The set of upper and lower trolleys is a set of pieces that have the function of supporting the doors of a closet and making it possible to slide them along the rail. These are made of steel and aluminum so they are capable of supporting up to a sheet of 85 kg with 50 mm maximum thickness due to design. These pieces are designed for soft closing and can be purchased for both exterior and interior closet doors. They are fixed by means of 8 mm diameter screws, have graduation to level them and their packaging is a complete set of pieces. It should be noted that depending on the thickness of the panel you can purchase them with a separation distance of less than 50 mm

The following video shows how the sliding door system for wardrobes is assembled.

In order to mount the sliders on doors it is possible to use different screw options, always bearing in mind the board thickness of the door: - Euro screws. In this case it is necessary to machine a 5mm diameter hole into the door. For example, for a door thickness of 19 mm we will choose the code. 5044007 with a length of 17 mm. - Self-tapping screws. They can have a 4mm diameter which do not require machining on the board. For example, for a board of 19 mm we will choose a 4 x 20 mm screw with the code. 8218605 or 5032405.

In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.

The following video shows how the sliding door system for wardrobes is assembled.

For the assembly of Adige handle profiles for 18 mm board along with the Space + sliding doors, it is necessary to choose an outside runner with a thickness of 23 mm.