2. Products
  3. Assembly
  4. Certified suspended module hangers
  5. Suspended high module hanger
Primary
PackagingFinishingSKU
500 UnitZinc plated4031905

Product features

  • Hanger designed to hang on the wall the upper modules of cabinets in kitchen, bathroom and home furniture.
  • It stands out for its 7 mm height adjustment, by means of a screw accessible from the top, which varies the position of the module once it is hung on the wall.
  • This model is installed on the outside of the module, indistinctly on the right or left side, screwed on each side with 2 screws Ø4 x 16 mm not included.
  • For its assembly it does not require any machining on the furniture, only for its placement on the wall it is necessary to use the Mini plate.
  • It is made of steel with a zinc-plated finish.

The Mini hanger is designed to hang on the wall the upper modules of cabinets in kitchen, bathroom and home furniture. It stands out for its reduced dimensions and itsheight adjustment of 7 mm that varies the position of the module once it is hung on the wall.

For installation, two hangers are required, one on each side of the module, which are fixed to the outside of the module by screwing them to the sides. In addition, the Mini plate is required for placement on the wall.

Components

500 plates

Documentation

Mini high module plate Mini high module plate product photo
PackagingFinishingSKU
500 UnitNatural steel4032003

hanger for wall units with anti-tilting Mini, Steel, Zinc plated

4031905 / 8432393291123
Essential products

Recently viewed

hanger for wall units with anti-tilting Mini, Steel, Zinc plated product photo
hanger for wall units with anti-tilting Mini, Steel, Zinc plated
View All