available in two colour temperatures: natural white (4,000 K) and warm white (2,700 K). It has an illumination angle of 120°, suitable for uniform and wide-range illumination.
It is dimmable and can be cut every 100 mm to suit different needs. This allows the length to be customised according to available space or specific applications.
It is manufactured with a double-layer PCB for durability and thermal efficiency. In addition, it includes a 3M® 300LSE adhesive tape, which ensures secure and stable attachment to a variety of surfaces.
The Lynx Premium LED strip has an output of 14.4 W/m, providing a high light output. It is designed for applications requiring powerful and uniform illumination.
It is available in three colour temperatures: cool white (6,000 K) ideal for work or commercial areas, natural white (4,000 K) for balanced and versatile environments, and warm white (3,000 K) for cosy or decorative environments.
The strip can be cut every 50 mm, allowing precise customisation according to the needs of the space. Each segment includes 3 LEDs arranged at a distance of 16.7 mm, ensuring uniform illumination along the entire length.
It is made of durable plastic, with a uniform thickness of 8 mm for easy handling and installation. The design exposes the LED spotlights, maximising their light output.
It offers an IP20 protection level, which makes it suitable for indoors and places protected from excessive dust. It is not suitable for wet areas or outdoors without additional protection measures.
In order to choose the correct converter or transformer for each light, it is necessary to:1. - Know the type of converter or transformer that corresponds to each light (12V DC, 350 mA or 12V AC). In our catalogue we indicate on each light the type of converter or transformer that must be used through a series of icons.2. - Know the total necessary power (6 W, 15 W, etc.). Once you have chosen the type of converter you have to choose the power that is required. For that purpose, it is necessary to add up all the powers of the lights that you are going to connect to the same converter.For example, you have 4 Orion lights (code 7048162) each 3 W, the total power is therefore 12 W. It is recommended that the converters work at 80% of the maximum power that they withstand. Therefore, we will choose the 15 W LED converter (code 7001420).Likewise, the maximum number of lights that can be connected to the same converter is 6 units, as the AMP distributors have 6 connectors.
Yes, the converters with metal casing need to be earthed and include a specific terminal for connection.
The Crux-in-Q LED spotlight has an output of 1.8 W and consists of 24 LEDs that provide natural white light at 4,000 K. It is efficient for furniture lighting applications thanks to its low energy consumption.
It is available in four finishes: white, black, aluminium and satin nickel. These finishes allow it to be easily integrated into different styles and designs of furniture, offering a versatile and elegant aesthetic.
The spotlight has dimensions of 65.5 mm x 65.5 mm and a thickness of 12.9 mm. Its compact square design makes it easy to install in built-in furniture. The visible cover is only 2 mm thick for a discreet and professional finish.
It operates with direct connection to AC 230V 50Hz, eliminating the need for an additional converter. This simplifies installation and reduces costs associated with additional electrical components.
The spotlight is IP20 rated, making it suitable for use indoors and in dry environments such as cabinets, shelves and other furniture where it is not exposed to excessive moisture or dust.
The Atom multiconnector features a Schuko F-type plug (EU) with a maximum power rating of 3,000 W - 13 A, two USB type A connectors with 5V DC output (1 x 2A and 1 x 1.5A), and an HDMI 2.0 connector. This allows a wide range of electrical and electronic devices to be connected.
The manual lift-off lid features a soft-close closure for safe and convenient access to the connectors. In addition, its design includes an LED power indicator for a clear display of the device's status.
It is installed by machining on surfaces of 113 x 116 mm. Brackets and screws are included in the scope of delivery, ensuring a firm fixation and easy mounting on desks or work tables.
The USB ports are ideal for charging mobile devices, tablets and other electronic equipment, while the HDMI 2.0 connector is suitable for connecting displays, projectors and other AV devices.
The multi-connector is made of a combination of plastic and aluminium with a black painted finish, providing resistance to wear and tear and a modern design that integrates perfectly into any office or home space.
No, they are isolated converters. Therefore, they do not need to be earthed.
The power tolerance should be -20% in power supplies. That is to say, if the total power of lights connected to a single converter is 12 W, it is necessary to use a 15 W converter. However, if the installation surpasses 12 W, it is necessary to choose a more powerful converter, for example 30 W.
The RGB remote control has 10 buttons that allow you to turn the lights on and off, adjust the light intensity, change colours and set up effects using a touch wheel for the colours. It also has an LED indicator that shows the commands in use.
The controller has a concave design with dimensions of 107 mm high, 59 mm wide and 9.2 mm thick, which improves its ergonomics and fit in the hand. Its white finish on the front and black on the back give it a modern and functional look.
It has a range of up to 20 metres and is suitable for RGB LED strips, allowing convenient and versatile wireless control in residential or commercial installations.
The package includes 1 remote control that can be connected to multiple LED strip controllers at the same time. It also includes the necessary items for immediate use.
The remote control complies with certifications such as UKCA and CE, guaranteeing safety, quality and compatibility with current European regulations.
The Lynx flat profile has a U-shaped design with dimensions of 20.2 mm horizontal width, 10.9 mm vertical height and 11.6 mm internal depth. It incorporates tabs and protrusions on the sides for easy installation and fastening of LED strips.
It is made of matt anodised aluminium, a material that combines lightness with high corrosion resistance. The anodised finish provides a modern and elegant appearance, ideal for decorative and functional applications.
The profile is available in two lengths: 2.35 metres and 3.9 metres, offering flexibility to suit projects of different sizes and configurations.
The LED strips are held in place by the profile's internal protrusions, which allow the strips to be held firmly in place, preventing displacement and facilitating their aesthetic integration.
This profile is ideal for recessed lighting projects in furniture, ceilings or walls, where a discreet and professional installation of LED strips is required, providing a clean and functional finish.
The Polaris LED spotlight offers a power of 1.2 W and emits natural white light with a colour temperature of 4,000 K. It provides efficient and pleasant lighting, suitable for work areas and decorative use.
The spotlight has a diameter of 30 mm in its recessed area, 12.5 mm deep and 33 mm visible diameter. It requires pre-machining for recessed installation in furniture or surfaces.
Its matt anodised aluminium construction provides corrosion resistance, durability and a modern design that blends in perfectly with different styles of furniture.
The spotlight illuminates an area range of 1.25 metres, making it ideal for applications in kitchens, bathrooms, showcases and work areas where spot and uniform illumination is required.
The package includes 6 units of LED spotlights, each with a 1.5 metre connection cable, plus the necessary components for mounting and installation. This makes it easy to use in projects that require multiple light points.
The Dimmer remote control allows you to control the ON/OFF of the LED lights, adjust the light intensity with dedicated buttons and choose precise brightness levels using a touch wheel.
It has an ergonomic design with a curved area that makes it easy to fit in the hands. Its compact dimensions of 107 mm high, 59 mm wide and 9.2 mm thick make it comfortable to handle.
The controller has a range of up to 20 metres, ideal for controlling compatible LED strips, especially those that support dimming.
It is made of plastic with white finish for the front and black for the back, offering a modern and contrasting design that enhances its aesthetics and functionality.
The package includes a remote control ready to be connected to LED strip controllers. Its wireless design ensures easy and versatile use in lighting installations.
The Point Motion Simple LED sensor detects the movement of a human body within its range and automatically switches on the connected LED lights. Once no motion is detected, the timer switches the lights off after 45 seconds.
It has a detection range of up to 1.5 metres and a 90° angle of coverage, making it ideal for applications in cabinets, drawers or any space where automatic illumination is required when motion is detected.
The built-in timer switches the lights off after 45 seconds without detecting motion, improving energy efficiency and reducing power consumption in environments with intermittent use.
The package includes 1 sensor, a 6-input AMP distributor, AMP connectors and fixing screws. Installation can be surface or flush mounted, depending on the needs of the furniture or space.
The sensor operates with 12V DC (36 W) and 24V DC (72 W) LED luminaires. This makes it compatible with a wide range of LED lighting systems, adapting to various configurations and environments.
The accessory for recessing in aluminium profile with curved diffuser improves the final finish of the mounting, providing a clean and aesthetic closure to the profile where the LED strips are installed.
The dimensions of the fitting are 12.7 mm high, 23 mm wide and 16.5 mm long overall. It is designed to fit perfectly into the 20 mm wide and 10 mm high profile channel.
It is made of grey plastic, which is strong, durable and easy to clean. This ensures good performance and a uniform appearance in the lighting system.
Installation is simple: the fitting is placed in the profile channel and the electrical connection cable of the LED strips is passed through it. Finally, the curved diffuser is press-fitted to complete the assembly.
The pack includes 20 units of the accessory, ideal for projects requiring aesthetic finishes on aluminium profiles with curved diffusers, such as furniture, showcases or decorative structures.
The "L" joint allows two LED strips to be connected at right angles, facilitating installations in corners or designs that require 90° turns. It is useful in furniture, display cabinets and structures where changes in lighting direction are required.
The junction supports 12V DC and 24V DC LED strips with a maximum power of 48W (12V) and 96W (24V), ensuring compatibility with a wide range of LED strips.
The dimensions of the junction are 8 mm thick in the run and 19 mm long in each direction, making it compact and suitable for 8 mm wide LED strips.
It is made of plastic for flexibility and durability. It includes an adhesive on the bottom to fix the connection firmly and avoid displacement during use.
The pack includes 10 units of L-shaped connectors with IP20 certification, making them dustproof. They are ideal for indoor LED lighting projects that require secure and aesthetically pleasing connections.
The Lynx Basic LED strip has an output of 9.6 W/m, an efficiency of 69 lumens per watt and a total of 120 LEDs per metre. These specifications ensure uniform and high quality illumination for decorative or functional applications.
The IP65 certification ensures that the LED strip is dust and splash water resistant, making it ideal for indoor applications and semi-covered areas such as kitchens, bathrooms or furniture that may be exposed to occasional moisture.
The LED strip can be cut at marked intervals, usually every 25 mm, to suit the desired length. Connections can be made using specific connectors for LED strips or by soldering wires to the exposed contact points, ensuring adequate insulation.
Cool white light (6000K) is ideal for environments where brighter and more functional lighting is desired, such as offices, kitchens or work areas. Warm white light (3000K) is more suitable for cosy environments, such as living rooms or bedrooms, where you want to create a relaxing atmosphere.
For installation, it is recommended to use the adhesive tape included on the back of the strip, which is suitable for smooth and clean surfaces. In case of textured or difficult to adhere surfaces, additional fixings such as clips or aluminium profiles can be used to ensure a firm installation.
Yes, it can be cut every 63 mm.It also shows cutting marks in one of the strip sides, since it has a more transparent area where the darker side shows the cutting areas.Since the strip has cables on the two sides, each strip has to be cut in 2 pieces, to have a cable on each side.If you need additional cuts, the waste can be used connecting the strip with the 8 mm Lynx Q or the Lynx H cable or by welding the strip.
The Neonlynx LED strip has an output of 7.6 W/m, an efficiency of 49 lumens per watt, and 126 LEDs per metre. These features provide uniform, high quality illumination, ideal for both decorative and functional applications.
The IP65 certification ensures that the LED strip is dust and water resistant, making it suitable for installations in wet locations such as bathrooms, kitchens or semi-covered areas. This ensures durability even under splashing conditions.
The strip can be cut at marked 63 mm intervals to suit the needs of the project. Cuts should be made with suitable tools to avoid damage, and connections can be made using the included miniLED connectors or soldering, ensuring proper insulation.
A 24V DC LED converter with sufficient capacity to handle the total power of the installed LED strip is recommended. For example, for a 3 metre roll (22.8 W), a converter that handles at least this power with an additional safety margin is required.
The strip is made of high quality silicone, which ensures colour temperature stability and resistance to humid environments. This flexible material also allows installations in curved or straight shapes, increasing the possibilities of design and durability.
This extension cable is suitable for connecting LED luminaires compatible with 12V DC and 24V DC systems. Its design ensures a stable electrical flow, maximising performance and preventing overloading of the connected luminaires.
To install the cable, connect the male MINILED connector end to the converter and the female end to the luminaire. Make sure that the connectors are tight and that the polarity is correct before switching on the system.
Yes, it is possible to extend more than 2 metres using additional cables. It is recommended to use good quality, secure connectors and to verify that the system can support the additional distance without loss of voltage or power.
MINILED connectors guarantee a firm and simple connection, preventing accidental disconnection. Each connector is polarised to ensure correct power transmission and avoid damage to the luminaires or the converter.
During installation, avoid excessive bending or mechanical stress on the cable. Be sure to keep it away from sources of heat and excessive humidity to ensure its durability and safety in the electrical system.
No, 24V Lynx strips are not compatible with 12V Lynx strip accessories.To make 24V Lynx strips work, it is necessary to have a 24V LED converter and SPECIAL 24v H cable including a Miniled connector, so the whole range can work with said connection.12 V Lynx sensors are not compatible either. They work at 12V, but can be used with most sensors in the Emuca catalogue admitting 24V or working at 230V AC.
The Lynx Premium LED strip has an output of 4.8 W/m, a luminous flux of 539 lm/m and an efficiency of 112 lm/W. These features ensure efficient and high quality lighting in interior spaces.
3M Adhesive Tape 300LSE provides a strong and durable hold, allowing the LED strip to adhere securely to smooth, clean surfaces, facilitating quick installation without the need for additional brackets.
The LED strip can be cut at the marked intervals of 3 LEDs. It is recommended to use sharp scissors or specific cutters for LED strips, making sure to cut on the indicated marks in order not to damage the circuits.
Thanks to its IP20 certification, this LED strip is ideal for indoor applications where there is no exposure to moisture or water, such as furniture, shelves, offices or work areas.
A 12V DC LED converter is required. To calculate its capacity, multiply the power of the strip (4.8 W/m) by the total length of the installation. For example, for a 5 metre strip, a converter is required to support at least 24 W, with an additional margin for safety.
Yes, it is totally compatible.Also, if they need a straight H joint of 8 mm (code 5061120), it may also be used because it is compatible with LED strip profiles and diffusers.
The Lynx H cable is compatible with 8mm LED strips thanks to its compact design and specific MINILED connectors. In addition, it supports 12V DC (up to 36W) and 24V DC (up to 72W) systems, offering versatility in different applications.
MINILED connectors provide a simple and secure connection by avoiding the need for soldering. Their design ensures a tight fit and prevents accidental disconnection during use.
