Wall system kit for the assembly of 1 complete wooden door to be installed on the wall. This system is widely used to separate rooms where space is limited for a conventional door.
The kit includes everything necessary for assembly, it has lower runners, guide and an upper carriage that give it a smooth sliding. The door board is not included.
It has a high load capacity of up to 80kg and bi-directional soft closing, which acts in both directions when opening and closing. In addition, it has a small lever that acts as an anti-derailment system to prevent the door from accidentally swinging off.

The system can be mounted in two different ways, surface-mounted or flush-mounted in the door if it is to be as close as possible to the wall. The minimum door thickness required for mounting is 35 or 40 mm depending on the mounting option.
The door requires lower machining to house the runners and the rail where the guide is inserted. It has a height adjustment of up to 10mm and door tilt adjustment.

For surface mounting, the door must be at least 35 mm thick, while for flush mounting it must be at least 40 mm thick.

If it is mounted in the option with mechanised door, the distance is 10mm.