A hinge designed for folding doors, with a carefully considered look and reduced size. Ideal for installing along

with the Miniwinch or Microwinch.

It includes a zamak cover that covers the adjustment and locking screws thus giving a very impeccable final

appearance.

It requires a Ø26 machined hole in the door and in the side.

It has tri-dimensional adjustments: lateral, vertical and frontal, easily applicable using an adjustment screw and a

locking screw.

Made using zamak, with a nickel-plated finish.

Innovative covering caps are available separately and these completely cover the hinge. This covers are available in

the same colours as the Miniwinch covers, in order to match.

The Miniwinch folding door system can be installed in both wooden and aluminium doors.You only need to consider that it needs a door with A+10 where A is the side thickness of the furniture.For example, if the side thickness of the furniture is 19 mm, the door will be fitted at 29 mm.If the aluminium profile is 45 mm wide, it can be fitted because it can go inside the profile.We can also use the Ankor hinge in this combination, because it can fit easily.

The Microwinch folding door system can be installed in both wooden and aluminium doors.You only need to consider that it needs a door with A+13 where A is the side thickness of the furniture.For example, if the side thickness of the furniture is 19 mm, the door will be fitted at 32 mm.If the aluminium profile is 45 mm wide, it can be fitted because it can go inside the profile.We can also use the Ankor hinge in this combination, because it can fit easily.