The transparent finish of the connector minimises interference with the luminous flux, allowing discreet integration with LED strips and enhancing the aesthetics of the installation.
Yes, it is possible to use this cable in longer lengths by connecting it to other compatible cables. However, it is recommended to ensure that the additional length does not cause a significant voltage drop that will affect the performance of the LED strips.
During installation, the power supply must be disconnected and the correct polarity checked before making connections. In addition, avoid excessive bending of the cable or exposing it to mechanical stress to preserve its integrity.
The AMP extension cable is designed for 12V DC LED systems and supports a maximum power of 60W. It is ideal for connecting LED luminaires to the converter in installations requiring up to 2 metres of extension.
The AMP-type connection allows for quick and easy installation thanks to its connectors that ensure a firm and stable fit. It also minimises the risk of polarity errors, increasing the safety of the connection.
Although it is possible to extend the length using additional connectors, it should be verified that the extension does not cause a voltage drop that will affect the performance of the luminaires. It is recommended that cables of the same specification are used to maintain the integrity of the system.
The cable is made of flexible and resistant plastic with a black and red finish for easy identification of the poles. These materials ensure excellent durability and resistance to mechanical wear.
Before installation, disconnect the power supply and make sure that the positive and negative poles are correctly connected. Avoid straining the cable or exposing it to heat sources that could compromise its integrity.
You can calculate the maximum power if you know the supply voltage of the 24V LED Lynx strips (24V DC) and the maximum amperage admitted by the Lynx H 24V cable (they are 3A).We calculate it with the following formula: Power (W) = Voltage (V) x Amperage (A)Example: P(W)= 24V x 3A = 72W, with the maximum power it can connect with the Lynx H 24V cable is 72W at 24V DC.
The Lynx Basic LED strip is ideal for applications in furniture, shelving, work or decorative areas, where efficient and uniform illumination is needed. Its high efficiency makes it suitable for projects that require low energy consumption with excellent light quality.
Cool white light (6000K) is perfect for functional spaces such as kitchens or offices, natural white light (4500K) offers balanced lighting ideal for living or sleeping areas, while warm light (3000K) is suitable for creating cosy atmospheres, such as in bedrooms or living rooms.
Before installing the LED strip, it is recommended to clean the surface with a dry or slightly damp cloth to remove dust and grease. Make sure the surface is dry and smooth to maximise adhesion of the 3M tape.
Yes, it is possible to combine several rolls of LED strip by connecting them in series or in parallel. For this, compatible connectors must be used or the connection points must be soldered. Make sure that the LED converter has sufficient capacity to support the total combined power.
To maintain the performance of the LED strip, clean it regularly with a dry cloth and avoid exposing it to moisture or excessive heat. Periodically check electrical connections to ensure safe and efficient operation.
We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.
You can calculate the amperage of an installation if you know the feed voltage of 24 V LED Lynx (24V DC) and the power you wish to install.We calculate the data with the following formula: Amperage (A) = Power (W) / Voltage (V)Example: A= 72W / 24V = 3A, so the maximum power I can connect is 72W to 24V DC without exceeding the 3A admitted by 24V Lynx H cable.
The Lynx Premium LED Strip is suitable for both indoor and outdoor use thanks to its IP65 certification, which protects it against dust and splashes, and its slim 8mm design that makes it easy to install in tight spaces.
IP65 certification ensures that the strip is dust and moisture resistant, making it ideal for bathrooms, kitchens or semi-covered areas, guaranteeing long-lasting performance in these conditions.
To cut the LED strip, use sharp tools and cut at the indicated marks. When connecting segments, use specific connectors for LED strips or safe soldering, making sure to maintain correct polarity and protect the connections with adequate insulation.
When combining several LED strips, it is essential to calculate the total power and select a 12V DC converter that can handle the load. It is also recommended to check the continuity of the connections to ensure smooth operation.
To keep the LED strip in optimal condition, clean it with a dry cloth and avoid using abrasive products. Periodically inspect the electrical connections and ensure that the strip is installed on a clean and stable surface.
Within the available sensor range, you can opt for a Red Eye or Point 240 V AC sensor or a Dot, Point, Micron or Twelfy 12V/24V sensor.In the case of 12V/24V DC sensors, bear in mind they will need a set of 12V/24V DC sensor accessories to be easily and quickly connected. They may convert their connections from AMP to Miniled.
Warm light (3000K) creates a cosy and relaxing atmosphere, ideal for bedrooms or living rooms. Daylight (4000K) is versatile and suitable for balanced spaces such as offices or rest areas. Cool light (6000K) offers more brightness, ideal for kitchens, workshops or work areas.
Before installing the LED strip, clean the surface with a dry or slightly damp cloth to remove dust and grease. Make sure it is dry and smooth to maximise adhesion of the 3M tape.
Yes, it is possible to connect several LED strips in series or in parallel. However, the total power of the strips must be calculated and a 12V DC converter with sufficient capacity must be used to avoid overloading. It is also recommended to check the continuity of the connections.
To keep the LED strip in optimal condition, periodically wipe it with a dry cloth and avoid exposing it to moisture or excessive heat. Inspect electrical connections regularly to ensure safe operation.
The high efficiency of 124 lm/W makes it possible to illuminate large spaces with lower energy consumption, reducing electricity costs and providing uniform, high quality lighting. This is especially beneficial in projects with continuous use.
The minimum hole diameter to be made is 7 mm for the male Miniled connector to go through.If you have a female connector, the hole has to be 9 mm.
The following video shows how you can easily install the aforementioned LED lighting.
The integrated motion sensor detects motion within a range of 2 metres and at an angle of 120°. The luminaire automatically switches on when motion is detected and switches off after 30 seconds if no activity is detected.
The luminaire uses a rechargeable lithium polymer battery with a capacity of 850 mAh. The estimated charging time is 2 to 2.5 hours using a 5V DC 1A charger with micro USB type B connector.
The luminaire can be installed with screws on the surface of a piece of furniture or by means of an included adhesive magnet, allowing it to be easily removed for recharging. Both options are safe and practical.
The charge status LED indicates that the battery is charging when it is on. When the LED turns off, the battery is fully charged and ready for use.
This luminaire is ideal for transit areas such as corridors, wardrobes, laundry rooms or stairs, thanks to its compact design, natural white light (4000K) and motion sensor. Its simple installation and 360 cycles autonomy make it perfect for areas without direct access to electricity.
The multi-connector is installed by drilling a 100 mm diameter hole in the surface of the furniture. It is compatible with thicknesses between 1 and 70 mm. No additional tools are required, as the fixing is carried out by means of a manual nut included in the product.
The integration of Schuko sockets and USB ports in a single device allows charging various electronic devices and connecting household appliances without the need for additional adapters, optimising space and functionality.
The multi-connector is designed to efficiently distribute the total power (3680W for the plugs and up to 20W for the USB ports) in a safe way, avoiding overloads by means of an internal system that automatically regulates the electrical flow.
To keep the device in good condition, it is recommended to clean the surface regularly with a dry cloth and avoid using abrasive products. Periodically check the extraction system to ensure that it is working without obstructions.
The power strip is certified for electrical safety for 230V AC and IP20 protection, ensuring safe use in dry indoor environments. In addition, its design prevents overloading and ensures the protection of the connected devices.
The following video shows how you can easily install the aforementioned LED lighting.
The multi-connector includes:
2 Schuko-type sockets (max. 3000W, 13A) for household appliances and electronic equipment.
1 USB Type A and 1 USB Type C port for charging devices (max. 15W).
1 HDMI 2.0 connector for high-definition video transmission.
1 unshielded RJ45 port for standard Ethernet connections.
To install it, the cabinet must have a space of 225x111 mm and a maximum thickness of 36 mm. The multi-connector is fixed with brackets and screws included, and no additional tools are required for final adjustment.
The USB ports are compatible with devices such as smartphones, tablets and electronic accessories. Maximum charging capacity is 15W (5V/3A, 9V/2A, 12V/1.5A), enabling fast charging on compatible devices.
The auto-lift lid allows easy access to connectors and sockets with a simple touch. When not in use, the cover hides the ports to maintain a clean and tidy appearance.
The RJ45 connector is suitable for standard networks, but because it is not shielded, it is more susceptible to interference in environments with high electromagnetic emission. It is recommended for home or office use where interference is minimal.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily install the aforementioned LED lighting.
The Cassiopeia mirror's integrated anti-fogging system prevents condensation from forming on the surface, keeping it clean and functional even in bathrooms with high humidity after hot showers.
The decorative LED backlighting, with a colour temperature of 4000K, creates a warm and modern atmosphere, ideal for enhancing bathroom lighting without creating shadows and providing a sophisticated aesthetic design.
The mirror has a diameter of 60 cm and a thickness of 4 mm, making it a compact and stylish solution for bathrooms of any size, from residential to commercial.
The package includes the mirror, brackets, dowels, installation hooks and detailed instructions. A drill, levelling tool and screwdriver are recommended for installation.
This mirror is ideal for domestic bathrooms and hotels, thanks to its resistance to moisture and splashes (IP44), combined with an elegant design that adapts to modern and minimalist styles.
For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.
The Crux-in LED spotlight runs directly on AC 230V 50Hz, eliminating the need for a converter. This simplifies installation and makes it more efficient for furniture and interior spaces.
Its dimensions are 65 mm in diameter at the base, with a thickness of 11.5 mm and a 1.4 mm flange for discreet recessing. Its compact design ensures a stable installation and a professional finish.
The spotlight emits a cool white light of 6000K with a power of 1.8W and a luminous flux of 116 lm, providing a bright and suitable illumination for functional spaces such as kitchens, cupboards and offices.
The package includes 1 LED luminaire, installation screws and bracket. It is recommended to have a drill and screwdriver to fix the spotlight securely to the furniture.
This spotlight is ideal for applications in kitchen cabinets, cupboards, display cabinets and shelves, where functional lighting is needed. Its minimalist design and resistance (IP20) make it perfect for dry and protected interiors.
COB (Chip On Board) technology eliminates visible spots in the light, providing uniform and continuous illumination, ideal for applications where an aesthetic and homogeneous finish is required.
The Lynx Premium COB LED Strip requires a 24V DC converter for installation. This voltage ensures correct operation and efficient performance.
The LED strip can be cut every 55.5 mm, allowing precise customisation to suit the needs of each project, maximising material utilisation.
It is ideal for applications in built-in or surface furniture, especially in projects requiring continuous or curved lines, thanks to its flexibility and adaptability.
The strip is made of a double-layer PCB and 3M® 300LSE adhesive tape, which guarantees a strong and stable fixation on aluminium surfaces or other compatible materials.
Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.
The Lynx Z connector is compatible with LED strips operating at 12V DC or 24V DC, providing flexibility for different lighting applications.
Its small dimensions make it perfect for joining 8 mm wide LED strips, ensuring an unobtrusive and efficient installation.
The connector offers a solid and strong connection thanks to its metal connectors, designed to provide a secure and durable connection.
The transparent finish minimises the reduction of luminous flux, allowing uniform illumination without visible interference in the final design.
No additional tools are required to install the Lynx Z connector. The connection is made quickly and easily by aligning the LED strips and fitting them into the connector.
The Lynx Z LED cable supports a maximum power rating of 36W at 12V DC (3A) and 72W at 24V DC (3A), offering versatility for various lighting configurations.
The integrated MiniLED connector allows quick and secure connections without the need for additional tools, optimising installation time.
The transparent finish minimises the reduction of luminous flux, ensuring uniform illumination without visual interference.
This cable is compatible with 8mm wide LED strips, making it ideal for projects that use Lynx W profiles and require discreet and efficient connections.
It is important to ensure that the connections are correctly aligned and that the ends are securely snapped into the MiniLED connector to avoid disconnection or loss of electrical signal.
Yes, they are compatible with all the aluminium and diffuser profiles for LED strips.
You can calculate the maximum power if you know the supply voltage of the LED strips (12V DC) and the power that you want to install using the following formula: Amps (A) = Power (W) / Voltage (V)Example: A= 48W / 12Va A= 4AThe maximum power that I can connect is 48W at 12V DC.
No, it is only compatible for 8 mm wide LED strips
The Aries LED spotlight has dimensions of 300 mm in length, making it ideal for medium to large surfaces, fitting standard bathroom furniture and mirrors.
No, the Aries LED spotlight does not require an additional converter, as it operates directly on 230V AC power, simplifying installation.
The integrated opal diffuser homogenises the light, eliminating glare and shadows, ensuring uniform and pleasant illumination.
Mounting is by means of a multi-functional attachment which allows the spotlight to be fixed to glass, wood or boards using the included screws and IP44 connection box.
Yes, although the Aries spotlight is designed to be durable, it is possible to purchase compatible accessories and components in case of damage or wear and tear.
The LED Lynx strip with a variable colour temperature has a controller that makes it possible to select a colour temperature of cool white, natural white or warm white, in a range between 3,000 Kelvin and 6,000 Kelvin.
With this table you can calculate the total power of an LED strip.
The integrated motion sensor in the Kaus LED wall light has a detection range of 2 metres and an angle of 120°, allowing the luminaire to switch on automatically when it detects movement.
The rechargeable battery has a capacity of 850mAh, providing a battery life of up to 400 power-on cycles of 18 seconds each. It is recharged via a micro USB Type-C cable (included), with a charging time of approximately 2 hours using a 5V DC 1A charger (not included).
Yes, the Kaus LED wall light allows you to adjust the colour temperature between 3000K, 4000K and 6000K, with a simple touch of the sensor button to switch between the available options.
The Kaus LED wall light does not require screws, as it is easily installed with the included adhesive metal bases. This allows a magnetic fixation that facilitates both installation and removal for recharging.
The wall light's twilight sensor is activated when the ambient light is below 250 Lux, ensuring that the luminaire is only switched on when it is really needed, thus optimising battery consumption.
The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.
The proximity touch sensor integrated in the Kaus LED wall light switches the luminaire on when it detects movement at a distance of 7 cm. To switch it off, simply wave your hand in front of the sensor again.
The rechargeable battery has a capacity of 850mAh, offering a battery life of up to 400 power-on cycles of 20 seconds each. Charging time is approximately 2 hours using a conventional 5V DC 1A mobile phone charger (not included) and a micro USB type C cable (included).
Yes, the wall light allows you to adjust the colour temperature between 3000K, 4000K and 6000K with a touch of the touch sensor. This allows it to adapt to different lighting needs.
