PackagingDescriptionFinishingHandSKU
250 UnitKnock-inWhiteRight4031115
250 UnitKnock-inWhiteLeft4031215
250 UnitScrew-onWhiteRight4031315
250 UnitScrew-onWhiteLeft4031415

Product features

  • Hanger designed to hang on the wall the upper modules of cabinets in kitchen, bathroom and home furniture.
  • It stands out for its height adjustment of 14 mm and depth of 15 mm, which varies the position of the module once it is hung on the wall.
  • It has a load capacity of up to 35 kg weight per unit and is manufactured according to UNE-EN 15939 standard in type A frame.
  • This model is installed inside the module on the right side and is fastened to the side with 2 mounting plugs Ø10 x 11.5 mm, which require a pre-drilling.
  • For its assembly it requires a 29 x 18 mm machining on the back of the module and for its placement on the wall it is necessary to use the Hover plate.
  • It is made of steel and plastic with white finish.

The Hover hanger is designed to hang on the wall the upper modules of cabinets in kitchen, bathroom and home furniture. It stands out for its height adjustment of 14 mm and depth of 15 mm that varies the position of the module once it is hung on the wall. It has a high resistance and maximum safety, since it has a load capacity of up to 35 kg of weight per unit and is manufactured according to UNE-EN 15939 in type A frame.

For installation, two hangers are required, one on each side of the module, which are fixed to the inside of the module on the sides, screwed or press-fitted depending on the model. In addition, for its assembly it requires machining on the back and for its placement on the wall it is necessary to use the Hover plate..

Components

1 hanger right-hand

Documentation

PackagingFinishingSKU
500 UnitNatural steel4031503

hanger for wall units with anti-tilting Hover, Right, Steel and Plastic, White Plastic

4031115 / 8432393292328
Essential products