bolt, 30, Steel, Zinc plated

8012705 / 8432393119489
Essential products
ABDiametreFZPackagingFinishingSKU
20277EU M691000 Unit
Zinc plated
8012905
30367EU M691000 Unit
Zinc plated
8012705

Product features

The bolt at 20, is made of steel with anti-corrosion galve finish. In its design, a turning head of 9 mm long with a diameter for EU M6 nut, the body of the bolt has a length of 27 mm which is 20 mm if it is measured from the joint hole to the base of the head. The diameter of the body of the piece is Ø 7 mm. The fastening piece that is connected to the bolt must be Ø 14 mm. Likewise, the bolt must be installed with Ø 7.5 mm drill with a length of 20 mm from the edge and its packaging is 1,000 units.

Components

1 perno

Documentation

Board thicknessFXPackagingFinishingSKU
14-16-18EU M8x18.51000 UnitZinc plated8146105
18EU M88.51000 UnitZinc plated8146205
20EU M8x1101000 UnitZinc plated8111805
22EU M8101000 UnitZinc plated8111905
FBoard thicknessXPackagingFinishingSKU
EU M818101000 UnitZinc plated8069005
Board thicknessFXYPackagingFinishingSKU
16EU M8x18141000 UnitZinc plated8010605
18EU M8x1914.51000 UnitZinc plated4435105
18EU M8914.51000 UnitZinc plated4417205
20EU M8x11015.51000 UnitZinc plated8035005
FBoard thicknessXYPackagingFinishingSKU
EU M8x118914.51000 UnitZinc plated4434905
EU M818914.51000 UnitZinc plated4417005

FAQ


In order to know if a screw is compatible with a nut or stud bolt are compatible, we have to look at the internal thread of the screw and at the thread of the nut or stud bolt, which must coincide.For example, if we choose a nut or stud boy with a 6 metric screw thread (M6), the screw also has to have an internal metric thread of 6 (M6).