The package includes a rechargeable LED wall light, as well as adhesive metal bases and screws for optional mounting. It is easily installed by attaching it to metal surfaces or using the included adhesive tapes, without the need for additional tools.
The proximity sensor has a detection range of 7 cm and automatically switches off after detecting a second movement, optimising battery usage and ensuring efficient power consumption.
The Rigel LED luminaire's vibration sensor is automatically activated when the drawer is opened by detecting movement, and switches off after 12 seconds without detecting additional vibrations.
The rechargeable lithium polymer battery has a capacity of 850mAh, offering an autonomy of 600 power cycles per full charge. Charging time is approximately 2 hours using a 5V DC 0.5A USB charger and the included micro USB type B cable.
The luminaire can be installed in two ways:
With screws, for fixed mounting inside the drawer.
With double-sided adhesive tape or adhesive magnet, allowing tool-free mounting and easy removal for recharging.
Included in the package: a rechargeable LED luminaire, screws, adhesive magnet and double-sided adhesive tape. These options ensure quick and easy mounting without the need for additional tools.
No, this luminaire is designed for dry areas and is ideal for drawer or cabinet interiors. Its IP20 rating does not make it suitable for wet or outdoor environments.
The following video shows how you can easily install the aforementioned hinge.
The choice of a system for Agile lifting doors depends on the height and the weight of the furniture door. To do so, you simply need to follow these simple steps:
1. Check the height and weight of the furniture door.
2. Once you have obtained the values you need to calculate the strength of the spring, S = H * (W + 2 * Wh), in terms of: H = Height of the door in mm. W = Weight of the door in kg. Wh = Weight of the handle in kg. You can choose the lifting system according to what interval the strength of spring S falls under. The LOW interval is between 580 and 1,250, MEDIUM between 960 and 2,040, HIGH between 1,800 and 3,500, and EXTRA HIGH 3,200 y 9,000.
For example, we have a door with a height of 400 mm and a weight of 5 kg, with a handle that weighs 0.22 kg. The strength of the spring would be S = 400 * (5 + 2 * 0.22) = 2,176. Therefore, we would choose the HIGH strength range because it is in the interval of 1,800 to 3,500.
Yes, they are compatible. But, it is necessary to bear in mind that the Lynx sensors have different dimensions.In the case of the Motion sensor, the position of the lens has been changed but the dimensions have been maintained. When it comes to machining the diffuser it is necessary to bear in mind that the lens protrudes from it, the diameter of 10 mm is maintained but the position changes to 15 mm.In the case of the Touch and Dimmer sensors, there are no changes that affect assemble and the new Lynx sensor can be mounted where the previous sensor was mounted.
Installation dimensions: The switches are designed to be recessed in a 21 mm diameter and 21 mm deep hole to ensure a precise fit.
Materials of construction: The switches are made of durable plastic and are available in white, black or grey finishes, ideal for matching different styles of furniture.
Electrical capacity: Each switch can handle up to 10A at 125VAC or 250VAC, making them suitable for energy efficient luminaires and domestic or office electrical systems.
Compatibility: Yes, the switches are compatible with home or office furniture, being discreetly integrated into surfaces such as wood, plastic or similar.
Package contents: The batch includes 10 switches of the same finish and specifications. Ideal for series installations or multiple furniture projects.
The following video shows how you can easily install the aforementioned LED lighting.
The Airtop 2 Charger is compatible with all devices that support Qi wireless charging technology, such as Qi-enabled smartphones and headsets.
The charger requires a machining of D. 60 mm for installation on a flat surface, ideal for workbenches or office furniture.
Yes, the charger allows you to charge one device via the wireless cradle and another device connected to the USB Type A port simultaneously.
The charger features overheating and overcharging protection to ensure safe use while charging electronic devices.
The included power cable has a length of 1.8 metres, providing enough reach to connect the charger to a nearby power outlet.
The integrated motion sensor has a detection range of 2 metres and an angle of 120°. The luminaire automatically switches off 18 seconds after motion is no longer detected.
The 850mAh lithium polymer battery fully recharges in less than 2 hours using a 5V DC 1A USB charger (not included).
No, the luminaire does not allow the light intensity to be adjusted manually, but the twilight sensor ensures that the luminaire switches on only when the ambient light is insufficient.
The wall light is compatible with adhesive metal surfaces or with screws in materials such as wood or glass. The magnetic system facilitates installation and removal.
The battery has an estimated autonomy of 400 on/off cycles per full charge, and its lifetime depends on usage and charging conditions.
The touch sensor for LED strips has a detector that reacts when a human hand approaches it.The light will switch on when the sensor detects a human hand within an area of 0 to 2 mm and it will switch off when it detects it again.The sensor self-calibrates using potential difference, that is to say, its takes into account the objects and the distance between the hand and the sensor the first time it is turned on.If you want to change it, you need to reset the sensor. To do that, you need to disconnect the touch sensor from the electrical network (by disconnecting the sensor from the converter from the network or the power control switch of the residence), wait for 5 seconds and connect it again so that the sensor auto calibrates.
The proximity touch sensor is activated when you pass your hand over a distance of 7 cm, switching the luminaire on. If you swipe your hand again, it switches off automatically.
The 850mAh rechargeable lithium polymer battery has a battery life of approximately 400 on/off cycles per full charge.
The wall light can be easily attached to metal surfaces using the included magnetic adhesive bases. It can also be installed using screws for greater stability on non-metallic materials.
Yes, the luminaire allows manual adjustment of the colour temperature between 3000K, 4000K and 6000K by pressing the dedicated button.
The applique is recharged using a 5V DC 1A USB charger (not included) and a 30cm micro USB Type C cable (included). Full charge time is less than 2 hours.
When this happens, it is necessary to bear in mind that the controller switches on the output switch when it detects the movement of a human body.That is to say, the controller does not detect the movements of objects, for example the movement of a door.Also, in order for it to detect movement, it is necessary to cut across its detection range. The MOTION sensor has a detection range of 2 metres and an angle of 90º.
Yes, the luminaire is adjustable in length between 462 and 468 mm thanks to the lateral brackets, allowing it to be adapted to the width of the drawer or cabinet.
The integrated proximity sensor allows the luminaire to switch on automatically when the drawer is opened and off when the drawer is closed, improving convenience and energy savings.
No, the 500 mm cable entry profile is specifically designed to be installed at the rear of the drawer, ensuring that it does not interfere with the movement of the drawer.
The luminaire is mainly made of matt anodised aluminium and plastic, guaranteeing durability and a modern design.
The luminaire has an IP20 protection rating, making it ideal for installation in dry interior spaces such as cupboards or drawers.
The Quasar LED luminaire has a fixed colour temperature of 4,000 K, ideal for creating a relaxing and comfortable atmosphere.
The swivelling spotlight is controlled by an integrated touch switch with two modes: a short press for ambient light and a long press to activate the reading spotlight.
The installation of the bracket on the headboard of the bed is simple, as it only requires fixing with screws (included in the package) and the necessary wiring.
Yes, a 12V DC LED converter is required for operation, which is not included in the scope of delivery.
The luminaire is made of anodised aluminium and high quality plastic, which guarantees strength and durability.
The Algol flexible LED spotlight emits a natural white light with a colour temperature of 4,000 K, ideal for providing a relaxing and comfortable reading environment.
The USB port (5V DC - 1A Max) allows you to charge electronic devices such as mobile phones, tablets or e-readers while using the luminaire.
Installation is simple and is done by attaching the bracket to the headboard with the included screws. The spotlight can be easily adjusted to the desired location thanks to its flexibility.
Yes, a 12V DC LED converter is required for operation, which is not included in the package.
The spotlight is made of black textured plastic, which gives it a modern appearance and a flexible design for easy orientation.
The Neonlynx LED strip is 6mm wide by 6mm deep, allowing it to be integrated into furniture recesses. It is available in 1m, 3m and 5m lengths, with a flexible design that allows for curved or straight shapes.
Yes, thanks to its IP65 protection rating, the strip is waterproof and suitable for installation in damp or outdoor locations.
It requires a 24V DC power supply, for which an LED converter is necessary, which is not included in the scope of delivery.
The Neonlynx LED strip has an efficiency of 87 lm/W, emits a luminous flux of 210 lumens per metre, and has an output of 7.2 W/m.
It is connected via 1.5 m power cables pre-installed at both ends. The strip includes fixing jumpers for panel mounting and requires no soldering due to its optimised design.
The following video shows how you can easily install the aforementioned LED lighting.
The Neonlynx H LED strip uses high quality silicone, which maintains light uniformity, protects against moisture and helps control colour temperature variation.
It can be cut every 33.5 mm, which allows great versatility to adjust it to any size required in the installation.
It offers a natural white colour temperature (4,000 K) with an illumination angle of 120°. Its illumination is uniform and without visible spots.
No additional connectors are included, but the strip has 1.5m power cables at both ends for easy connection.
Yes, it is compatible with dimmer systems, optimising energy consumption according to the user's needs.
The Plugy USB connector requires a 25 mm diameter machining in the cabinet for proper installation.
USB Type A and Type C ports allow you to charge electronic devices such as phones, tablets and other devices compatible with Fast Charge 3.0, with a maximum power output of up to 20W.
Yes, it is compatible with 24V DC power systems. Requires a 24V DC to 36W or 30W converter, depending on the configuration installed.
No, the power adapter required for operation is not included in the package and must be purchased separately.
It is available in black painted plastic and painted aluminium finishes, offering high wear resistance and a modern design for different furniture styles.
In order to control the RGB LED strip you need an RGB controller with a radio frequency remote control. If in the facility there are two controllers they can both be controlled with a single remote as all the controllers have the same frequency.
In order to choose the correct converted for an LED strip it is necessary to:
- Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons.
- Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation.
For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip:
X= (2m x 24W) / 5m = 9,6W
Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.
Lynx Premium COB LED strip provides uniform illumination with no visible LED spots, ideal for creating continuous lines of light in decorative and functional applications.
The strip requires a 12V DC LED converter for operation, as it is not included in the scope of delivery.
The LED strip can be cut into segments every 25 mm, making it easy to customise according to the available space and installation.
It is available in colour temperatures of 6,000K (cool white) and 2,700K (warm white), allowing it to adapt to different environments.
It is manufactured on a double-layer PCB and equipped with 3M® 300LSE adhesive tape, which guarantees excellent adhesion to different surfaces and high durability.
The Lynx Q LED cable supports a maximum load capacity of 12V DC - 3A (36W Max) and 24V DC - 3A (72W Max) and is compatible with MiniLED connections.
This cable is designed with reduced dimensions to join 8 mm wide LED strips, ensuring a perfect fit and functionality.
Its length is 1.5 m, which facilitates installation in different configurations, providing flexibility in lighting projects.
The built-in connector allows for quick, easy and secure connection, reducing installation time and eliminating the need for additional tools.
Yes, Lynx Q cable is fully compatible with Lynx W profiles and similar LED lighting systems, ensuring versatility in projects.
This converter has a maximum power of 60W with 12V DC output, distributed among its 6 MiniLED outputs, allowing multiple LED devices to be connected simultaneously.
The converter is designed with IP20 protection, ideal for dry areas, and features an efficient power factor that optimises energy consumption in lighting projects.
It is compatible with Type C plugs and IEC 60320 C7 connectors, offering flexibility in connection via its 2 metre power cable. It also allows other cables for different plugs to be connected.
With compact dimensions of only 16.5 mm thick, the converter can be easily concealed in narrow areas or behind furniture, maximising the available space.
It incorporates protection against overloads, electrical interference and short circuits, ensuring safe and stable operation, even in heavy use scenarios.
The sensor uses infrared technology with a detection range of 5 cm, offering precise, non-contact activation.
It is ideal for applications in panels, headboards, kitchen furniture and different rooms in the home, thanks to its versatile and compact design.
Installation requires a Ø8 mm drill hole in the surface of the material. Includes a 2.5 m cable and a 6-input MiniLED distributor for easy mounting.
Supports 12V DC and 24V DC voltages, with a maximum power of 36W or 72W, depending on the connected LED system.
It is protected against electrical and electromagnetic interference, ensuring stable operation even in environments with high levels of electrical noise.
The following video shows how you can easily assemble the Agile system.
The sensor dims with a short press to switch the luminaires on/off and a long press to adjust the light level.
Installation requires a Ø12 mm drill hole in the furniture. Includes a 1.5 m cable and a 6-input MiniLED distributor.
It supports 12V DC and 24V DC voltages, with maximum power ratings of 36W for 12V and 72W for 24V.
Yes, the sensor has a memory function that saves the last set intensity after switching it off.
It is ideal for panels, headboards and furniture in general, integrating perfectly in different rooms of the home.
The sensor requires an installation diameter of 14 mm to be recessed in the furniture.
Yes, it includes a blue LED light that makes it easy to locate the sensor in the dark.
12V DC or 24V DC luminaires can be connected, with maximum wattages of 36W (12V) and 72W (24V).
Dimming is activated by a short press to switch on/off and a long press to adjust the light level.
The sensor complies with IP44 protection measures and is designed for low power consumption, ensuring safety and efficiency.
The sensor is compatible with 8mm wide LED strips operating at 12V DC or 24V DC.
The control is done by a short press to switch on/off and a long press to adjust the light intensity level.
Yes, it includes a mechanical switch to turn the blue LED beacon on or off if you do not want it to be active.
The sensor is designed for 8 mm wide LED strips, ideal for integration into Lynx W profiles.
The integrated connector allows a fast, safe and efficient connection, facilitating the installation of LED strips.
The sensor automatically switches the light on when it detects movement of a human body within its detection range and switches it off after 30 seconds without detection.
Detects motion in a range adjusted to human movement, ideal for profile and furniture applications.
The light remains on for 30 seconds after motion detection ceases.
It is compatible with 8 mm wide LED strips for both 12V DC and 24V DC systems.
Includes a motion sensor, a MINILED distributor with 6 inputs, screws and a 1.5 m cable with Miniled connection.
The distributor cable allows up to 6 LED luminaires to be connected and managed simultaneously via a single 12V or 24V sensor.
It uses a Miniled connection, ideal for LED lighting systems compatible with this type of connection.
Yes, it is fully compatible with Miniled sensors operating on 12V DC and 24V DC.
The cable is 10 cm long, making it easy to connect several luminaires to a single sensor output.
