Hanger for Strongsuspended base units, this hanger supports heavy loads up to 240 kg (nominal load capacity 120 kg per hanger. Standard EN 15939 in test frame type B).
Perfect for use in any type of furniture in your home, such as kitchen, bathroom or auxiliary furniture.

The hanger must be used with the plate and the lower brackets, these references are supplied separately.
To assemble the hanger and the plate in the upper part, a previous machining must be carried out on the module, which does not interfere with the operation of the upper drawer.
The support for the lower area includes 3D adjustment, vertical, horizontal and depth, there are two types of lower supports, one for the assembly of furniture at a distance of 32 mm from the wall and another model at a distance of 3 mm. No pre-machining is necessary with these brackets.

The following video shows how you can easily install a Strong hanger.

The bottom Strong 32 mm bracket is designed to offer greater adjustment of the position of the unit horizontally and vertically. However, for this unit bracket, it is necessary to have the back part at a minimum distance of 32 mm in relation to the fastening wall.The bottom Strong 3 mm bracket has less adjustment and the back part has to be kept a minimum distance of 3 mm from the fastening wall.