Transmitter for LED sensor Wirly door (proximity) (12V DC) (24V DC), Plastic

5215320 / 8432393306193
Essential products
ModelPackagingFinishingSKU
DOOR SIMPLE / DOOR DOBLE / PROXIMITY DIMMER10 Unit
Not defined
5215320

Product features

  • Wireless detector for Wirly sensor with double function, as a proximity sensor that is activated by the door and as a switch sensor that is operated by hand.
  • The emitter is placed inside the cabinet and turns the luminaire on or off when its detection range of 4 cm is interfered with by opening or closing the cabinet door. In addition, for cabinets with double doors, the sensor is placed in the middle, turning on the light regardless of which door opens first, and keeping the light on until both doors are closed.
  • In its rear part it includes a switch that allows changing the functionality of the sensor, turning it into a proximity sensor to be able to activate it by bringing your hand closer and acting as a switch With a first gesture the luminaire will be turned on, with a second gesture it will be turned off , and if you keep your hand close to the ignition position, you can regulate the intensity of the light.
  • This transmitter is responsible for sending the radio frequency signal to the receiver (sold separately) which must be hidden within a range of approximately 10 m (1 transmitter can be linked with up to 8 receivers and 1 receiver can be linked with up to 10 different emitters).
  • It is valid for 12 DC or 24V DC LED luminaires.
  • The transmitter includes a lithium battery, rechargeable with a 5V DC mobile charger with USB-B cable (not included), which has a duration of 350 power cycles in regular use and 6 months in stand-by. It also has a neodymium magnet with double-sided tape to fix it to the installation surface and a screw if you prefer to fix the magnet directly by screwing.
  • Made of black plastic.

This detector has a double function for the Wirly system, as a proximity sensor that is activated by the door and as a switch sensor that is operated by hand.

The emitter is placed inside the cabinet and turns the luminaire on or off when its detection range of 4 cm is interfered with by opening or closing the cabinet door. In addition, for cabinets with double doors, the sensor is placed in the middle, turning on the light regardless of the door that opens first, and keeping the light on until both doors are closed.

At its back it includes a switch that allows you to change the functionality of the sensor, turning it into a proximity sensor to be able to activate it by bringing your hand closer and acting as a switch. With a first gesture the luminaire will be turned on, with a second gesture it will be turned off , and if you keep your hand close to the ignition position, you can regulate the intensity of the light.

The transmitter can be linked with up to 8 receivers and a receiver can be linked with up to 10 different transmitters. For this reason they are sold separately, to make desired configurations according to the needs of the installation.

Components

1 proximity transmitter, 1 magnet with double-sided adhesive tape and fixing screw, mounting instruction sheet.

Documentation

PowerInputOutputPackagingFinishingSKU
36 W (12V DC) - 72 W (24V DC)12V DC - 24V DC12V DC - 24V DC10 UnitNot defined5215020