The kit includes 1 distribution cable with 6 outlets and 1 inlet with Miniled connection, made of plastic with black finish.
Yes, the Pyxis luminaire can be cut and connected to each LED individually, allowing it to be adjusted to the length required for the project.
Requires pre-machining to embed it into the surface of the furniture, ensuring aesthetic and functional integration.
No, the LED converter is not included in the scope of delivery, but is necessary for operation (24V DC).
The luminaire includes 1 LED luminaire, 4 mounting clips, a 1.5 m cable with Miniled connection and a cover cap.
The Miniled connection cable has a length of 1.5 metres, ideal for easy installation.
The kit includes a cable with side cover, a 1.5 metre Miniled connector, a single cover cap and 3 mounting clips.
Yes, this kit is designed to be compatible with the Pyxis luminaire by cutting and adjusting its length according to the needs of the project.
The side cover with Miniled connector allows a quick and safe connection to the 24V DC converter, facilitating the mounting and integration of the luminaire.
Yes, the kit includes mounting clips and all necessary accessories to complete the installation.
The accessories are made of durable plastic, available in black or grey finishes to match the design of the space.
The SMART 6W LED Converter is designed for energy efficiency and high power factor. It operates with an input of 220-240V AC (50-60Hz) and generates an output of 12V DC, ideal for LED luminaires. In addition, it has a compact design with a reduced thickness of only 16.5mm.
This converter includes protection against overloads, short circuits and electromagnetic interference, ensuring stable, safe and compliant operation in accordance with European standards.
It has 6 Miniled outlets compatible with IEC 60320 C7 connection, allowing efficient and safe connection for multiple luminaires.
Yes, thanks to its compact and slim design, it is ideal for installation in back or hard-to-reach areas, such as under furniture or in concealed spaces.
Yes, this converter complies with European safety standards, ensuring protection against electrical interference and offering reliable operation for domestic or professional use.
The 15W SMART LED Converter has an input of 220-240V AC (50-60Hz) and output of 24V DC, which makes it ideal for LED luminaires with lower power requirements. In addition, its compact design with 16.5mm thickness sets it apart as it is suitable for narrow installation areas.
It has 6 Miniled outlets, designed to facilitate the efficient connection of multiple LED luminaires. Each output uses IEC 60320 C7 connectors, allowing a stable and secure connection.
Its Plug&Play design and its compatibility with centralised SMART sensors allow multiple luminaires to be easily connected and controlled. It is also ideal for both domestic and professional applications, adapting to different lighting configurations.
It integrates protection against overloads, overheating and short circuits in the secondary, complying with European safety standards to guarantee stable and safe operation in all its applications.
The power cable has a length of 2 metres, is equipped with a 90° angled Type C plug and an IEC 60320 C7 connector. This configuration optimises space and facilitates installation, even in hard-to-reach areas.
Yes, the Auriga Switch luminaire has a proximity sensor that acts as a switch, with the added bonus that it can connect up three other luminaires to be controlled by the same sensor.A total of 4 Auriga luminaires can be installed (1 Auriga Switch luminaire and 3 Auriga luminaires without a sensor).To this end, it features an input and an output cable, as well as an AMP connector. Moreover, it includes a soft light start and end function that creates an attractive, innovative effect.
The sensor has a detection range of 10 cm and is activated when the furniture doors are opened or closed. It is ideal for furniture with double doors, as it is installed in the centre and controls the lighting regardless of which of the doors is opened or closed.
It is compatible with 12V DC or 24V DC converters, supporting power ratings of 36W at 12V DC and 72W at 24V DC. It integrates with LED luminaires from Miniled systems.
No machining required. Can be mounted directly onto the surface of the furniture using the included double-sided adhesive accessory or screwed for a more permanent fixing.
It can be connected to a converter to manage up to 6 secondary luminaires with Miniled connection from a single sensor.
This sensor is ideal for wardrobes, dressing rooms and other furniture that require automatic switching on and off when opening or closing their doors, offering convenience and energy efficiency.
The sensor is activated by passing your hand in front of it, within a detection range of 6 cm. It allows the luminaire to be switched on and off, as well as adjusting the light intensity (dimmer mode) by a prolonged action.
This sensor supports up to 36W in 12V DC systems and 72W in 24V DC systems, making it ideal for a wide variety of applications with LED luminaires.
Yes, it is possible. Connected to a Smart converter, it can manage up to 6 secondary luminaires with Miniled connection, allowing all of them to be switched on and off at the same time.
No complex machining is required. Its compact design allows it to be recessed in the furniture, occupying a diameter of only 8 mm.
It is ideal for furniture in kitchens, wardrobes, dressing rooms and areas where simple LED lighting control with intensity adjustment is desired, offering convenience and energy efficiency.
The choice of a system for Agile One lifting doors depends on the height and the weight of the furniture door. To do so, you simply need to follow these simple steps:
1. Check the height and weight of the furniture door.
2. Once you have obtained the values you need to calculate the strength of the spring, S = H * (W + 2 * Wh), in terms of: H = Height of the door in mm. W = Weight of the door in kg. Wh = Weight of the handle in kg. You can choose the lifting system according to what interval the strength of spring S falls under. The MEDIUM interval is between 500 and 1,500, HIGH between 960 and 2,350.
For example, we have a door with a height of 400 mm and a weight of 5 kg, with a handle that weighs 0.22 kg. The strength of the spring would be S = 200 * (5 + 2 * 0.22) = 1,088. Therefore, we would choose the HIGH strength range because it is in the interval of 960 and 2,350.
This will depend on the power consumption of each connected LED luminaire, but in total should not exceed a maximum power of 200W.
Yes, this transformer is designed with an overheating, overload and short-circuit protection system to ensure safe operation.
The distributor has 6 outputs for quick and easy connection of LED luminaires via MINILED connectors.
Yes, the transformer is equipped with an interchangeable cable that allows you to connect a different type of cable depending on the plug required in the target market.
No, this transformer is designed for indoor use or dry areas (IP20). For wet areas, a transformer with a higher protection rating is required.
The sensor has a detection range of 1.5 metres in length with a coverage angle of 90°.
No, the timer automatically switches off the luminaire 45 seconds after no motion is detected and is not adjustable.
The sensor can be installed in Ø16 mm machining or screwed directly to the surface of the furniture using the included screws and accessories.
Yes, the sensor is compatible and works correctly with 12V DC and 24V DC LED converters, supporting up to a maximum power of 250W.
Yes, the sensor employs PIR technology, which provides high sensitivity and accuracy in detecting movement of a human body.
The Plugy USB connector is designed to be recessed into furniture, offering a discreet and functional solution for charging electronic devices such as smartphones and tablets.
It has two USB Type A ports with a combined output of up to 3.40A or 1.70A per port, with a total power of 30W.
For installation, a 25 mm diameter cut-out is required in the cabinet and a 12V DC and 30W constant voltage converter is required for operation.
It is ideal for charging a wide variety of electronic devices such as mobile phones, tablets and other USB-powered equipment.
The kit includes a USB connector with two type A ports, fixing screws and everything you need for easy installation.
To install the Spot LED spotlight it is necessary to drill an 8 mm diameter hole in the furniture.
This LED spotlight has a power of 0.3W and emits cool white light with a temperature of 6,000K, ideal for highlighting indoor or outdoor areas of furniture.
Yes, this spotlight requires a constant voltage LED converter for proper operation.
It is suitable for both indoor and outdoor furniture, integrating perfectly into modern furniture designs thanks to its chrome finish.
The package includes 1 small LED luminaire and a 0.5 m long cable for easy installation.
The Lynx Z LED L-junction is compatible with 8mm wide SMD, COB and SOB LED strips in both 12V DC and 24V DC.
This accessory allows LED strips to be connected at a 90° angle, offering solutions for corners or specific designs.
It supports up to 5A of current throughput, reaching power ratings of 60W in 12V DC systems and 120W in 24V DC systems.
It is made of transparent plastic, which avoids the generation of dark areas and improves the aesthetics of the assembly. In addition, it includes a metal lock that secures the connection and withstands high tensile forces without disconnecting.
The package contains 1 L-joint specifically designed for easy corner connections of LED lighting systems.
This fixture is compatible with 8mm wide SMD, COB and SOB LED strips, operating on 12V DC and 24V DC systems.
It allows different shapes with bending angles from 0° to 180°, facilitating its use in complex installations or corners.
The cable supports a current throughput of up to 5A, reaching power ratings of 60W at 12V DC and 120W at 24V DC.
It stands out for its metal lock, which secures the connection to prevent disconnection, and its transparent plastic construction, which eliminates areas of darkness. In addition, it has a 50 mm long cable with differentiated colours to identify polarities.
The package includes 1 x 50mm flexible Lynx Z LED cable, ready to be used for LED strip installation.
The I-connector is specifically designed to join 24V DC Pyxis LED luminaires, facilitating installation in linear configurations.
It allows the creation of longer luminaires by making use of surplus lengths of up to 5 metres.
Its self-sealing design and metal connectors ensure a solid and stable connection, preventing slippage within the profile and guaranteeing the passage of current from one luminaire to another.
It is made of transparent plastic and metal connectors. The transparent plastic maximises the luminous flux at the junction, while the metal connectors ensure efficient current transmission.
No, its transparent plastic construction means that the passage of light at the joints is not affected, guaranteeing uniform illumination.
Yes, the Crater light can be recharged with a mobile phone charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.The charging time will vary in accordance with the amperage of the charger, although it is recommended to use 5VDC 1A chargers, therefore the estimated charge time is 2 to 2.5 hours.
The L connector is ideal for applications that require creating 90° angled junctions with the Pyxis 24V DC LED luminaire, perfect for perimeter lighting or corner designs.
It is necessary to cut the profiles at 45° mitres to ensure a perfect fit at 90° joints.
Allows luminaires up to 5 metres in length to be connected, optimising installation in angled designs.
It is made of transparent plastic with metal connectors. The transparent plastic optimises the passage of light, while the metal connectors ensure efficient current transmission.
No, the transparent design of the connector allows a uniform luminous flux to be maintained at the corner joints, maximising aesthetics and functionality.
The sensor has a detection range of 6 cm, which allows it to be activated precisely when a hand is swiped or a door is opened, depending on the configuration.
Yes, the sensor is fully compatible with 12V DC and 24V DC LED systems, supporting maximum power ratings of 36W at 12V DC and 72W at 24V DC.
The sensor has a small sensor head (8 mm diameter) that can be easily embedded in the furniture by drilling a hole. It also includes all the necessary accessories for fixing.
Yes, it can be connected to a Smart converter with control port, allowing simultaneous switching on and off of all connected luminaires. In addition, it supports connection to the 6 Miniled ports of the converter for independent control of the luminaires.
The sensor is made of plastic with a black finish, providing durability and resistance. It also features low power consumption and protection against electrical and electromagnetic interference.
Yes, the Kuma light requires a more powerful converter as it has USB ports for recharging smartphones and tablets. If you wish to use those USB ports in order to recharge devices, the light's consumption will be greater.It is thus recommended to use at least a 30W converter, code. 7001320 for the use of a single light and a 50W converter code. 5008420 for the use of 2 lights.
The use of the side spacer is necessary when the enclosure door coincides with the location of the frame and can collide with it, especially in enclosures with sliding or hinged doors.
A compatible screwdriver is required to install the Ø4x25 mm and Ø4x40 mm screws, according to the mounting specifications. No additional tools are required.
The spacer is 25 mm thick, which is the necessary distance to avoid collisions between the frame and the side of the enclosure.
This spacer is designed exclusively for the Hack pull-out frame, guaranteeing optimum compatibility with its slides.
Multiple spacers can be installed in a single enclosure if multiple Hack racks are used. Each package includes the components required for the installation of a single spacer.
The maximum recommended load for trouser rods depends on the type of installation and frame support, but they generally support up to 5 kg per rod without compromising stability or deformation.
Cabinet modules must have a Hack compatible frame, with internal dimensions suitable for the correct positioning of the rods, and ensure that the fixing surface is flat and strong.
Cutting or modifying the rods is not recommended as it may compromise their structural integrity and coating. In case of adjustments, it is preferable to use solutions custom-designed by the manufacturer.
Plastic end caps reduce noise by preventing direct contact of the metal with the frame and ensure a smooth glide during frequent use of the system, enhancing the user experience.
Yes, the rods are compatible with additional accessories such as Hack System organiser trays and other elements designed to optimise space in wardrobes and dressing rooms.
The auxiliary tray measures 396x120x146 mm, providing a compact but efficient space for storing small garments, accessories or similar items.
The tray is easily mounted on the Hack pull-out frame and is fully compatible with other accessories such as the trouser rods, shoe rack and organiser drawer, creating a versatile modular system.
It is made of plastic with a semi-transparent finish, making it resistant to moisture, easy to clean and suitable for use in a variety of locations, such as the bathroom or dressing room.
Yes, the tray can be used as a stand-alone item. It is ideal as a toy holder in children's rooms, an organiser in bathrooms or even for storing cleaning products.
The tray is designed to support the typical weight of lightweight garments and accessories. Its design optimises weight distribution, ensuring stability when attached to the Hack frame.
The Hack side shoe rack incorporates concealed slides with partial pull-out and soft close systems, providing a smooth glide and avoiding bumps when closing.
The trays can be adjusted in horizontal or 90° inclined positions. Adjustment is made by means of a simple clamping mechanism included with the trays.
It is available in left or right hand mounting versions. Installation varies according to the model selected, but both include a set of specific guides and screws to facilitate assembly.
The shoe rack is designed to support the typical weight of footwear stored on the three tilting trays. Its design optimises efficient organisation and access to footwear in confined spaces.
Made from steel with a textured painted finish, the Hack side shoe rack is resistant to moisture and wear and tear, ensuring long-lasting use in wardrobes and dressing rooms.
Persei lighting is available in two different lengths of 395 mm and 595 mm, both in cool white or warm white colour temperatures. Cutting or tampering may result in the lighting not working.
The tray dividers are attached to the base by means of a magnetic strip, allowing them to be positioned and adjusted securely and flexibly according to the user's needs.
The tray has a width of 483 mm (M60) and includes dividers designed to fit perfectly into the space available in 600, 800 and 900 mm Hack modules. This optimises storage by creating dedicated compartments.
The tray is built to support common wardrobe loads such as clothing and accessories. It is recommended to be installed on the Hack frame to ensure correct weight distribution and prolong its life.
