Taika LED light for Drawers (12V DC), for module 600mm, Aluminium and Plastic, Matt anodised

5216162 / 8432393308487
Essential products
MColour temperaturePowerPackagingFinishingSKU
500Natural white 4.000 K4,1 W1 Unit
Matt anodized
5216062
600Natural white 4.000 K5,2 W1 Unit
Matt anodized
5216162
800Natural white 4.000 K6,6 W1 Unit
Matt anodized
5216262
900Natural white 4.000 K7,5 W1 Unit
Matt anodized
5216362

Product features

  • LED luminaire with an elegant compact design that allows lighting drawers or cabinets, with an integrated proximity sensor (door) that turns the luminaire on when the drawer is opened and turns off when it is closed.
  • It is valid for installation in 600 mm wide modules with a panel thickness of 16 to 19 mm, and adaptable between 562 and 568 mm wide thanks to its lateral supports.
  • For its installation, the supports are screwed on the sides of the module where the luminaire is fixed. On the side of the module, the 500 mm cable gland profile is fixed with double-sided tape, through which the cable is passed to the rear to prevent it from interfering with the movement of the drawer.
  • It works at 12V DC, so it requires an LED converter (not included in the supply), it has a 2 m cable with Miniled connector, and also includes a Miniled to AMP adapter cable.
  • It has low consumption LED technology, with high energy efficiency to provide a bright and uniform light.
  • Natural white color temperature at 4,000 Kelvin.
  • Suitable luminaire for dry areas, IP 20.
  • Luminous flux of 282 lumens.
  • Power 5.2 W.
  • 150º light beam.
  • It is made of aluminum and plastic with a matt anodized finish.

Taika is a longitudinal LED luminaire with an elegant compact design to illuminate the inside of drawers or cabinets. It has an integrated proximity sensor, which turns on the luminaire when the drawer is opened and turns off when it is closed.It also has a high energy efficiency that provides a bright and uniform light.

It is valid for installation in modules of 500, 600, 800 and 900 mm width with board thickness of 16 to 19 mm, depending on the selected model.

For its installation, the supports are screwed on the sides of the module where the luminaire is fixed. On the side of the module, the 500 mm cable gland profile is fixed with double-sided tape, through which the cable is passed to the rear to prevent it from interfering with the movement of the drawer.

It works at 12V DC, so it requires an LED converter (not included in the supply), it has a 2 m cable with a Miniled connector, and it also includes an adapter cable from Miniled to AMP. It is made of aluminum and plastic with a matte anodized finish.

Components

1 LED light with 2 m cable and Miniled connector, 1 adapter cable from Miniled to AMP, 4 screws, 1 500mm cable organiser profile with double-sided tape

Documentation

PowerInputOutputPackagingFinishingSKU
6 W180-240V AC - 50Hz12V DC10 UnitNot defined5211020
15 W180-240V AC - 50Hz12V DC10 UnitNot defined5211120
30 W100-240V AC - 50-60Hz12V DC10 UnitNot defined5147420
50 W100-240V AC - 50-60Hz12V DC10 UnitNot defined5147520
72 W100-240V AC - 50-60Hz12V DC10 UnitNot defined5008520
PowerInputOutputPackagingFinishingSKU
100 W200-240V AC - 50-60Hz12V DC5 UnitNot defined5209320
200 W100-240V AC - 50-60Hz12V DC5 UnitNot defined5203420
200 W100-240V AC - 50-60Hz12V DC5 UnitNot defined5209420