The dividers can be arranged both vertically and horizontally thanks to their modular design and the magnetic strip on the base. This allows specific configurations for storing items such as shoes, accessories or folded clothes.
Manufactured from steel with a textured painted finish, the tray offers high resistance to moisture and wear and tear, making it ideal for heavy duty applications in walk-in wardrobes and cupboards.
The organiser basket has an ideal capacity for storing garments and objects. Its specific dimensions are 350x240 mm, optimised to fit Hack racks.
Yes, the organiser basket is compatible with trays and racks from the Hack system, allowing for versatile and functional integration into wardrobes and dressing rooms.
It is made of fabric with a grey textile effect finish, which gives it strength and an elegant design, suitable for everyday use in dressing rooms and wardrobes.
It is recommended to clean the basket with a damp cloth to preserve the grey textile finish. Do not machine wash or tumble dry to avoid damage to the material.
The folding design of the basket saves space when not in use, making it easy to transport and store without compromising its functionality.
Yes, as the Volans light functions at 230V AC therefore it does not need any extra converter.
The frame has an adjustment range for cabinet interiors of 560 to 594 mm in the M60 module and 760 to 794 mm in the M90 module, with a minimum cabinet depth of 450 mm.
The shoe rack offers enough space to organise several pairs of shoes, optimising the interior of the wardrobe and allowing combinations with other accessories from the Hack system.
The frame is made of aluminium and plastic with a painted finish, while the shoe rack is made of steel with a textured finish, guaranteeing strength and an elegant design.
The soft closing system integrated in the slides ensures a controlled and silent sliding, preventing knocks and increasing the lifespan of the shoe rack.
The kit includes all the necessary components: 1 frame with guides, 1 wire shoe rack and 8 screws (Ø4x16mm). No additional tools are required for installation, making assembly easier.
The adjustment range of the frame makes it possible to adapt to enclosure widths between 560 mm and 594 mm for the 600 mm module. Installation accuracy is ensured by using the included fixing screws and adjusting the frame to the available space according to the side guides.
The wire crate is designed to support a maximum load of 20 kg. The frame structure, made of aluminium and high-strength plastic, distributes the weight evenly and ensures optimum performance even with intensive use.
The finish of the drawer and frame has a textured painted coating that offers high resistance to corrosion and wear, ideal for wet environments or constant use. This treatment protects the materials from scratches and ensures durability.
The assembly of the frame slides is carried out by fixing them to the furniture using screws Ø4x16 mm included in the kit. The slides have a soft closing system that facilitates alignment during assembly and ensures smooth opening and closing.
The sliding and soft closing system complies with European furniture quality standards, ensuring a minimum durability of 60,000 opening and closing cycles. This guarantees efficient performance and reduces noise in daily use.
The kit's frame allows an adjustment range of 560 mm to 594 mm, ensuring compatibility with 600 mm enclosure modules.
The organiser drawer has a maximum load capacity of 20 kg. The frame distributes the weight evenly thanks to its aluminium and reinforced plastic construction, preventing deformation and ensuring stability.
The drawer and frame finishes are painted with a textured coating that provides high resistance to wear, scratches and corrosion, as well as offering an aesthetic design suitable for different environments.
The frame slides are fixed to the furniture using the Ø4x16 mm screws included in the kit. They incorporate a soft-close system that facilitates precise adjustment during installation and ensures smooth and silent movement.
The frame guides meet European quality standards to withstand 60,000 opening and closing cycles, ensuring long life and optimum performance in frequently used applications.
The kit frame is adjustable to fit enclosure modules with an internal width of 560 mm to 594 mm, ideal for standard 600 mm modules.
The tray is made of steel with textured finishes, while the frame combines aluminium and reinforced plastic. These materials guarantee high wear resistance, structural stability and modern aesthetics.
The tray includes steel dividers that attach magnetically to its base, allowing custom configurations for vertical or horizontal organisation of garments and accessories. This makes it easy to adapt to different storage needs.
The frame slides feature a soft closing system that provides smooth, quiet and safe movement, protecting the stored items and ensuring comfortable and long-lasting use.
The kit includes a frame, a metal tray with dividers, a set of guides and the screws necessary for assembly. Installation is simple and is carried out by fixing the rails to the inside of the cabinet with the screws supplied.
Yes, it is possible to recharge the Kraz light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC.
The frame is adjustable to fit enclosure modules with an internal width of 560 mm to 594 mm, complying with 600 mm module standards.
The rods are made of aluminium with high-quality plastic finials, while the frame combines aluminium and textured plastic, ensuring durability, lightness and resistance to wear and tear.
The stability of the trouser rods is ensured by a design that allows them to fit firmly into the frame, preventing displacement during use.
The soft-close guide system provides a smooth and quiet glide, protecting garments and improving the wearing experience by avoiding jerky movements.
The kit includes an adjustable frame, seven trouser rods, a set of runners and the necessary screws. Assembly is simple, as all that is required is to fix the slides to the inside of the wardrobe and adjust the frame to the desired width.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 to 2.5 hrs.
This light has a range of 360 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2.5 hours.
The Style 10 handle has the following dimensions: 42 mm wide, 28 mm high and a length of 2.35 metres. It is made of matt anodised aluminium, which gives it lightness, strength and a highly durable aesthetic finish.
This model is specifically designed for 10 mm thick sliding doors. It is compatible with built-in or sliding wardrobe systems using similar profiles.
Installation requires basic tools such as an aluminium cut-off saw (in case of length adjustments), a drill for fastening, and a screwdriver or equivalent tool for assembly with appropriate hardware. Be sure to follow the instructions for the Placard sliding system for precise adjustment.
Yes, the handle can be cut to size using specialised aluminium tools, such as thin-cutting saws. Careful cutting is recommended to keep the edges smooth and to avoid damage to the anodised finish. Be sure to measure accurately before fitting.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Vall 19 handle is designed to be installed on 19 mm thick doors. It is essential that the surface is flat and compatible with the aluminium profile to ensure a stable fixing. It is recommended to check that the edges of the door are level and free of irregularities to avoid deviations during assembly.
The Vall 19 handle is available in lengths of 2.25 m and 2.7 m, with a front area of 35 mm wide and 35 mm total depth. It is made of aluminium with a matt anodised finish, which guarantees durability, corrosion resistance and a modern aesthetic that adapts to multiple styles of furniture.
For installation, a drill with aluminium-specific drill bits, a saw for cutting profiles (in case of length adjustment), a square for measuring precise angles and screws suitable for the enclosure material are required. It is crucial to use tools that do not damage the anodised finish.
The handle is manufactured under strict quality standards in anodised aluminium, complying with European standards of corrosion resistance and safety for furniture. In addition, its ergonomic design ensures comfortable use without sharp edges that could pose a risk.
Maintenance is minimal thanks to the matt anodised finish, which offers resistance to wear and tear. It is recommended to clean with a damp cloth and neutral detergents, avoiding abrasive products that may damage the anodising. To maintain its appearance, avoid contact with corrosive chemicals.
This profile is available in 2.35 m and 3 m lengths, with a total height of 16 mm and a thickness of 35 mm. It is compatible with 16 mm, 18 mm and 19 mm boards, making it suitable for a wide variety of sliding doors in Placard systems.
Installation requires tools such as a drill, a saw for precise cutting of the aluminium and a level to ensure a correct fit. It is important that the surface is clean and smooth before fixing the profile to ensure an optimal finish and to avoid possible deformations.
The matt anodised finish provides high corrosion resistance, a smooth feel and a modern look. It also minimises the appearance of fingerprints and scratches, ensuring long-lasting durability even under heavy use.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
To maintain its appearance and functionality, clean the profile regularly with a soft cloth and non-abrasive detergents. Avoid using acidic cleaners or chemicals that may damage the anodised finish. In case of dust accumulation, a soft bristle brush is recommended.
The Revalock child safety lock for doors and drawers is ideal for preserving child safety, as it prevents children from being able to open furniture. Among other things, it is very useful for installing in caravans or boats, ensuring they are locked.Its installation and functioning is very simple, a magnet (key) deactivates the lock and makes it open. It is also possible to block it, so it stops working and it is not necessary to have a key to open it. This is very useful when it is no longer necessary.
The Wave 16 handle is specifically designed for 16 mm thick boards. It is essential that the board is straight, without irregularities, and compatible with the profiles used in Placard 74 systems.
This handle is available in 2.35 m and 2.7 m lengths, in white painted, black painted and matt anodised finishes. These options offer flexibility to suit different furniture styles and designs.
The handle design includes an ergonomic grip function that makes it easy to open and close the doors. In addition, the robust construction enhances the durability of the system, especially in frequently used applications.
In Placard 74 systems, the Wave 16 handle does not require additional reinforcement if installed correctly on 16 mm boards. However, it must be ensured that the top and bottom profiles and carriages are correctly fixed to guarantee the stability of the system.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Quad 18 handle is designed for 18 mm thick boards, which ensures a precise and stable fit. It is recommended to check the board measurements prior to installation to ensure compatibility.
The Quad 18 handle has a length of 2.35 m and is made of aluminium with a matt anodised finish. This design combines durability with modern aesthetics, ideal for sliding door systems.
Installation is carried out by machining the top of the panel. It is fixed using standard tools and specific screws, ensuring a perfect fit in the corresponding guide system.
The matt anodised finish provides corrosion and wear resistance, as well as a uniform and elegant appearance. This makes it suitable for residential and industrial environments with frequent use.
To prolong the life of the handle, clean it with a soft cloth and neutral soapy water, avoiding abrasive products or tools that may scratch the anodised finish. Periodically inspect the fixing points to ensure that the handle remains secure and functional.
This handle is designed for 19 mm thick boards, ensuring a perfect fit and optimal sliding on Placard 74 sliding door systems.
The handle has a length of 2.25 m or 2.7 m, and is available in white painted, black painted and matt anodised finishes, offering options to match different styles of furniture.
Installation requires machining the edge of the board to fit the handle. It is fixed with screws suitable for the material, ensuring a firm and stable installation.
The design incorporates an ergonomic grip zone that makes it easier to open and close the doors. It also enhances the user experience by ensuring comfort and functionality.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The brake is designed to hold the door at the end of its travel, preventing sudden knocks and ensuring that it remains securely in place, protecting both the door and the furniture.
It is made of hard-wearing plastic with a grey finish, making it durable and able to withstand constant use, as well as being discreetly integrated into sliding door systems.
The brake is placed on the top or bottom rail, depending on the design of the system. Installation is simple and requires no specialised tools, ensuring that the door stops precisely at the desired point.
Yes, the Placard brake can be fitted to cabinets with two or three sliding doors. In three-leaf systems, it is fitted at the locking points to prevent the centre door from becoming loose or misaligned.
We can fit the soft closing device at the opening and a brake cod. 6102021 at the closing of the door. This prevents the central door from becoming loose when it is closed or open.
Our LED converters do not have the necessary characteristics to work together with dimmers in the primary voltage (110 ~ 240V AC, 50 ~ 60Hz).However, we do have devices that can regulate the intensity (dimmer) in the secondary voltage (12V-24V DC). These can be:- Lynx switch/dimmer (cod. 5203620). - Spirit switch/dimmer (cod. 5022617). - Micron switch/dimmer (cod. 5053125). - Dot switch/dimmer (cod. 50228).
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily install the the contemporary child safety lock, Revalock.
Yes, the Picard Classic bottom rail is fully compatible with other accessories in the Picard range, such as top tracks and sliding door runners. The compatibility of the system ensures efficient assembly and optimum operation of the assembly, providing smooth sliding and an integrated design.
The Picard Classic bottom rail has a length of 2.35 m, ideal for large cabinets. If it needs to be adjusted to custom sizes, it can be cut with tools suitable for aluminium, such as a non-ferrous metal disc saw. It is important to cut accurately to avoid distortions that affect the sliding of the doors.
The Picard Classic bottom rail is designed to be installed on the underside of standard thickness boards. It is recommended that a channel be machined into the 10 mm, 16 mm, 18 mm boards.
This track is designed for sliding wardrobe doors in two-leaf systems, allowing smooth and silent sliding. It is compatible with doors made of wood, MDF or aluminium, as long as they conform to the recommended channel and weight for optimum use.
The matt anodised finish provides resistance to corrosion, wear and scratches, ensuring greater durability even in wet or high-use environments. In addition, this finish ensures a modern and uniform aesthetic, ideal for high-end furniture applications.
The Placard U10x16 crossbar is used to provide greater stability and structural reinforcement to sliding door systems, allowing for smooth and safe sliding.
The crossbar has a length of 2.35 m, a profile of 10x16 mm and a thickness of 1.5 mm.
It is made of matt anodised or painted aluminium (black or white), guaranteeing resistance to wear and tear and a high quality finish.
Yes, the crossbar is compatible with Placard sliding door systems and other similar models using this type of reinforcement.
Yes, the transom can be cut with standard tools to fit the specific dimensions of the cabinet or door.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how the sliding wardrobe door system is assembled.
The profile is suitable for glass doors up to 2.35 metres long and 16 mm thick.
No, this profile is specifically designed for doors with a thickness of 16 mm, guaranteeing a perfect and secure fit.
The T24 profile is designed to provide top and bottom support for sliding glass doors, ensuring stability and smooth operation in the Placard 74 system.
The package includes a 2.35 m long matt anodised aluminium profile, ready for installation.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily install the aforementioned LED lighting.
The Placard trolley is made from a combination of high quality steel and plastic, ensuring strength, durability and a discreet design.
The trolley can carry a maximum load of up to 70 kg, making it suitable for large and heavy cabinets.
It is compatible with sliding wardrobe doors with a board thickness of 19 mm, adapting to the Emuca Placard system.
The installation of the trolley is simple and is carried out by fixing it to the upper and lower profile of the sliding door. It includes the necessary elements to ensure its correct fixing.
Yes, this trolley includes an anti-slip system that ensures smooth and safe movement during daily use.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Wave 16 and Wave 16 E handle profiles for sliding doors have the same design and the same geometry for 16 mm thick boards. The difference is that the Wave 16 E handle profile is thinner and therefore more economical.
The Wave 16 handle has a white painted or matt anodised finish, providing modern aesthetics and corrosion resistance.
The Wave 16 handle is installed by fixing it to the edge of the sliding door using the screws included in the packaging. Make sure that the profile is correctly aligned before screwing to ensure a perfect fit.
The 19mm Placard skid is suitable for cabinet sliding door systems using compatible rails, especially those designed for board thicknesses up to 19mm.
The Placard runner is installed by attaching it to the bottom profile of the sliding door system. It is necessary to insert it correctly into the rail track and ensure that it is correctly adjusted to ensure smooth movement.
The skate wheels are made of durable plastic with an additional coating that improves durability and reduces wear and tear during frequent use.
Frequent maintenance is not required. However, it is advisable to clean the wheels and rails periodically to remove dust and debris that may affect gliding.
The packaging includes 100 skates, each carefully packed to avoid damage during transport.
Yes, the Revalock safety locks have a template for the installation of each lock and an assembly instructions sheet for each packaging box.
The kit includes:
1 set of soft closing devices
Installation accessories
It is designed for sliding doors up to 30 kg, providing a controlled and quiet closing.
The system is compatible with wooden or glass sliding doors, provided they have a maximum weight of 30 kg and are designed for guide systems compatible with the Flow kit.
The kit is made of steel and high-strength plastic, guaranteeing durability and optimum performance over time.
The following video shows how the sliding wardrobe door system is assembled.
No, the mechanism is pre-configured to provide a soft and cushioned closing action, specifically designed for doors weighing up to 30 kg.
The rail is installed directly onto the enclosure surface by means of plastic clips, without the need for pre-machining, which facilitates fast and efficient assembly.
Yes, it is designed to be compatible with soft-close devices and Flow system brakes, providing safe and quiet sliding.
The track is designed for doors with a maximum weight of 50 kg and a thickness of up to 20 mm, making it ideal for large and robust doors.
Yes, the rail can be cut to size to suit specific enclosure configurations while maintaining functionality and aesthetics.
It is made of aluminium with a black painted or matt anodised finish, providing high durability, corrosion resistance and a modern aesthetic finish.
The bottom rail is designed to guide the doors supported at the bottom of the cabinet, while the top rail supports the doors at the top. Both use the same mounting system with plastic clips.
No, this model is designed for surface mounting only. If flush mounting is required, other Flow system specific options should be considered.
The rail is fixed by means of plastic clips that are screwed to the surface of the furniture, eliminating the need for pre-machining and facilitating installation.
Yes, the track is compatible with doors up to 20 mm thick, providing versatility for different cabinet designs.
Yes, it is designed to support doors with a maximum weight of 50 kg, guaranteeing stability and safe sliding.
The clips ensure stable fixing of Flow rails in surface mounting, eliminating the need to machine the boards and simplifying installation.
The clips are installed 28 mm from the front of the board to ensure precise alignment and a clean finish.
It is recommended to install 2 clips per cabinet if the rail length is less than 2 metres and 3 clips if the rail length exceeds 2 metres, ensuring additional stability.
The following video shows how you can easily install the aforementioned the Atom 14 multiconnector.
Yes, the packaging includes the necessary screws for fixing the clips, facilitating quick and complete assembly.
The clips are made of durable grey plastic, providing durability, light weight and a discreet finish that is hidden after installation.
The kit is designed to install wooden sliding doors with top runners, suitable for cabinets with 16 mm thick boards. It does not require pre-machining and is easily fixed using clips included in the kit. The top and bottom runners have a length of 2.35 metres, allowing them to be used in large wardrobes.
The system is designed to support doors weighing up to 30 kg each, ensuring smooth and safe operation. This makes it ideal for heavy duty enclosures in domestic or commercial environments.
The system includes a soft-close mechanism integrated into the carriages, which reduces the impact of closing the doors and improves the life of the slides. Matt anodised materials ensure corrosion resistance and a durable appearance.
The kit is designed for quick and easy installation without the need for specialised tools. Only a screwdriver is required to attach the clips and assemble the guides, making assembly easy for carpenters and distributors.
The Flow system includes components designed to ensure safe use, such as the carriages with cushioned locking and deformation-resistant slides. Although no specific certification is detailed in the data sheet, the materials and design meet the usual quality standards in the furniture industry.
The following video shows how you can easily install the aforementioned the Atom 26 multiconnector.
The Flow inverted soft close allows the closing of a sliding door to be cushioned, avoiding abrupt impacts and ensuring a smooth and silent movement, ideal for applications in domestic and professional environments.
Yes, this soft close is compatible with Flow 2 sliding systems for 30 kg and 50 kg doors, offering simple and effective integration with the corresponding top and bottom profiles.
Installation requires only a 2 mm hex spanner to attach the devices to the system, facilitating quick and uncomplicated assembly.
Yes, the system is designed to be installed symmetrically on both the right and left side, adapting to different sliding door configurations.
The soft close is made of high quality steel and plastic, ensuring wear resistance, durability and reliable performance in continuous use.
The system is compatible with doors up to 20 kg and 25 kg, with adjustable heights between 1200 mm and 2200 mm. The load capacity varies depending on the model selected (Push or Pull).
It is necessary to combine this kit with the push or pull system, vertical profiles, sliding rails and optional reinforcement or centring profiles to ensure a complete and functional assembly.
Yes, the system allows the doors to be concealed in lateral spaces of the unit or between walls, optimising the use of space and maintaining a clean and elegant aesthetic.
The system includes cup hinges with and without soft closing, glides, dampers and mounting hardware, ensuring smooth and quiet sliding.
Made of steel, aluminium and plastic, the system guarantees high durability, wear resistance and ease of installation thanks to pre-assembled components.
The system supports folding doors with loads of 20 kg and 25 kg per leaf. Compatible heights range from 1200 mm to 2700 mm, with panel thicknesses between 18 mm and 26 mm.
Yes, to be combined with the basic hardware kit, slide rails, vertical profile and, optionally, reinforcement profiles and centring strips.
No, the system uses a push-to-open mechanism, eliminating the need for handles. Opening is assisted and door adjustment is intuitive and accessible.
It includes pre-assembled components that speed up assembly, allowing for quick and precise installation. In addition, the system is designed to conceal the doors in the side of the cabinet or between walls.
Made of steel, aluminium and plastic, the system offers high strength, durability and a modern finish. Its design optimises the use of space while maintaining a clean aesthetic.
Kit includes: 2 side metal ribs and mounting hardware.
It is designed for easy integration with Simplex drawer systems.
The ribs are made of high-strength steel, available in white painted and anthracite grey finishes.
Both finishes guarantee durability, corrosion resistance and aesthetic design.
The system is designed for drawers with a height of 86 mm and multiple depths: 290 mm, 340 mm, 400 mm and 440 mm.
Compatible with full-extension slides and Simplex soft close systems.
Yes, installation is quick and easy. No special tools are required. Just assemble the ribs with the slides and fix them to the front of the drawer with the included screws.
The system supports up to 35 kg per drawer, ideal for residential and commercial applications.
The kit contains: 2 surface covers and 2 gear covers.
This set ensures a complete and aesthetic installation for the mechanism.
It is designed for surface mounting of the Uno mechanism, providing a clean and visible integration into the furniture design.
Yes, the kit is compatible with all models of the Uno mechanism, ensuring a precise and functional fit.
The covers are made of high-strength plastic, which provides durability, light weight and protection against shocks and impacts.
No, the kit includes all the necessary components for assembly and can be easily installed with standard hand tools such as a screwdriver.
Containers with bottom fixing and automatic extraction need to be larger than the width of the container. In other words, the joining and opening mechanism needs to occupy more space than the width of the container. Always make sure you measure the minimum size of the module and check the interior space.
The system includes two containers of 16 litres each, providing a total capacity of 32 litres, ideal for the separation of household waste.
The containers are made of sturdy plastic and stainless steel, which guarantees durability, easy cleaning and a modern design suitable for any kitchen.
Yes, the system is designed so that the containers open automatically when removed, facilitating access and daily use.
Yes, the system includes everything necessary for its installation: a frame with guides, screws and two containers with a common lid and base for its adjustment.
The container has a total capacity of 28 litres, distributed in two bins of 14 litres each, ideal for waste separation.
The kitchen module must have sufficient interior space for the system, with a manual pull-out in a 320 mm movement.
Yes, the system includes two 14-litre buckets, a common lid and a base for mounting, ensuring a perfect fit inside the cabinet.
The containers are made of durable grey plastic, guaranteeing durability and ease of cleaning.
Yes, this system is designed to be installed in hinged door modules and is suitable for kitchens with standard configuration.
The MAW (Maximum Allowable Weight) of the Gola profile system finishes depends on their correct installation and the components used, guaranteeing stability in standard kitchen furniture.
The Gola system is installed in kitchen units with top, bottom and vertical profiles. Be sure to follow the included assembly instructions to ensure proper alignment and a clean finish.
It is recommended to leave a gap of at least 2 mm between the door and the profile to ensure a smooth opening without chafing.
To integrate appliances with the Gola system, it is important to use the appropriate vertical and horizontal profiles, ensuring that they do not interfere with the dimensions of the appliance.
The PMA (Maximum Weight Allowance) of the Gola profile system finishes ensures stability and strength in kitchen furniture designed for standard use.
The Gola Top profile is installed by fitting and requires a 3 mm pre-milling of the board to fit perfectly. The manufacturer's instructions must also be followed to ensure correct fixing.
This profile is compatible with table tops with a thickness of 18 mm, ensuring perfect integration into modern kitchen furniture.
Yes, the design of the Gola Top Profile makes it ideal for kitchens with a minimalist style, thanks to its clean finish and unobtrusive integration into the furniture.
The following video shows how you can easily install the monochrome control with the LED light controller.
The central Gola profile is designed to be discreetly integrated into the central part of the kitchen units, offering a clean and modern look. Its main function is to allow convenient access to drawers and doors without the need for external handles.
The central Gola profile is made of aluminium with finishes such as white painted, matt anodised or gold anodised, ensuring strength and durability.
The central Gola profile has a length of 2.35 metres, ideal for fitting a wide variety of kitchen units.
The central Gola Profile design provides a modern, linear aesthetic, eliminating the need for external handles and facilitating cleaning by reducing edges and surfaces exposed to dust.
Accessories such as brackets, end caps and brackets are fully compatible with the Central Gola Profile, making installation easy and allowing for custom configurations.
The following video shows how you can easily install the CCT control with the LED light controller.
The central vertical curved Gola profile is designed for installation in handle-free kitchen fronts, especially in tall units and pantry cabinets. It provides convenient access and modern aesthetics by eliminating visible handles.
The profile has a standard length of 2.35 metres, although it can be cut to any desired length to suit the needs of the furniture.
The profile is made of high quality aluminium with a white painted finish, which guarantees durability and resistance to wear and tear.
Yes, the Gola profile can be cut to size using suitable tools, allowing it to be adapted to different furniture projects.
The packaging includes a central vertical curved Gola profile with protection against scratches or damage during transport.
The bracket with expansion screw is designed to secure the mounting of the Gola profile to the furniture module, providing a safe and strong system.
The following video shows how you can easily install the RGB control with the LED light controller.
The expansion screw allows the bracket to be firmly fixed to the profile and the module, ensuring a stable and reliable installation in different configurations.
Yes, this bracket is compatible with all Gola profile systems used in kitchen units and furniture.
The bracket is made of steel with a zinc-plated finish, ensuring durability and corrosion resistance.
The packaging includes 50 units of brackets with expansion screws, ready for installation in furniture projects.
Yes, you only need to press the MATCH button on the controller and the ON/OFF button on each remote to link it.
The Gola Top profile facilitates the opening of handle-free doors, providing a modern and minimalist aesthetic.
Yes, the Gola Top profile is designed to fit 16 mm and 19 mm thick boards, ensuring its versatility.
It is made of high quality aluminium with a white painted finish, guaranteeing durability and resistance.
The Gola Top profile has a length of 2.35 metres and an elongated design with an outer overhang of 18 mm.
The packaging includes a Gola Top profile, ideal for completing the Gola system in kitchen furniture.
Yes, just press the MATCH button on each controller and the 1,2,3 or 4 buttons on the controller to link it.
The Gola curved vertical side profile is designed to be integrated into handle-less kitchen fronts, optimising the opening of doors in pantry columns or cupboards.
The profile has a length of 2.35 metres and can be cut to size to suit different kitchen projects.
Yes, installation is simple, thanks to a direct anchoring method and sliders that facilitate assembly.
It is made of high quality aluminium, guaranteeing long-term durability and strength.
The Gola curved vertical side profile is available in white, black, anthracite, matt anodised, gold anodised and stainless steel anodised finishes.
Given that the unit load of each wheel is 70 kg, the complete Slip Ø100 4-wheel kit will withstand a weight of 280 kg.
One LED controller can be connected to 10 remote controls.
The Gola oven profile is specifically designed for kitchen units with built-in ovens, providing perfect integration between the appliance and the unit.
The profile has a length of 580 mm, ideal for covering the height of the oven in combination with the side profiles.
The product includes a Gola profile and screws to ensure quick and easy assembly.
It is made of high quality aluminium, which guarantees strength and durability in kitchen environments.
It is available in finishes such as anthracite grey, matt anodised and stainless steel anodised to match different kitchen styles.
One LED controller can be connected to 10 Wi-Fi modules.
One remote control can be linked to 20 LED controllers.
The kit includes 8 accessories for the Gola-R top profile, designed to ensure a perfect finish at the end of the furniture assembly.
One Wi-Fi module can be linked to 20 LED controllers.
These fittings are used for the ends of profiles, ensuring a precise fit and a clean finish on kitchen furniture.
No, the fittings are designed to be press-fitted, so no screws or tools are required for installation.
They are made of high-quality, resistant plastic, ensuring durability and impeccable aesthetics.
Yes, these accessories are compatible with all available Gola-R profile finishes, including matt white, black and matt anodised.
The kit includes 8 accessories specifically designed for the Gola-R central profile, guaranteeing a perfect finish at the ends of the furniture.
These accessories allow you to seal and finish off the ends of the Gola-R central profile, ensuring a clean and professional finish to your kitchen furniture.
The fittings are press-fitted without the need for screws or additional tools, making them quick and easy to assemble.
They are made of high quality, durable plastic, designed to provide durability and maintain impeccable aesthetics.
Yes, the accessories are compatible with all available Gola-R profile finishes, such as matt white, black and matt anodised.
The Wirly sensor must be connected after the converter because it is a sensor that works at 12V DC or 24V DC.
The Optima cutlery tray finishes are of high quality, with a design that ensures strength and durability, adapting to various kitchen styles.
Yes, the Optima cutlery tray is compatible with both Vantage-Q and Slim drawer systems, provided the module and size are compatible.
Optima cutlery trays are made of high-quality, resistant plastic, guaranteeing durability and ease of cleaning.
No, Optima cutlery trays are not designed to be cut, but are available in various sizes to fit different drawer sizes.
The modular design of the Optima cutlery tray allows you to reorganise kitchen utensils efficiently, maximising the space available inside the drawer.
The D.L. of the Optima cutlery tray finishes is of high quality, ensuring strength and durability for long-lasting use.
The Optima Vantage cutlery tray is available in sizes compatible with drawers 400 mm wide and 450 mm deep.
Yes, the Optima Vantage cutlery tray is made of durable plastic that has been treated to protect it from contact with moisture.
The design of the Optima Vantage cutlery tray allows for efficient organisation of kitchen utensils and tools, maximising the space available in the drawer.
To clean the Optima Vantage cutlery tray, simply use a damp cloth and mild detergent. It is recommended to dry it thoroughly after cleaning.
The anti-slip mat is a practical solution to protect the bottom of drawers from scratches, stains and debris build-up, keeping them in good condition at all times.
The mat prevents objects from shifting inside the drawer during opening and closing, reducing noise and ensuring stability for utensils and small objects.
Yes, the mat can be easily cut with scissors or a cutter to perfectly fit the dimensions of any drawer.
The surface has an anti-slip stippled design which ensures that objects are held in place, preventing unexpected movements.
The mat is made of high-quality, resistant plastic, which guarantees its durability against moisture and wear and tear from daily use.
The Optima Vantage cutlery tray is compatible with standard width module drawers of 600 mm and 900 mm, with a depth of 500 mm and 16 mm thick board.
Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.
It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.
Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.
The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.
The Optima Universal cutlery tray is compatible with drawer modules between 400 mm and 900 mm wide, with depths between 450 mm and 500 mm and board thicknesses between 16 mm and 19 mm.
Yes, the Optima Universal cutlery tray can be cut to fit depths between 449 mm and 482 mm and widths between 360 mm and 336 mm, allowing a customised installation according to the dimensions of the drawer.
The cutlery tray is made of high-quality grey plastic, which guarantees durability, strength and easy cleaning in daily use.
The cutlery tray has compartments designed to store knives, spoons, forks and other kitchen utensils, maximising the space inside the drawer.
The design of the Optima Universal cutlery tray allows for a precise fit inside the drawer, ensuring it stays in place even during frequent use.
The Optima Vantage cutlery tray is compatible with drawers of standard module widths of 600 mm and 900 mm, with a depth of 500 mm and a board thickness of 16 mm.
Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.
It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.
Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.
The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.
The set includes 2 x 2.35 m long plinth bars, 2 x 90 degree joints and 2 x flexible joints for customised installation.
The plinths are made of sturdy plastic with black or anodised finish, while the connecting fittings are made of highly durable plastic.
Yes, the skirtings can be easily cut to fit the specific measurements of your kitchen, ensuring a perfect fit.
This batch of skirtings is available in a height of 100 mm and a length of 2.35 m per bar, allowing for different design needs.
Installation is simple, using the included joint fittings. These ensure stable mounting, either in 90-degree corners or with the flexible joints for other configurations.
The Rhodes cabinet handle has a length of 2.3 metres, suitable for large cabinet doors.
The Rhodes handle is made from aluminium with a black painted or matt anodised finish, ensuring durability and a modern design.
Yes, the Rhodes handle can be installed both horizontally and vertically on 18 to 20 mm thick boards.
To install the Rhodes handle it is necessary to pre-machine 25x7 mm to embed the handle into the edge of the panel.
Yes, the handle includes the screws necessary for its assembly, facilitating installation in furniture.
The Jakarta furniture handle has a total length of 155 mm, which makes it suitable for various types of furniture.
The Jakarta handle is made of zamak, a corrosion-resistant and highly durable material, with a matt nickel finish.
The distance between the fixing holes is 128 mm, which makes it compatible with most standard furniture.
Yes, the matt nickel painted finish of the Jakarta handle is resistant to daily use and maintains its appearance over time.
Yes, the handle includes the screws necessary for its assembly, facilitating its installation on any piece of furniture.
The following video shows how the sliding door system for wardrobes is assembled.
In order to mount the sliders on doors it is possible to use different screw options, always bearing in mind the board thickness of the door:
- Euro screws. In this case it is necessary to machine a 5mm diameter hole into the door. For example, for a door thickness of 19 mm we will choose the code. 5044007 with a length of 17 mm.
- Self-tapping screws. They can have a 4mm diameter which do not require machining on the board. For example, for a board of 19 mm we will choose a 4 x 20 mm screw with the code. 8218605 or 5032405.
The Sedaví handle is made of zamak with an aluminium painted finish, offering strength, durability and a modern design.
The handle has a length of 137 mm and an interaxis of 128 mm, which makes it suitable for various types of furniture.
Yes, the Sedaví handle is ideal for kitchen, bathroom, office and other spaces, thanks to its functional and aesthetic design.
Yes, it includes the necessary M4 screws to facilitate immediate installation.
The handle can be installed in either horizontal or vertical orientation, adapting to the requirements of the furniture.
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
For the assembly of Free Face profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 30 mm and adhesive spacer cod. 4000820.
For the assembly ofFree Face 2 profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 23 mm.
The upper reinforced runner acts as a thread for the runners on the Space+ sliding door system. This profile offers greater resistance to torsion than the runner that is not reinforced, therefore it is ideal for large wardrobes with heavy doors that weigh up to 85 kg each.
The Prague handle is made of zamak, a strong and durable material that ensures a long service life.
The following video shows how the sliding door system for wardrobes is assembled.
The dimensions of the handle are 195 mm overall length and 160 mm spacing, ideal for standard sized furniture.
The handle finish is painted aluminium, offering a modern and elegant design that adapts to any style of furniture.
Yes, the handle includes M4 screws, which are necessary for quick and accurate installation.
The packaging contains 20 units of Prague handles, perfect for multiple installation projects.
For the assembly of the Free poor alongside the Space + sliding door system, it is necessary to choose an outside runner with a thickness of 30 mm.
For the assembly of Adige handle profiles for 18 mm board along with the Space + sliding doors, it is necessary to choose an outside runner with a thickness of 23 mm.
The L'Alcudia handle is made of aluminium, which gives it strength, durability and an elegant finish.
This handle has a length of 78 mm or 148 mm, depending on the model, and an interaxis of 50 mm.
Yes, this handle can be installed both horizontally and vertically, adapting to various furniture designs.
It is available in a matt anodised finish, giving it a modern and versatile look.
Yes, the product includes M4 mounting screws, which facilitates fast and secure installation.
The Castellón 160 handle is made of aluminium, which guarantees lightness, strength and durability.
The following video shows how the sliding door system for wardrobes is assembled.
The handle has a length of 172 mm and an interaxis of 160 mm, making it ideal for various types of furniture.
The design has a symmetrical and minimalist aesthetic, ideal for modern and elegant environments.
Yes, the handle includes M4 screws, allowing for quick and easy installation.
This model has an elegant chrome finish that gives it a shiny and aesthetic appearance.
The following video shows how the sliding door system for wardrobes is assembled.
The handles of the Torrent range are made of matt anodised aluminium, offering a modern design and high durability.
The dimensions of each handle are 120 mm in length, with an interaxis of 96 mm, suitable for multiple applications.
The set includes 10 handles and is available in matt anodised finish, ideal for kitchen, bathroom or office furniture.
M4 screws are included with each handle to ensure correct and easy installation.
Yes, the handles can be installed both horizontally and vertically, adapting to the needs of the furniture.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
Although the he adjustable, visible, hanging Neco sliding system allows for a maximum door thickness of 30 mm, the fittings and profiles of the Free aluminium door do not allow for the assembly of this sliding door system.
An adhesive felt is supplied with the Soft Neco soft closing system, it should be mounted on the actuator of the door, unless you have a handle that is in that zone.
Yes, you should always mount the adhesive felt on the actuator of the Soft Neco soft close door when the adjustable Neco sliding door system is used. In the un-adjustable system, it is not necessary to use it.
The Glasgow furniture handle is made from aluminium with a matt anodised finish, ensuring strength and durability, as well as a modern and attractive design.
Yes, the Glasgow handle is designed to be installed both horizontally and vertically, adapting to different styles and needs.
The Glasgow handle has a mounting hole spacing of 64 mm, which makes it easy to install on standard furniture.
The batch of 25 Glasgow handles includes M4 screws required for installation and each handle is individually packaged to prevent knocks and scratches.
The Glasgow handle is available in various lengths: 84 mm, 148 mm and 180 mm, to suit different sizes of furniture.
The Santiago furniture knob is made of zamak with a satin nickel finish, offering durability and a modern design.
The package includes a knob and the necessary M4 screws for installation.
Yes, the Santiago knob is ideal for kitchen, bathroom, home and office furniture, thanks to its versatile design.
Each knob is individually packed to avoid knocks and scratches during transport.
Yes, the Santiago knob is designed for installation on both drawer fronts and cabinet doors.
The Nairobi handle is made of zamak, a high quality and resistant material.
The following video shows how the sliding door system for wardrobes is assembled.
The handle has a bronze finish, ideal for rustic, classic or colonial styles.
The Nairobi handle has a length of 139 mm and a centre-to-centre distance of 96 mm.
The package includes 1 handle and the M4 screws required for installation.
Yes, each handle is individually packed to avoid knocks and scratches during transport.
Carriage sets are selected depending on the door weight.Two weight ranges, one for doors up to 40kg and one for doors from 40kg to 80kg, are available for soft-close systems.
The Tulip1 handle is made of aluminium with a matt anodised finish.
The following video shows how the sliding door system for wardrobes is assembled.
The handle is available in lengths of 126 mm and 158 mm.
No, this handle uses a high quality self-adhesive strip that requires no machining or screws.
It is compatible with drawer fronts and cabinet doors with a minimum thickness of 19 mm.
Yes, the included adhesive is of high quality, guaranteeing a secure and long-lasting attachment to the edge of the furniture.
The Chiva handle is made of aluminium with a matt anodised finish.
It is available in lengths of 62 mm, 94 mm, 126 mm and 158 mm.
No, this model includes a high quality self-adhesive strip that requires no machining or screws for installation.
It is suitable for drawer fronts and cabinet doors with a minimum thickness of 19 mm.
Yes, the high-quality adhesive guarantees a long-lasting and secure attachment to the edge of the furniture.
The handles are made of hollow stainless steel with a black painted finish, ensuring durability and a modern design.
Yes, the handles can be installed either horizontally or vertically, depending on the needs of the furniture.
The set includes 10 handles and the M4 screws required for installation.
Each handle has a length of 220 mm and an interaxis of 160 mm, adapting to different furniture designs.
The handles are individually packed to avoid scratches and to ensure their quality during transport.
The Burton knob is made of zamak, a strong and durable material ideal for use on furniture.
The Burton knob is finished in satin nickel, providing a modern and elegant look.
Yes, the knob includes M4 screws for easy installation.
The knob has a total length of 40 mm and an interaxle of 32 mm and is compatible with many furniture designs.
Each knob is individually packaged to prevent knocks, scratches and to ensure it arrives in perfect condition.
Yes, it is possible to cut the 80 feet. To do so, you need to cut the foot at the leveller part, once this part has been disassembled, and make the cut with a cutting disk/saw that is suitable.
The Panama knob has a diameter of 20 mm, ideal for furniture of different styles and sizes.
It is made of zamak with a chrome-plated finish, ensuring durability and elegant design.
Includes a 25 mm M4 screw, suitable for easy installation in various types of furniture.
Yes, this knob is perfect for use on kitchen, bathroom, home or office furniture.
Each knob is individually packed to avoid knocks and scratches during transport and storage.
The Budapest furniture knob has a diameter of 22 mm, ideal for compact and elegant furniture.
The knob is made of zamak with an antique gold finish for a classic and refined style.
The packaging includes a knob and an M4 screw for easy installation.
Yes, it is designed for use in kitchen, bathroom, home and office furniture, providing versatility in its application.
Each knob is individually packed to avoid knocks and scratches during transport and storage.
The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003.
The RAL code of the anthracite grey finish is approximately 7043.
The RAL code of the black finish is approximately 9011.
The Rize handle has a 160 mm spindle, ideal for kitchen, bathroom, home and office furniture.
The handle is made of zamak with a chrome finish, which offers a modern and corrosion-resistant design.
Yes, the handle can be installed in either horizontal or vertical orientation, depending on the furniture design.
The package includes M4 screws, suitable for doors with different standard thicknesses, ensuring a firm installation.
Each handle is individually packed to avoid knocks and scratches during transport and storage.
The Pasadena handle has a 180 mm spindle and a total length of 240 mm.
It is made of steel with a textured black finish, giving it durability and a sleek design.
Yes, it is necessary to drill holes on the outside of the door to attach the handle correctly. The design facilitates a comfortable and secure grip.
It is compatible with wooden doors between 35 and 45 mm thick, designed for sliding door systems.
The kit includes an exterior handle, mounting plate and screws, all individually packaged to prevent damage during transport.
The Wave 16 and Wave 16 E handle profiles for creating sliding doors have the same design and the same geometry for 16 mm thick board. The difference is that the Wave 16 E handle profile has a reduced thickness and is therefore more cost-effective.
The Argos knob has a diameter of 30 mm, which makes it ideal for furniture of different sizes.
It is made of aluminium, which guarantees excellent durability and resistance to daily use.
The knob is available in black, brass and gold painted finishes, adapting to different styles of furniture.
Assembly is simple, as it includes M4 screws that are fitted using a standard screwdriver.
The set includes 10 knobs and the screws required for installation, individually packaged to avoid scratches.
The following diagram shows the detail of the machining that you need to carry out on the table top of a table in order to fasten the plate of the 60 - 80 feet.
No, the clipping pressure is sufficient so as not to require the use of screws, just like with the other Hill 19, Vall 19 and Line 19 aluminium handle profiles for 19 mm thick boards.
We can put a smooth closing device on the opening and a code 6102021 brake on the door closure. This will make sure the central door is not loose when closed or open.
The following video shows how the sliding door system for wardrobes is assembled.
The maximum recommended tabletop that the board or table top with Hera feet should have is 900 x 900 mm.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The maximum recommended tabletop that the board or table top with Duplo feet should have is 1.500 x 900 mm.
The maximum diameter that a table top or surface of a table can have with a Stay 5 or Stay 6 leg in order to avoid it toppling over when we support ourselves on one end is:- 1,000 mm for the Stay 5 legs. - 1,200 mm for the Stay 6 legs.
The following video shows how you can easily assemble the Luxe supports.
The following video shows how you can easily assemble the Luxe supports.
According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.
The following video shows how you can easily assemble the Moka accessories.
The gap between the side of the module and the frame / rails of the Moka closet or dressing room interior accessories is 9mm.
Yes, you simply need to respect the minimum installation depth of the Moka runners and carry out the assembly with the clips that are supplied.
The following video shows how you can easily assemble the Hang Moka wardrobe lifts.
The side supplement of the Hang fold-down hanger is used to increase the distance between the hanger and the side of the unit, avoiding the arms of the hinges. Thanks to this supplement, you will be able to mount the Hang hanger fully integrated into your wardrobe with hinged doors.
Yes, the Moka trouser holder is available in two models, for assembly on either the right hand side or left hand side of the wardrobe, and to that end there are different codes. This completes the range of furnishing and storage options for your wardrobe or dressing room.
The following video shows how you can easily assemble the extractable shoe rack Moka.
The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.
According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how you can easily assemble the Vertex drawer.
According to the number of doors that comprise your wardrobe you can choose between different types of Free aluminium vertical profiles (A, B or C) to obtain different combinations of doors.
Type A. Central door used to create wardrobes with three doors. Created with two handle profiles.
Type B. Outer door used to create wardrobes with two or four doors. Created with a handle profile and a handle cover profile.
Type C. Inside door used to create wardrobes with two or four doors. Created with a vertical profile and a handle profile.
The calculation for adhesive tape that should be used to guarantee the correct fastening of the glass is defined by the size of the door designed. For this task we have a simple calculation table.
The double-sided adhesive table, Code. 6000215 is white acrylic foam tape that is 33x19mm with a thickness of 0.64mm. This tape has an acrylic adhesive that offers excellent adhesion to several finishes and plasticized vinyl. Likewise, it is resistant to solvents, extreme temperatures and UV rays, therefore it is recommended for several uses inside and outside.In the attached document, you can see details of the technical characteristics of the double-side adhesive tape, code. 6000215.
The following sketch shows details of the machining that should be carried out on aluminium doors for the Aluroller 2 sliding system.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 17 aluminium profiles.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 7 aluminium profiles.
The following video shows how you can easily to adjust the Vertex drawer.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The following video shows how you can easily to disassemble the Vertex drawer.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
All of the Shelvo racks for kitchen corner units are capable of supporting up to 20kg of weight.
The minimum door size for installing a half-moon Shelvo rack in a kitchen unit will depend on the diameter of rack chosen: - For racks of 650 mm diameter, the minimum door size is 400 mm. - For racks of 750mm diameter, the minimum door size is 450 mm.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The following video shows how you can easily assemble the Inox plate racks.
The distance between the rods of the dish draining rack is 18 mm.Each of the rods is 7 mm wide.
Yes, board size are the same for both drawers only the height of the back board changes in the 93mm-high version.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
Sut blinds can be adapted to different heights with a maximum height of 1500 mm. To do that, you simple need to cut the side rails and not fully unroll the blind. You need to bear in mind that the minimum gap for housing the blind box is 175 mm. However, the width of the Sut blind cannot be modified or cut, as this affects the pulling in mechanism of the blind.
The RAL code of the white finish of the Optima cutlery holder is approximately 9003.
The RAL code of the grey finish of the Optima cutlery holder is approximately 7001.
The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.
The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
Yes, the Vantage-Q waste container is compatible with the 18 and 19 mm Slim drawer.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
We have an anti-slip mat that is supplied in rolls that are easy to cut to any inside measurement of the drawer. This mat has two roles:It prevents objects moving inside the drawer when it is opened or closed.It prevents the bottom of the drawer being damaged with a graze or little knock when handling objects stored in the drawer.
Yes, the railings are the same for both drawers.
Bottom mounting and automatic extraction systems need to be larger than the width of the container. This is due to the fact that the attaching mechanism needs to occupy a larger space than the width of the container. However, you can always reduce the minimum size of the module and make it function with manual opening.
In order to assemble the plastic base for the fridge, such as the Fridge Base, it is necessary to have the kitchen Bone feet as well as the number 10 metric screw thread (M10) from the same family, as the base as four holes for fastening the feet.The Fridge Base is also perforated for ventilation and designed for fridges to be integrated into 600 mm wide units with tufts for assembly.
The RAL code of the white finish of the profiles system Gola is approximately 9003.The RAL code of the anthracite grey finish of the the profiles system Gola is approximately 7043.The RAL code of the black finish is approximately 9011.
The following video shows how you can easily assemble the profile system Gola.
In order to install the Gola profiles on a unit it is recommended to have gap measurements for being able to open the drawer or the door. These measurements are for guidance purposes and may vary depending on the overlaps.For an upper Gola profile it is recommended to have a 37 mm gap, and for a central Gola profile a 40 mm gap is recommended. The image shows a vertical view of the side of the unit.
Household appliances that can be integrated are completely compatible with the Gola profile system (with or without bumper). Thanks to that compatibility, household appliances remain hidden, thus adding a sense of continuity to kitchen furniture.In order to facilitate the work of manufacturers and assemblers, it is only necessary to bear in mind that the sum of the height along with the base, needs to be greater than the height of the household appliance along with the upper Gola profile that is used. Also, the attached document shows details with practical examples.
The following video shows how you can easily assemble the Gola profile for ovens.
The RAL code of the anthracite grey finish of the sides of the Vertex drawer is approximately 7043.
The RAL code of the grey finish of the sides of the Vertex drawer is approximately 7045.
The RAL code of the white finish of the sides of the Vertex drawer is approximately 9003.
The following video shows how you can easily assemble the Vertex inner drawer.
It is only necessary to connect the machine to air with a pressure of 7-8 kg/cm2
We have a KIT with cod. 5205020 that allows you to transform the AMP connections to Miniled in order to use it with this converter.
Yes, it is the same profile that is used for all four drawer heights. The 178 mm height panel, however, also needs the front rail profile.
The maximum dimensions per door are 2400 high and 500 wide (per door leaf).
The Twofold system offers the versatility of sliding well when assembled with and without a lower guide. Whether it is used depends on the type of wardrobe in which the system is mounted.
The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how you can easily install the Zero system.
The following video shows how you can easily install the Cassiopea backlit bathroom mirror.
Here we will show you how to assemble a Vertex/Concept drawer with the Tecnotool-Pro machine; you will see that it is very simple and very fast thanks to its automatic side stapling system. You will be able to assemble large series of drawers.
Here we will show you how to assemble a Vertex/Concept drawer with the Tecnotool machine, you will see that it is very simple and fast. Thanks to its measurement positioner and its easy handling you will see that it will be very convenient for you.
No, the tabletop is not included, so you can combine it with the rest of the furniture. The components of the table are: 1 electric desktop structure with motor, 1 adapter, 1 up and down switch, instructions for use and mounting screws.
The tabletop must be larger than the structure, therefore it will depend on the chosen width. For the minimum length of 112 cm, the tabletop should measure 120 cm, and for the 152 cm one, it should be at least 160 cm. The minimum width is 60 cm.
The following video shows how you can easily install the aforementioned the Vertikal Push 100 multiconnector.
It depends on the type of front panel you use for the interior drawer:- Aluminium front. This is fitted onto guides at the usual distance, 37 mm in the 4th hole of the guide.- Particle board front. The thickness of this board must be added to the 37 mm of the 4th hole of the guide.In other words, if the front is 19 mm thick, the guide must be fastened at 37 + 19 = 56 mm at the 4th hole of the guide.
The following video shows how you can easily install the Zero system.
The following video shows how you can easily install the Zero system.
The following video shows how you can easily install the Zero system.
The following video shows how you can easily install the Zero system.
The following video shows how you can easily install the Zero system.
Yes, the structure must be fixed to the wall in all cases to avoid it tipping over.
It is very simple – the Hook brackets that fix the profile to the wall have a height regulation of ±5 mm.
These brackets have two screws – one of them attaches the module to the wall, and the other regulates the height and ensures it is fully horizontal.
It is very simple – there is a kit for the three types of board of 12, 16 and 19 mm.
The most common practice is to place the lateral hinges in alignment with the central ones.
However, for closets with really heavy doors, two of the concealed hinges can be placed at the top of the closet to increase resistance and stability.
We would like to remind you that in the case of folding-door or hinged-door assembly, the hanger must go with the lateral supplement.
Yes, it is a cuttable LED strip by its cutting area (every 55.5mm) and can be connected with a cable and even use a connecting fitting.
Yes, they use the same supplements, both without regulation and with eccentric regulation.
Yes, the overlaps are calculated using the same formulas.
The following video shows how a revolving TV base is installed in furniture.
No, it is only compatible for devices that charge using the QI protocol.
Yes, these grommets allow the most common cables and plugs, such as the F-type plug (SHUKO) and G-type plug (UK) to pass through.
It allows to pass cables and plugs type F (SHUKO), except the G-type plug (UK) due to its size.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily assemble the Shot mechanism.
The following video shows how you can easily assemble the Lunch mechanism.
The following video shows how you can easily assemble the Lunch+39 mechanism.
The following video shows how you can easily assemble the Oplà Top mechanism.
The following video shows how you can easily assemble the Oplà Folding+39 mechanism.
The following video shows how you can easily assemble the Party mechanism.
The following video shows how you can easily assemble the Corner mechanism.
The following video shows how you can easily assemble the Sestante mechanism.
The following video shows how you can easily assemble the Twice Top mechanism.
The following video shows how you can easily assemble the Push Lite lock.
The connection for this type of 230V AC sensor with this converter is very straightforward, it does not require tools or electrical know-how. The quick connection including both the cable and the converter should be simply used.
Yes, they are compatible with Alexa and Google Home. Therefore, the RGB LED strip should be linked with the Smart Home application and this, in turn, with Alexa or Google Home.
Yes, the drawer’s width and depth measures are the same. Only the lock pin machining is in a different position.
I can use the Zero cable profile together with Zero cables and connectors to illuminate the shelves, using the lighting that best suits my design or I can backlight the structure by integrating the LED strips in the vertical profiles using the diffuser profile.
Structures fixed only to the wall with 4 anchors (2 Zero wall anchors per vertical profile) support less weight and it is not recommended to load them with more than 80 kg for a structure of 2 vertical profiles with 4 wall anchors. It is very important that the wall fastening is done properly according to the type of surface where the structure will be installed.
It has a thickness of 6 mm.
No, the glass sides are already mounted, just like the traditional metal sides.
Yes, without any problem. However, if the drawers are wider than 600 mm, and in order to guarantee a correct opening of the drawer when pressing on any point of the front of the drawer, it is recommended to mount it.
The rod is supplied with a length valid for modules of 1200 mm, with a side thickness of 16 mm, and can be cut to the size required for our assembly.
No, the minimum installation depth is the same. Drawer depth + 5 mm
Yes, it is possible to recharge the Kaus light with a mobile phone charger. The charger needs to have a type C micro USB and should at least supply 5V DC 1A.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
This light has a range of 400 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043.
The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.
The thickness of the board that the sides of these modules can have is from 16 mm to 19 mm, as the luminaire includes lateral supports that adapt to the desired size.
The supplements or bases that are used along with the hinges have two holes for fastening to the furniture and a third hole for increasing the resistance of the hinge/supplement joint. It is especially designed for facilities that require more resistance such as on doors with pistons.
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how to assemble such a box in a simple way:
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how to assemble such a box in a simple way:
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how this system works:
The following video shows how this system works:
The following video shows how this system works:
The following video shows how such a system is easily assembled:
Yes, although the use of two devices provides greater stability when opening. In addition, it is recommended to use two lifting systems on doors over 1 metre wide.
The following video shows how you can easily assemble the Concept inner drawer.
Yes, the drawer measurements, including its dimensions and machining, are fully compatible. The board cutting measurements, mounting dimensions and placement of the drawer in the module are exactly the same.This allows customers to mount 30 kg Concept slides and 50 kg slides on the same drawer.
The following video shows how you can easily assemble the Slim drawer.
The RAL code of the anthracite grey finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 7043.The RAL code of the white finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 9003. Although it is necessary to bear in mind that the white silk colour of said drawer is metallized and the RAL codes are for flat colours.
The main function of an unsprung hinge is to allow the use of push pieces to open the door with a push system in order to ensure a smoother opening of the door without the inertia generated by an inverted hinge.It can also be used in combination with soft-close hinges on doors with a great number of hinges in order to accelerate the closing speed of the door, since they are compatible with the entire X91 hinge family.
The square rail section of the Slim drawer measures 23 mm by 13 mm and the section with trim measures 25 mm by 15 mm.
Yes, the bottom and the back of the Slim drawer have the same measurements for both the soft closing runners and the push runners.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.
No, each drawer has a synchroniser accessory.
Yes, the Lokbox mechanism is used to fasten the bottom of the drawer to the front part without preventing adjustment of it. It is compatible with the Concept, Slim and Vantage-Q drawers or any drawer. It is especially recommended for very wide drawers used in the furnishings of kitchens, bathrooms, lounges and even inside wardrobes. However, you need to take into account that the installation dimensions change. See diagram.
The following video shows how you can easily assemble the Vantage-Q drawer.
Yes, the bottom and the back of the Vantage-Q drawer have the same measurements for both the soft closing runners and the push runners.
The minimum unit depth required to install a Vantage-Q exterior drawer with push is calculated with the formula: Minimum depth = Depth + 38 mm. In this case the minimum unit depth needed will be 500 + 38 = 538 mm.
The minimum unit depth required to install a Vantage-Q interior drawer with push is calculated with the formula: Min. depth = Depth + 44 mm. In this case the minimum unit depth needed will be 500 + 44 = 544 mm.
The RAL code of the white finish of the sides of the Vantage-Q kitchen drawer is approximately 9003.The RAL code of the grey finish of the sides of the Vantage-Q kitchen drawer is approximately 9006.
In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.
In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.
We have different heights of sides and accessories that make it possible to create different types of drawers.You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.